Old ATF automatically power on pcie phy and does not provide SMC call for
phy power on functionality which leads to aardvark initialization failure:
[ 0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
[ 0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95
[ 0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95)
[ 0.351160] advk-pcie: probe of d0070000.pcie failed with error -95
This patch fixes above failure by ignoring 'not supported' error in
aardvark driver. In this case it is expected that phy is already power on.
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
---
drivers/pci/controller/pci-aardvark.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index c5d1bb3d52e4..e1a80c35c73d 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1108,7 +1108,9 @@ static int advk_pcie_enable_phy(struct advk_pcie *pcie)
}
ret = phy_power_on(pcie->phy);
- if (ret) {
+ if (ret == -EOPNOTSUPP) {
+ dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n");
+ } else if (ret) {
phy_exit(pcie->phy);
return ret;
}
--
2.20.1
