Re: [PATCH] PCI: Add MCFG quirks for Tegra194 host controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 23, 2020 at 10:49:41AM +0000, Lorenzo Pieralisi wrote:
> On Tue, Jan 21, 2020 at 02:44:35PM +0100, Thierry Reding wrote:
> > On Mon, Jan 20, 2020 at 03:18:49PM +0000, Lorenzo Pieralisi wrote:
> > > On Mon, Jan 20, 2020 at 12:10:42PM +0100, Thierry Reding wrote:
> > > 
> > > [...]
> > > 
> > > > > > Currently the BSP has the kernel booting through Device Tree mechanism
> > > > > > and there is a plan to support UEFI based boot as well in the future software
> > > > > > releases for which we need this quirky way of handling ECAM.
> > > > > > Tegra194 is going to be the only and last chip with this issue and next chip
> > > > > > in line in Tegra SoC series will be fully compliant with ECAM.
> > > > > 
> > > > > ACPI on ARM64 works on a standard subset of systems, defined by the
> > > > > ARM SBSA:
> > > > > 
> > > > > http://infocenter.arm.com/help/topic/com.arm.doc.den0029c/Server_Base_System_Architecture_v6_0_ARM_DEN_0029C_SBSA_6_0.pdf
> > > > 
> > > > I don't understand what you're saying here. Are you saying that you want
> > > > to prevent vendors from upstreaming code that they need to support their
> > > > ACPI based platforms? I understand that the lack of support for proper
> > > > ECAM means that a platform will not be SBSA compatible, but I wasn't
> > > > aware that lack of SBSA compatibility meant that a platform would be
> > > > prohibited from implementing ACPI support in an upstream kernel.
> > > 
> > > ACPI on ARM64 requires a set of HW components described in the SBSA.
> > > 
> > > If those HW requirements are not fulfilled you can't bootstrap an ARM64
> > > system with ACPI - it is as simple as that.
> > 
> > That's an odd statement. We do in fact have an ARM64 system that doesn't
> > fulfill the ECAM requirement and yet it successfully boots with ACPI.
> 
> I know very well (but that's not a reason to break the PCIe
> specification).
> 
> Still, the mistake you are making is thinking that ACPI compliancy
> stops at the MCFG quirk. Adding another quirk to the MCFG list will make
> PCI enumerates but there is more to that, eg MSI/IOMMU and that's
> just an example.
> 
> There are platforms in that MCFG list that eg can't do MSI which
> basically means they are useless - you look at it as yet another hook
> into MCFG, I look at it with history in mind and from an ACPI ARM64
> maintainership perspective.
> 
> So first thing to do is to post full support for this host controller
> inclusive of MSI/INTx (which AFAICS is another piece of HW that is
> not SBSA compliant since DWC uses a funnel to trigger MSIs) and
> IOMMU, then we will see how to proceed.
> 
> Look at this (and again, that's just an example but AFAICS it applies to
> this host bridge as well):
> 
> https://lore.kernel.org/linux-pci/VE1PR04MB67029FB127DBF4A725CB9698904E0@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

So it turns out we indeed have the same issue with MSIs since Tegra194
uses the same DesignWare controller that others do (looks like at least
HiSilicon and Annapurna Labs are in the same boat). That said, most
drivers fallback to legacy interrupts and that works fine. Agreed that
it isn't ideal, but it's about as good as it's going to get on this
hardware.

> > >                                             It is not even appropriate
> > > to discuss this on a Linux mailing list anymore since it is HW
> > > requirements and it has been public information since ACPI on ARM64 was
> > > first enabled.
> > 
> > Erm... we're discussing Linux patches. Why would it be inappropriate to
> > discuss them on a Linux mailing list?
> 
> I am not discussing Linux patches at all - I am telling you that the
> DWC host controller is not a) PCIe spec compliant b) SBSA compliant
> and there is nothing to review from a Linux kernel code perspective.
> 
> This is just another quirk to enumerate with ACPI a non-compliant
> system, if Bjorn is willing to take it go for it.

Yeah, I'd like to hear Bjorn's opinion on this. I understand that this
is far from an ideal situation and I'd much prefer that this chip was
compliant. But for historical reasons it isn't. This chip was designed
before SBSA became the quasi standard. Tegra194 also isn't a server
chip to begin with, so SBSA compliance would likely not have been the
main objective.

