On Tue, 26 Jun 2007 08:22:11 -0700 (PDT) bugme-daemon@xxxxxxxxxxxxxxxxxxx wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=8678 > > Summary: Kernel OOPSes when suspend/resume > Product: Power Management > Version: 2.5 > KernelVersion: 2.6.21.5 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: high > Priority: P1 > Component: Hibernation/Suspend > AssignedTo: power-management_other@xxxxxxxxxxxxxxxxxxxx > ReportedBy: cijoml@xxxxxxxx > > > Most recent kernel where this bug did not occur: > Distribution: Debian Etch > Hardware Environment: Laptop Prestigio (Pentium M) > Software Environment: 2.6.21.5, v4l-dvb-b03a5545f8e1 > Problem Description: > > -------------- > Stopping tasks ... done. > Shrinking memory... done (0 pages freed) > Freed 0 kbytes in 0.02 seconds (0.00 MB/s) > Suspending console(s) > dvb_usb_dib0700 4-1:1.0: no suspend for driver dvb_usb_dib0700? > eth2: Going into suspend... > ACPI: PCI interrupt for device 0000:02:0c.0 disabled > radeonfb (0000:01:00.0): suspending for event: 1... > ACPI: PCI interrupt for device 0000:00:1f.6 disabled > ACPI: PCI interrupt for device 0000:00:1f.5 disabled > ACPI: PCI interrupt for device 0000:00:1d.7 disabled > ACPI: PCI interrupt for device 0000:00:1d.2 disabled > ACPI: PCI interrupt for device 0000:00:1d.1 disabled > ACPI: PCI interrupt for device 0000:00:1d.0 disabled > swsusp: critical section: > swsusp: Need to copy 112337 pages > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> > IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > usb usb1: root hub lost power or was reset > ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> > IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > usb usb2: root hub lost power or was reset > ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> > IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > usb usb3: root hub lost power or was reset > ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> > IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> > IRQ 11 > PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, > writing 2900003) > ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ > 9 > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, > writing 2900001) > ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ > 9 > PCI: Setting latency timer of device 0000:00:1f.6 to 64 > radeonfb (0000:01:00.0): resuming from state: 1... > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[ffdff800-ffdfffff] > Max Packet=[2048] IR/IT contexts=[4/8] > eth0: link down > Yenta O2: res at 0x94/0xD4: 00/ea > Yenta O2: enabling read prefetch/write burst > eth2: Coming out of suspend... > ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ > 9 > pnp: Failed to activate device 00:03. > pnp: Failed to activate device 00:04. > usbdev4.12_ep00: PM: resume from 0, parent 4-1 still 1 > dvb_usb_dib0700 4-1:1.0: PM: resume from 1, parent 4-1 still 1 > i2c_adapter i2c-5: PM: resume from 0, parent 4-1 still 1 > usbdev4.12_ep01: PM: resume from 0, parent 4-1:1.0 still 1 > usbdev4.12_ep81: PM: resume from 0, parent 4-1:1.0 still 1 > usbdev4.12_ep82: PM: resume from 0, parent 4-1:1.0 still 1 > usbdev4.12_ep83: PM: resume from 0, parent 4-1:1.0 still 1 > usbdev4.12: PM: resume from 0, parent 4-1 still 1 > usbdev1.8_ep00: PM: resume from 0, parent 1-2 still 1 > hci_usb 1-2:1.0: PM: resume from 1, parent 1-2 still 1 > hci0: PM: resume from 0, parent 1-2:1.0 still 1 > usbdev1.8_ep81: PM: resume from 0, parent 1-2:1.0 still 1 > usbdev1.8_ep02: PM: resume from 0, parent 1-2:1.0 still 1 > usbdev1.8_ep82: PM: resume from 0, parent 1-2:1.0 still 1 > hci_usb 1-2:1.1: PM: resume from 1, parent 1-2 still 1 > usbdev1.8_ep03: PM: resume from 0, parent 1-2:1.1 still 1 > usbdev1.8_ep83: PM: resume from 0, parent 1-2:1.1 still 1 > usbdev1.8: PM: resume from 0, parent 1-2 still 1 > Restarting tasks ... done. > __tx_submit: hci0 tx submit failed urb f22ca854 type 1 err -19 > usb 1-2: USB disconnect, address 8 > agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. > agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode > agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode > [drm] Loading R300 Microcode > BUG: unable to handle kernel NULL pointer dereference at virtual address > 00000000 > printing eip: > c014787a > *pde = 00000000 > Oops: 0000 [#1] > PREEMPT > Modules linked in: michael_mic arc4 ecb blkcipher ieee80211_crypt_tkip > xt_TCPMSS xt_tcpmss xt_tcpudp iptable_mangle ip_tables x_table > s ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc mt2060 > dvb_usb_dib0700 dib7000m dib7000p dvb_usb dvb_core di > b3000mc dibx000_common bnep rfcomm hidp hid l2cap capability commoncap eeprom > sr_mod sbp2 scsi_mod 8250_pci 8250 serial_core eth1394 > hci_usb bluetooth snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_seq_oss > ac97_bus snd_seq_midi_event snd_seq snd_seq_device snd_pcm_os > s snd_mixer_oss ipw2200 8139too ieee80211 ieee80211_crypt snd_pcm snd_timer > iTCO_wdt ehci_hcd mii ohci1394 ieee1394 rtc uhci_hcd snd > snd_page_alloc ide_cd i2c_i801 pcspkr cdrom > CPU: 0 > EIP: 0060:[<c014787a>] Not tainted VLI > EFLAGS: 00010203 (2.6.21 #4) > EIP is at put_page+0x5/0xb2 > eax: 00000000 ebx: 00000000 ecx: c0317380 edx: f63f70c0 > esi: ea6e2680 edi: f784dd84 ebp: f784de48 esp: f784dd4c > ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 > Process syslogd (pid: 3160, ti=f784c000 task=f7995070 task.ti=f784c000) > Stack: 00000001 ea6e2680 f784dd84 c02aebed ea6e2680 f784df20 c02aea21 ea6e26b0 > c02f58fb 00000036 000001ff f7ca36c0 f7dcfb00 ea6e2680 00000d1f 00000000 > 00000000 00000000 00000001 00000000 000001ff 0ac3ac80 00000036 c0317380 > Call Trace: > [<c02aebed>] skb_release_data+0x4e/0x80 > [<c02aea21>] kfree_skbmem+0x8/0x61 > [<c02f58fb>] unix_dgram_recvmsg+0x214/0x239 > [<c02a9e24>] sock_recvmsg+0xec/0x107 > [<c0128b23>] autoremove_wake_function+0x0/0x35 > [<c0166775>] core_sys_select+0x1aa/0x2bc > [<c0160a26>] pipe_write+0x356/0x3ed > [<c015ae4d>] do_sync_readv_writev+0xc1/0xfe > [<c02aad15>] sys_recvfrom+0xd7/0x12b > [<c0128b23>] autoremove_wake_function+0x0/0x35 > [<c02aada0>] sys_recv+0x37/0x3b > [<c02ab283>] sys_socketcall+0x19c/0x261 > [<c0120dc5>] sigprocmask+0x94/0xb1 > [<c0103cdc>] syscall_call+0x7/0xb > ======================= > Code: 42 c0 e8 66 fe ff ff 89 e0 25 00 e0 ff ff ff 48 14 8b 40 08 a8 08 74 05 > e9 18 0f 1b 00 c3 e8 b4 ff ff ff 31 c0 c3 57 56 53 89 c > 3 <8b> 00 f6 c4 40 74 0a 89 d8 > 5b 5e 5f e9 e9 fb ff ff ff 4b 04 0f > EIP: [<c014787a>] put_page+0x5/0xb2 SS:ESP 0068:f784dd4c Good heavens. Does it oops every time? And does the oops trace always look like this? > usb 4-1: USB disconnect, address 12 > dvb-usb: Leadtek Winfast DTV Dongle (STK7700P based) successfully deinitialized > and disconnected. > usb 4-1: new high speed USB device using ehci_hcd and address 14 > usb 4-1: configuration #1 chosen from 1 choice > dvb-usb: found a 'Leadtek Winfast DTV Dongle (STK7700P based)' in cold state, > will try to load a firmware > dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' > dib0700: firmware started successfully. > dvb-usb: found a 'Leadtek Winfast DTV Dongle (STK7700P based)' in warm state. > i2c_adapter i2c-5: SMBus Quick command not supported, can't probe for chips > dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. > DVB: registering new adapter (Leadtek Winfast DTV Dongle (STK7700P based)) > i2c_adapter i2c-6: SMBus Quick command not supported, can't probe for chips > DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)... > MT2060: successfully identified (IF1 = 1220) > dvb-usb: Leadtek Winfast DTV Dongle (STK7700P based) successfully initialized > and connected. > usb 1-2: new full speed USB device using uhci_hcd and address 9 > usb 1-2: configuration #1 chosen from 1 choice > > > ---------------- > Steps to reproduce: > > suspend/resume > > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug, or are watching someone who is. _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
