Hi Ansuel, Please run "checkpatch --strict" for the next version. On 4/2/20 3:11 PM, Ansuel Smith wrote: > This contains multiple fix for PCIe qcom driver. > Some optional reset and clocks were missing. > Fix a problem with no PARF programming that cause kernel lock on load. > Add support to force gen 1 speed if needed. (due to hardware limitation) > Add ipq8064 rev 2 support that use a different tx termination offset. > > v2: > * Drop iATU programming (already done in pcie init) > * Use max-link-speed instead of force-gen1 custom definition > * Drop MRRS to 256B (Can't find a realy reason why this was suggested) > * Introduce a new variant for different revision of ipq8064 > > Abhishek Sahu (1): > PCIe: qcom: change duplicate PCI reset to phy reset > > Ansuel Smith (7): > PCIe: qcom: add missing ipq806x clocks in PCIe driver > devicetree: bindings: pci: add missing clks to qcom,pcie > PCIe: qcom: Fixed pcie_phy_clk branch issue > PCIe: qcom: add missing reset for ipq806x > devicetree: bindings: pci: add ext reset to qcom,pcie > PCIe: qcom: fix init problem with missing PARF programming > devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie > > Sham Muthayyan (2): > PCIe: qcom: add ipq8064 rev2 variant and set tx term offset > PCIe: qcom: add Force GEN1 support > > .../devicetree/bindings/pci/qcom,pcie.txt | 56 +++++++- > drivers/pci/controller/dwc/pcie-qcom.c | 134 +++++++++++++++--- > 2 files changed, 167 insertions(+), 23 deletions(-) > -- regards, Stan
