Hi!
> > > > Thing is, it's the system power states that are placing clock
> > > > constraints on devices. On OMAP, going into "deep sleep" means
> > > > you've got to stop using the 48 MHz clock. For "big sleep",
> > > > you can keep using that clock. Most other CPUs have similar
> > > > constraints: multiple system states, defined primarily by
> > > > clock usage.
> > >
> > >
> > > So to focus on one point: "pm_message_t" doesn't work well
> > > at all, since it doesn't have a way to identify the target
> > > system power state, and drivers thus have no way to see if
> > > they should drop their requests for those clocks or whether
> > > the hardware should keep working away.
> >
> > Well, in current model,
>
> That is, after pm_message_t change. That represents a loss of
> functionality. Previously drivers received a target system
> sleep state, and could make such deductions easily: anything
> like a PCI D3cold ("4") means maximal power off, anything like
> a PCI D3hot ("3") is less aggressive, and so on. (Not that all
> drivers behaved right, or that the different incarnations of
> the "pm core" code used "3" vs "4" sanely, etc.)
>
> So maybe one question for tomorrow should be how we'll restore
> that temporarily-list functionality.
pm_message_t change is not done, yet. It is going to be structure, and
it will have second field "flags" that will address your concerns.
Here's patch doing that... It may even make it into 2.6.12.
Pavel
--- clean/drivers/base/power/resume.c 2004-12-25 13:34:59.000000000 +0100
+++ linux/drivers/base/power/resume.c 2005-03-22 12:20:53.000000000 +0100
@@ -41,7 +41,7 @@
list_add_tail(entry, &dpm_active);
up(&dpm_list_sem);
- if (!dev->power.prev_state)
+ if (!dev->power.prev_state.event)
resume_device(dev);
down(&dpm_list_sem);
put_device(dev);
--- clean/drivers/base/power/runtime.c 2005-01-12 11:07:39.000000000 +0100
+++ linux/drivers/base/power/runtime.c 2005-03-22 12:20:53.000000000 +0100
@@ -13,10 +13,10 @@
static void runtime_resume(struct device * dev)
{
dev_dbg(dev, "resuming\n");
- if (!dev->power.power_state)
+ if (!dev->power.power_state.event)
return;
if (!resume_device(dev))
- dev->power.power_state = 0;
+ dev->power.power_state = PMSG_ON;
}
@@ -49,10 +49,10 @@
int error = 0;
down(&dpm_sem);
- if (dev->power.power_state == state)
+ if (dev->power.power_state.event == state.event)
goto Done;
- if (dev->power.power_state)
+ if (dev->power.power_state.event)
runtime_resume(dev);
if (!(error = suspend_device(dev, state)))
--- clean/drivers/base/power/shutdown.c 2004-08-15 19:14:55.000000000 +0200
+++ linux/drivers/base/power/shutdown.c 2005-03-22 12:20:53.000000000 +0100
@@ -29,7 +29,8 @@
dev->driver->shutdown(dev);
return 0;
}
- return dpm_runtime_suspend(dev, dev->detach_state);
+ /* FIXME */
+ return dpm_runtime_suspend(dev, PMSG_FREEZE);
}
--- clean/drivers/base/power/suspend.c 2005-01-12 11:07:39.000000000 +0100
+++ linux/drivers/base/power/suspend.c 2005-03-22 12:20:53.000000000 +0100
@@ -43,7 +43,7 @@
dev->power.prev_state = dev->power.power_state;
- if (dev->bus && dev->bus->suspend && !dev->power.power_state)
+ if (dev->bus && dev->bus->suspend && (!dev->power.power_state.event))
error = dev->bus->suspend(dev, state);
return error;
--- clean/drivers/base/power/sysfs.c 2004-08-15 19:14:55.000000000 +0200
+++ linux/drivers/base/power/sysfs.c 2005-03-22 12:20:53.000000000 +0100
@@ -26,19 +26,20 @@
static ssize_t state_show(struct device * dev, char * buf)
{
- return sprintf(buf, "%u\n", dev->power.power_state);
+ return sprintf(buf, "%u\n", dev->power.power_state.event);
}
static ssize_t state_store(struct device * dev, const char * buf, size_t n)
{
- u32 state;
+ pm_message_t state;
char * rest;
int error = 0;
- state = simple_strtoul(buf, &rest, 10);
+ state.event = simple_strtoul(buf, &rest, 10);
+// state.flags = PFL_RUNTIME;
if (*rest)
return -EINVAL;
- if (state)
+ if (state.event)
error = dpm_runtime_suspend(dev, state);
else
dpm_runtime_resume(dev);
--- clean/drivers/ide/ide.c 2005-03-19 00:31:23.000000000 +0100
+++ linux/drivers/ide/ide.c 2005-03-22 12:20:53.000000000 +0100
@@ -1390,7 +1390,7 @@
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
- rqpm.pm_state = state;
+ rqpm.pm_state = state.event;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
@@ -1409,7 +1409,7 @@
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
- rqpm.pm_state = 0;
+ rqpm.pm_state = PM_EVENT_ON;
return ide_do_drive_cmd(drive, &rq, ide_head_wait);
}
--- clean/drivers/pci/pci.c 2005-03-19 00:31:43.000000000 +0100
+++ linux/drivers/pci/pci.c 2005-03-22 12:20:53.000000000 +0100
@@ -312,22 +312,24 @@
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
- * @state: target sleep state for the whole system
+ * @state: target sleep state for the whole system. This is the value
+ * that is passed to suspend() function.
