This imports the driver model device.power.may_wakeup flags to ACPI,
using it to *REPLACE* the /proc/acpi/wakeup flags for some devices.
It depends on the previous patch making device.power.can_wakeup behave.
It does that by:
- Implementing platform_enable_wakeup(), which is currently invoked only
by pci_enable_wake(). When that's called -- probably in the driver
suspend() call -- it updates acpi_device.wakeup.state.enabled flag in
the same way writing to /proc/acpi/wakeup updates it.
- Updating the usage of the corresponding ACPI flags when turning on
wakeup power domains and GPEs.
THIS PATCH NEEDS MORE ATTENTION because of the way the ACPI method
invocations have been changing, e.g. the 1.0 vs 2.0 sequencing.
Right now it's not clear to me whether the GPEs are always enabled at
the right time, and for that matter whether the rules haven't changed
so that drivers can no longer effectively control those settings from
suspend() unless acpi_new_pts_ordering is in effect.
ACPI systems see behavioral changes as follows:
* Wakeup-aware PCI drivers no longer need to have someone override the
initial system config by writing to /proc/acpi/wakeup; existing calls
to pci_enable_wake() suffice. For wakeup-unaware drivers, it's still
not clearly safe to enable wakeup in /proc/acpi/wakeup.
* Non-PCI frameworks (as for PS2 serial ports) could call the platform
hook like PCI does, supporting wakeup-aware drivers.
* The /sys/devices/.../power/wakeup flags are a different kind of manual
override. They _disable_ wakeup for broken hardware or drivers, rather
than _enabling_ it in the hope that unmodified drivers won't break when
their hardware triggers wakeup events.
NOT YET SIGNED-OFF ... primarily because of the confusion about
the order in which ACPI methods get called during entry to suspend
states. Presumably one of the "new style" PM methods calls will
now always work for drivers wanting to enable wakeup methods...
---
drivers/acpi/sleep/main.c | 2 +-
drivers/acpi/sleep/wakeup.c | 44 ++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 43 insertions(+), 3 deletions(-)
--- g26.orig/drivers/acpi/sleep/main.c 2008-02-24 02:07:57.000000000 -0800
+++ g26/drivers/acpi/sleep/main.c 2008-02-24 02:08:04.000000000 -0800
@@ -470,7 +470,7 @@ int acpi_pm_device_sleep_state(struct de
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (device_may_wakeup(dev) && adev->wakeup.state.enabled &&
+ (device_may_wakeup(dev) &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
acpi_status status;
--- g26.orig/drivers/acpi/sleep/wakeup.c 2008-02-24 02:03:27.000000000 -0800
+++ g26/drivers/acpi/sleep/wakeup.c 2008-02-24 02:08:04.000000000 -0800
@@ -35,12 +35,22 @@ void acpi_enable_wakeup_device_prep(u8 s
struct acpi_device *dev = container_of(node,
struct acpi_device,
wakeup_list);
+ struct device *ldev;
if (!dev->wakeup.flags.valid ||
!dev->wakeup.state.enabled ||
(sleep_state > (u32) dev->wakeup.sleep_state))
continue;
+ ldev = acpi_get_physical_device(dev->handle);
+ if (ldev) {
+ int flag = device_may_wakeup(ldev);
+
+ put_device(ldev);
+ if (!flag)
+ continue;
+ }
+
spin_unlock(&acpi_device_lock);
acpi_enable_wakeup_device_power(dev);
spin_lock(&acpi_device_lock);
@@ -57,8 +67,8 @@ void acpi_enable_wakeup_device(u8 sleep_
{
struct list_head *node, *next;
- /*
- * Caution: this routine must be invoked when interrupt is disabled
+ /*
+ * Caution: this routine must be invoked when interrupt is disabled
* Refer ACPI2.0: P212
*/
ACPI_FUNCTION_TRACE("acpi_enable_wakeup_device");
@@ -107,6 +117,7 @@ void acpi_disable_wakeup_device(u8 sleep
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
+ struct device *ldev;
if (!dev->wakeup.flags.valid)
continue;
@@ -125,6 +136,15 @@ void acpi_disable_wakeup_device(u8 sleep
continue;
}
+ ldev = acpi_get_physical_device(dev->handle);
+ if (ldev) {
+ int flag = device_may_wakeup(ldev);
+
+ put_device(ldev);
+ if (!flag)
+ continue;
+ }
+
spin_unlock(&acpi_device_lock);
acpi_disable_wakeup_device_power(dev);
/* Never disable run-wake GPE */
@@ -139,6 +159,24 @@ void acpi_disable_wakeup_device(u8 sleep
spin_unlock(&acpi_device_lock);
}
+static int acpi_platform_enable_wakeup(struct device *dev, int is_on)
+{
+ struct acpi_device *adev;
+ int status;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+ if (is_on && !device_may_wakeup(dev))
+ return -EINVAL;
+
+ status = acpi_bus_get_device(DEVICE_ACPI_HANDLE(dev), &adev);
+ if (status < 0)
+ return status;
+
+ adev->wakeup.state.enabled = !!is_on;
+ return 0;
+}
+
static int __init acpi_wakeup_device_init(void)
{
struct list_head *node, *next;
@@ -146,6 +184,8 @@ static int __init acpi_wakeup_device_ini
if (acpi_disabled)
return 0;
+ platform_enable_wakeup = acpi_platform_enable_wakeup;
+
spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
