On 2/19/20 4:39 AM, Nicolas Saenz Julienne wrote: > On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be > loaded directly from an EEPROM or, if not present, by the SoC's > VideCore. The function informs VideCore that VL805 was just reset, or > requests for a probe defer. > > Based on Tim Gover's downstream implementation. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> > --- [snip] > diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h > index cc9cdbc66403..a37c3a461d2a 100644 > --- a/include/soc/bcm2835/raspberrypi-firmware.h > +++ b/include/soc/bcm2835/raspberrypi-firmware.h > @@ -8,6 +8,7 @@ > > #include <linux/types.h> > #include <linux/of_device.h> > +#include <linux/pci.h> I would move this inclusion where we need it, which is in drivers/firmware/raspberrypi.c and only provide a forward declaration here (avoids needless rebuilds). With that: Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> -- Florian
