On Monday 29 December 2008, Maxim Levitsky wrote: > On Mon, 2008-12-29 at 19:19 +0100, Rafael J. Wysocki wrote: > > From: Rafael J. Wysocki <rjw@xxxxxxx> > > > > According to the ACPI specification the SCI_EN flag is controlled by > > the hardware, which sets this flag to inform the kernel that ACPI is > > enabled. For this reason, we shouldn't try to modify SCI_EN > > directly. Also, we don't need to do it in irqrouter_resume(), since > > lower-level resume code takes care of enabling ACPI in case it hasn't > > been enabled by the BIOS before passing control to the kernel (which > > by the way is against the ACPI specification). > > > Hi, Hi, > I am an unfortunate owner of an acer notebook ( aspire 5720 if this > matters) and it doesn't come back after second suspend, subsequently I > figured out that bios doesn't pass control to linux at all, after second > resume, and moreover, a suspend to disk , 'fixes' this and enables me to > do another suspend/resume cycle. This is a poor man workaround I use > now. I suspect there may be a problem with interrupts handling on your system. There is http://bugzilla.kernel.org/show_bug.cgi?id=11698 describing a very similar (if not the same) issue. Please attach a boot log and the contents of /proc/interrupts to that bug. > I already told about this here, and many peoples from here (including > you) tried to help me, but unfortunately this is very weird issue, and > nether me nor you can do much about, it is all about guesswork, > something, at least something is 'armed' on resume, so it confuses bios > then (it could be that yet, the critical part that confuses bios happens > in second suspend time) > > Needless to say that nothing useful appears in the logs, and everything > seems to work fine following each successful resume (both disk and ram). > > so I have a question, do you have a git branch to pull that includes all > patches like this to test, so I build it weekly, and who knows, maybe > something like above will fix it. Unfortunately, I don't. If I have any patches that can possibly fix the problem, I'll let you know. > Anyway I would gladly test any patch that you suspect might be involved > here. > > Also, I tried to do a I/O port and PCI config dump before and after a > resume, aka in 'armed' and 'unarmed' state. > > While there were many I/O port registers changes, and I yet to process > it bit after bit (and unfortunately there are plenty of undocumented > stuff), I noticed a meaningful change between bad and good state: Please check if the appended patch from Len changes anything. Thanks, Rafael --- Author: Len Brown <len.brown@xxxxxxxxx> Date: Sat Dec 20 12:50:23 2008 +0100 ACPI: PCI Interrupt Links -- disable when unused We start the system off with disabled links. Here we enable the reference counting on the links so that when drivers free IRQs the links can return to the disabled state. Drivers free their IRQ and reference on a link when they unload. They may also do so upon suspend. However, if they don't, irqrouter_resume() will still resume any links that were not disabled before suspend. Signed-off-by: Len Brown <len.brown@xxxxxxxxx> diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 595b131..0f7722d 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -693,18 +693,7 @@ int acpi_pci_link_free_irq(acpi_handle handle) printk(KERN_ERR PREFIX "Link isn't initialized\n"); return -1; } -#ifdef FUTURE_USE - /* - * The Link reference count allows us to _DISable an unused link - * and suspend time, and set it again on resume. - * However, 2.6.12 still has irq_router.resume - * which blindly restores the link state. - * So we disable the reference count method - * to prevent duplicate acpi_pci_link_set() - * which would harm some systems - */ link->refcnt--; -#endif ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link %s is dereferenced %d\n", acpi_device_bid(link->device), link->refcnt)); _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