*
* Returns PCI power state suitable for given device and given system
* message.
*/
-pci_power_t pci_choose_state(struct pci_dev *dev, u32 state)
+pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
- if (!pci_find_capability(dev, PCI_CAP_ID_PM))
+ switch (state.event) {
+ case PM_EVENT_ON:
return PCI_D0;
-
- switch (state) {
- case 0: return PCI_D0;
- case 2: return PCI_D2;
- case 3: return PCI_D3hot;
- default: BUG();
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_SUSPEND:
+ return PCI_D3hot;
+ default:
+ printk("They asked me for state %d\n", state.event);
+ BUG();
}
return PCI_D0;
}
--- clean/drivers/usb/core/hcd-pci.c 2005-03-19 00:31:51.000000000 +0100
+++ linux/drivers/usb/core/hcd-pci.c 2005-03-22 12:20:53.000000000 +0100
@@ -68,7 +68,7 @@
if (pci_enable_device (dev) < 0)
return -ENODEV;
dev->current_state = 0;
- dev->dev.power.power_state = 0;
+ dev->dev.power.power_state.event = 0;
if (!dev->irq) {
dev_err (&dev->dev,
@@ -291,9 +294,6 @@
break;
}
- /* update power_state **ONLY** to make sysfs happier */
- if (retval == 0)
- dev->dev.power.power_state = state;
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_suspend);
--- clean/drivers/usb/core/hub.c 2005-03-19 00:31:51.000000000 +0100
+++ linux/drivers/usb/core/hub.c 2005-03-22 12:20:53.000000000 +0100
@@ -1557,7 +1557,7 @@
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state <= intf->dev.power.power_state)
+ if (state.event <= intf->dev.power.power_state.event)
continue;
if (!intf->dev.driver)
continue;
@@ -1565,11 +1565,11 @@
if (driver->suspend) {
status = driver->suspend(intf, state);
- if (intf->dev.power.power_state != state
+ if (intf->dev.power.power_state.event != state.event
|| status)
dev_err(&intf->dev,
"suspend %d fail, code %d\n",
- state, status);
+ state.event, status);
}
/* only drivers with suspend() can ever resume();
@@ -1582,7 +1582,7 @@
* since we know every driver's probe/disconnect works
* even for drivers that can't suspend.
*/
- if (!driver->suspend || state > PM_SUSPEND_MEM) {
+ if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
#if 1
dev_warn(&intf->dev, "resume is unsafe!\n");
#else
@@ -1603,7 +1603,7 @@
* policies (when HNP doesn't apply) once we have mechanisms to
* turn power back on! (Likely not before 2.7...)
*/
- if (state > PM_SUSPEND_MEM) {
+ if (state.event > PM_EVENT_FREEZE) {
dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
}
@@ -1718,7 +1718,7 @@
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
continue;
if (!intf->dev.driver) {
/* FIXME maybe force to alt 0 */
@@ -1732,11 +1732,11 @@
/* can we do better than just logging errors? */
status = driver->resume(intf);
- if (intf->dev.power.power_state != PM_SUSPEND_ON
+ if (intf->dev.power.power_state.event != PM_EVENT_ON
|| status)
dev_dbg(&intf->dev,
"resume fail, state %d code %d\n",
- intf->dev.power.power_state, status);
+ intf->dev.power.power_state.event, status);
}
status = 0;
@@ -1917,7 +1917,7 @@
unsigned port1;
int status;
- if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
return 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
--- clean/drivers/usb/core/usb.c 2005-03-19 00:31:51.000000000 +0100
+++ linux/drivers/usb/core/usb.c 2005-03-22 12:20:53.000000000 +0100
@@ -1367,7 +1367,7 @@
driver = to_usb_driver(dev->driver);
/* there's only one USB suspend state */
- if (intf->dev.power.power_state)
+ if (intf->dev.power.power_state.event)
return 0;
if (driver->suspend)
--- clean/drivers/usb/host/ehci-dbg.c 2005-01-12 11:07:40.000000000 +0100
+++ linux/drivers/usb/host/ehci-dbg.c 2005-03-22 12:20:53.000000000 +0100
@@ -641,7 +641,7 @@
spin_lock_irqsave (&ehci->lock, flags);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"SUSPENDED (no register access)\n",
--- clean/drivers/usb/host/ohci-dbg.c 2005-03-19 00:31:53.000000000 +0100
+++ linux/drivers/usb/host/ohci-dbg.c 2005-03-22 12:20:53.000000000 +0100
@@ -625,7 +625,7 @@
hcd->self.controller->bus_id,
hcd_name);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
--- clean/drivers/usb/host/sl811-hcd.c 2005-03-19 00:31:53.000000000 +0100
+++ linux/drivers/usb/host/sl811-hcd.c 2005-03-22 12:20:53.000000000 +0100
@@ -1781,9 +1781,9 @@
if (phase != SUSPEND_POWER_DOWN)
return retval;
