Use new helper pci_status_get_and_clear_errors() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
drivers/net/ethernet/realtek/r8169_main.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 7c9892a16..4495a3cf9 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4357,13 +4357,15 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct pci_dev *pdev = tp->pci_dev;
- u16 pci_status, pci_cmd;
+ int pci_status_errs;
+ u16 pci_cmd;
pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
- pci_read_config_word(pdev, PCI_STATUS, &pci_status);
- netif_err(tp, intr, dev, "PCI error (cmd = 0x%04x, status = 0x%04x)\n",
- pci_cmd, pci_status);
+ pci_status_errs = pci_status_get_and_clear_errors(pdev);
+
+ netif_err(tp, intr, dev, "PCI error (cmd = 0x%04x, status_errs = 0x%04x)\n",
+ pci_cmd, pci_status_errs);
/*
* The recovery sequence below admits a very elaborated explanation:
@@ -4380,11 +4382,6 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
- pci_write_config_word(pdev, PCI_STATUS,
- pci_status & (PCI_STATUS_DETECTED_PARITY | PCI_STATUS_PARITY |
- PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT |
- PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT));
-
rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_PENDING);
}
--
2.25.1
