A PowerOP sysfs UI backend for OMAP1 platforms, adding sysfs attributes
and show/store functions that correspond to the platform power
parameters.
An example usage on an OMAP1510 Innovator which does not have voltage
scaling and ignoring the DSP:
# echo -n 168-168-84 > /sys/powerop/new # DPLL 168MHz, ARM 168MHz, TC 84MHz
# echo -n 14 > /sys/powerop/168-168-84/dpllmult
# echo -n 0 > /sys/powerop/168-168-84/dplldiv
# echo -n 0 > /sys/powerop/168-168-84/armdiv
# echo -n 1 > /sys/powerop/168-168-84/tcdiv
# echo -n -1 > /sys/powerop/168-168-84/dspdiv
# echo -n -1 > /sys/powerop/168-168-84/lowpwr
# echo -n 60-60-60 > /sys/powerop/new # DPLL 60MHz, ARM 60MHz, TC 60MHz
# echo -n 5 > /sys/powerop/60-60-60/dpllmult
# echo -n 0 > /sys/powerop/60-60-60/dplldiv
# echo -n 0 > /sys/powerop/60-60-60/armdiv
# echo -n 0 > /sys/powerop/60-60-60/tcdiv
# echo -n -1 > /sys/powerop/60-60-60/dspdiv
# echo -n -1 > /sys/powerop/60-60-60/lowpwr
# echo -n 60-60-60 > /sys/powerop/active
# cat /sys/powerop/hw/dpllmult
5
The lower-powered operating point consumes about .07A less power using
my .config (it should be noted this is not a proper low-power evaluation
platform).
Index: linux-2.6.13-rc4/arch/arm/mach-omap1/Kconfig
===================================================================
--- linux-2.6.13-rc4.orig/arch/arm/mach-omap1/Kconfig
+++ linux-2.6.13-rc4/arch/arm/mach-omap1/Kconfig
@@ -155,3 +155,5 @@ source "arch/arm/plat-omap/dsp/Kconfig"
config POWEROP
bool "PowerOP Platform Core Power Management for OMAP1"
help
+
+source "drivers/powerop/Kconfig"
Index: linux-2.6.13-rc4/arch/arm/mach-omap1/powerop.c
===================================================================
--- linux-2.6.13-rc4.orig/arch/arm/mach-omap1/powerop.c
+++ linux-2.6.13-rc4/arch/arm/mach-omap1/powerop.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/powerop_sysfs.h>
#include <asm/arch/powerop.h>
#include <asm/hardware.h>
@@ -144,13 +145,141 @@ powerop_set_point(struct powerop_point *
EXPORT_SYMBOL_GPL(powerop_get_point);
EXPORT_SYMBOL_GPL(powerop_set_point);
+#ifdef CONFIG_POWEROP_SYSFS
+
+ssize_t lowpwr_show(struct powerop_point *op, char * buf)
+{
+ return sprintf(buf,"%d\n",op->lowpwr);
+}
+
+ssize_t lowpwr_store(struct powerop_point *op, const char * buf, size_t count)
+{
+ int error;
+
+ if ((error = sscanf(buf, "%d", &op->lowpwr)) == 1)
+ return count;
+ return error;
+}
+
+powerop_param_attr(lowpwr);
+
+ssize_t dpllmult_show(struct powerop_point *op, char * buf)
+{
+ return sprintf(buf,"%d\n",op->dpllmult);
+}
+
+ssize_t dpllmult_store(struct powerop_point *op, const char * buf, size_t count)
+{
+ int error;
+
+ if ((error = sscanf(buf, "%d", &op->dpllmult)) == 1)
+ return count;
+ return error;
+}
+
+powerop_param_attr(dpllmult);
+
+ssize_t dplldiv_show(struct powerop_point *op, char * buf)
+{
+ return sprintf(buf,"%d\n",op->dplldiv);
+}
+
+ssize_t dplldiv_store(struct powerop_point *op, const char * buf, size_t count)
+{
+ int error;
+
+ if ((error = sscanf(buf, "%d", &op->dplldiv)) == 1)
+ return count;
+ return error;
+}
+
+powerop_param_attr(dplldiv);
+
+ssize_t armdiv_show(struct powerop_point *op, char * buf)
+{
+ return sprintf(buf,"%d\n",op->armdiv);
+}
+
+ssize_t armdiv_store(struct powerop_point *op, const char * buf, size_t count)
+{
+ int error;
+
+ if ((error = sscanf(buf, "%d", &op->armdiv)) == 1)
+ return count;
+ return error;
+}
+
+powerop_param_attr(armdiv);
+
+ssize_t dspdiv_show(struct powerop_point *op, char * buf)
+{
+ return sprintf(buf,"%d\n",op->dspdiv);
+}
+
+ssize_t dspdiv_store(struct powerop_point *op, const char * buf, size_t count)
+{
+ int error;
+
+ if ((error = sscanf(buf, "%d", &op->dspdiv)) == 1)
+ return count;
+ return error;
+}
+
+powerop_param_attr(dspdiv);
+
+ssize_t tcdiv_show(struct powerop_point *op, char * buf)
+{
+ return sprintf(buf,"%d\n",op->tcdiv);
+}
+
+ssize_t tcdiv_store(struct powerop_point *op, const char * buf, size_t count)
+{
+ int error;
+
+ if ((error = sscanf(buf, "%d", &op->tcdiv)) == 1)
+ return count;
+ return error;
+}
+
+powerop_param_attr(tcdiv);
+
+static struct attribute *powerop_sysfs_param_attrs[] = {
+ &lowpwr_attr.attr,
+ &dpllmult_attr.attr,
+ &dplldiv_attr.attr,
+ &armdiv_attr.attr,
+ &dspdiv_attr.attr,
+ &tcdiv_attr.attr,
+ NULL,
+};
+
+static void powerop_omap1_sysfs_init()
+{
+ powerop_sysfs_register(powerop_sysfs_param_attrs);
+}
+
+static void powerop_omap1_sysfs_exit()
+{
+ powerop_sysfs_unregister(powerop_sysfs_param_attrs);
+}
+#else /* CONFIG_POWEROP_SYSFS */
+static void powerop_omap1_sysfs_init()
+{
+}
+static void powerop_omap1_sysfs_exit()
+{
+}
+#endif /* CONFIG_POWEROP_SYSFS */
+
static int __init powerop_init(void)
{
+ powerop_omap1_sysfs_init();
return 0;
}
static void __exit powerop_exit(void)
{
+ powerop_omap1_sysfs_exit();
}
module_init(powerop_init);