- if (state <= PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
retval = sl811h_hub_suspend(hcd);
- else
+ else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
dev->power.power_state = state;
@@ -1802,14 +1802,14 @@
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
- if (dev->power.power_state > PM_SUSPEND_MEM
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND
|| !hcd->can_wakeup) {
sl811->port1 = 0;
port_power(sl811, 1);
return 0;
}
- dev->power.power_state = PM_SUSPEND_ON;
+ dev->power.power_state = PMSG_ON;
return sl811h_hub_resume(hcd);
}
--- clean/drivers/video/aty/atyfb_base.c 2005-03-19 00:31:59.000000000 +0100
+++ linux/drivers/video/aty/atyfb_base.c 2005-03-22 12:20:53.000000000 +0100
@@ -2070,12 +2070,12 @@
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
acquire_console_sem();
- if (pdev->dev.power.power_state == 2)
+ if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
par->asleep = 0;
--- clean/drivers/video/aty/radeon_pm.c 2005-03-19 00:31:59.000000000 +0100
+++ linux/drivers/video/aty/radeon_pm.c 2005-03-22 12:20:53.000000000 +0100
@@ -2519,33 +2519,26 @@
}
-static/*extern*/ int susdisking = 0;
-
-int radeonfb_pci_suspend(struct pci_dev *pdev, u32 state)
+int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
u8 agp;
int i;
- if (state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
- pci_name(pdev), state);
+ pci_name(pdev), state.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
- if (state != PM_SUSPEND_MEM)
- goto done;
- if (susdisking) {
- printk("radeonfb (%s): suspending to disk but state = %d\n",
- pci_name(pdev), state);
+ if (state.event == PM_EVENT_FREEZE)
goto done;
- }
acquire_console_sem();
@@ -2637,7 +2630,7 @@
struct radeonfb_info *rinfo = info->par;
int rc = 0;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
if (rinfo->no_schedule) {
@@ -2647,7 +2640,7 @@
acquire_console_sem();
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
- pci_name(pdev), pdev->dev.power.power_state);
+ pci_name(pdev), pdev->dev.power.power_state.event);
if (pci_enable_device(pdev)) {
@@ -2658,7 +2651,7 @@
}
pci_set_master(pdev);
- if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
/* Wakeup chip. Check from config space if we were powered off
* (todo: additionally, check CLK_PIN_CNTL too)
*/
--- clean/drivers/video/i810/i810_main.c 2005-03-19 00:32:00.000000000 +0100
+++ linux/drivers/video/i810/i810_main.c 2005-03-22 12:20:53.000000000 +0100
@@ -1492,18 +1492,18 @@
/***********************************************************************
* Power Management *
***********************************************************************/
-static int i810fb_suspend(struct pci_dev *dev, u32 state)
+static int i810fb_suspend(struct pci_dev *dev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(dev);
struct i810fb_par *par = (struct i810fb_par *) info->par;
int blank = 0, prev_state = par->cur_state;
- if (state == prev_state)
+ if (state.event == prev_state)
return 0;
- par->cur_state = state;
+ par->cur_state = state.event;
- switch (state) {
+ switch (state.event) {
case 1:
blank = VESA_VSYNC_SUSPEND;
break;
@@ -1524,7 +1524,7 @@
pci_disable_device(dev);
}
pci_save_state(dev);
- pci_set_power_state(dev, state);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
--- clean/include/linux/pm.h 2005-03-19 00:32:25.000000000 +0100
+++ linux/include/linux/pm.h 2005-03-22 12:25:54.000000000 +0100
@@ -185,7 +185,10 @@
struct device;
-typedef u32 __bitwise pm_message_t;
+typedef struct pm_message {
+ int event;
+ int flags;
+} pm_message_t;
/*
* There are 4 important states driver can be in:
@@ -205,9 +208,15 @@
* or something similar soon.
*/
-#define PMSG_FREEZE ((__force pm_message_t) 3)
-#define PMSG_SUSPEND ((__force pm_message_t) 3)
-#define PMSG_ON ((__force pm_message_t) 0)
+#define PM_EVENT_ON 0
+#define PM_EVENT_FREEZE 1
+#define PM_EVENT_SUSPEND 2
+
+#define PFL_RUNTIME 1
+
+#define PMSG_FREEZE ({struct pm_message m; m.event = PM_EVENT_FREEZE; m.flags = 0; m; })
+#define PMSG_SUSPEND ({struct pm_message m; m.event = PM_EVENT_SUSPEND; m.flags = 0; m; })
+#define PMSG_ON ({struct pm_message m; m.event = PM_EVENT_ON; m.flags = 0; m; })
struct dev_pm_info {
pm_message_t power_state;
--
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
