Use new PCI core constant PCI_STATUS_ERROR_BITS to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- drivers/net/fddi/skfp/drvfbi.c | 4 ++-- drivers/net/fddi/skfp/h/skfbi.h | 5 ----- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/fddi/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c index 9c8aa3a95..cc9ac5724 100644 --- a/drivers/net/fddi/skfp/drvfbi.c +++ b/drivers/net/fddi/skfp/drvfbi.c @@ -20,7 +20,7 @@ #include "h/supern_2.h" #include "h/skfbiinc.h" #include <linux/bitrev.h> -#include <linux/pci_regs.h> +#include <linux/pci.h> #ifndef lint static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ; @@ -112,7 +112,7 @@ static void card_start(struct s_smc *smc) */ outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */ word = inpw(PCI_C(PCI_STATUS)) ; - outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ; + outpw(PCI_C(PCI_STATUS), word | PCI_STATUS_ERROR_BITS); outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */ /* diff --git a/drivers/net/fddi/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h index 36e20a514..ccee00b71 100644 --- a/drivers/net/fddi/skfp/h/skfbi.h +++ b/drivers/net/fddi/skfp/h/skfbi.h @@ -33,11 +33,6 @@ */ #define I2C_ADDR_VPD 0xA0 /* I2C address for the VPD EEPROM */ - -#define PCI_ERRBITS (PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY) - - - /* * Control Register File: * Bank 0 -- 2.25.1