> > > > > These patches will have to be carried out of tree, the MCFG quirk
> > > > > mechanism (merged as Bjorn said more than three years ago) was supposed
> > > > > to be a temporary plaster to bootstrap server platforms with teething
> > > > > issues, the aim is to remove it eventually not to add more code to it
> > > > > indefinitely.
> > > > 
> > > > Now, I fully agree that quirks are suboptimal and we'd all prefer if we
> > > > didn't have to deal with them. Unfortunately the reality is that
> > > > mistakes happen and hardware doesn't always work the way we want it to.
> > > > There's plenty of other quirk mechanisms in the kernel, and frankly this
> > > > one isn't really that bad in comparison.
> > > 
> > > Because you don't have to maintain it ;) - I think I said what I had to
> > > say about the MCFG mechanism in the past - it has been three years
> > > and counting - it is time to remove it rather that adding to it.
> > 
> > What makes you think you can simply remove this without breaking support
> > for all of the devices that currently rely on the quirks?
> 
> Don't you think I know ? I said "eventually" for a reason, read what
> I write.

I read what you wrote. My point is that even "eventually" things are
going to break if you just rip out the quirks.

> > > > > So I am afraid but this quirk (and any other coming our way) will not be
> > > > > merged in an upstream kernel anymore - for any queries please put Nvidia
> > > > > in touch.
> > > > 
> > > > Again, I don't understand what you're trying to achieve here. You seem
> > > > to be saying that we categorically can't support this hardware because
> > > > it isn't fully SBSA compatible.
> > > 
> > > I am not trying to achieve anything - I am just stating public
> > > information - let me repeat it again for interested readers: to
> > > bootstrap an ARM64 system with ACPI the platform HW design must follow
> > > the SBSA guidelines.
> > 
> > Can you clarify for me where I can find this public information? What
> > I've been able to find suggests that that SBSA-compliant systems would
> > typically run ACPI, but I can't find anything about SBSA compliance
> > being a prerequisite for booting a system with ACPI.
> 
> https://developer.arm.com/architectures/platform-design/server-systems
> 
> Read: SBSA/SBBR
> 
> /Documentation/arm64/arm-acpi.rst
> 
> > I can understand why someone might *wish* for that to always be true,
> > but it seems to be a bit far removed from reality.
> 
> It is reality and it is not a *wish*, Nvidia will comply - even if
> *eventually* we end up merging this code.

I already said that we reported these findings to the hardware team and
this is hopefully going to allow us to be SBSA compliant in future
chips. However, it's too late for Tegra194 and we can't retroactively
fix it.

> > > > Do you have any alternative suggestions on how we can support this in an
> > > > upstream kernel?
> > > 
> > > Booting with a device tree ?
> > 
> > We can already do that, but should that prevent us from making UEFI and
> > ACPI an alternative boot mechanism?
> 
> Why do you need ACPI support ? What for ?

Customers have requested it and they want to be able to use an upstream
kernel.

> > > > We realized a while ago that we cannot achieve proper ECAM on Tegra194
> > > > because of some issues with the hardware and we've provided this as
> > > > feedback to the hardware engineers. As a result, the next generation of
> > > > Tegra should no longer suffer from these issues.
> > > 
> > > We will bootstrap next generation Tegra with ACPI then, there are
> > > SBSA tests available for compliancy - again, that's a matter for
> > > Nvidia and Arm to settle, not a mailing list discussion.
> > 
> > I don't understand why you keep insisting on this. The mailing lists are
> > where kernel patches are discussed, are they not?
> 
> See above.
> 
> > > > As for Tegra194, that chip taped out two years ago and it isn't possible
> > > > to make it fully ECAM compliant other than by revising the chip, which,
> > > > frankly, isn't going to happen.
> > > > 
> > > > So I see two options here: either we find a way of dealing with this, by
> > > > either merging this quirk or finding an alternative solution, or we make
> > > > the decision that some hardware just can't be supported.
> > > > 
> > > > The former is fairly common, whereas I've never heard of the latter.
> > > 
> > > What does this mean ? Should I wreck the upstream kernel to make it boot
> > > with ACPI on *any* ARM64 platform out there then ?
> > 
> > Heh... you must have a very low opinion of the upstream kernel if you
> > think merging these 100 lines of code is going to wreck it.
> 
> I have a very high opinion of the upstream kernel and that's why
> as I said above I think in terms of overall ACPI ARM64 maintainership
> rather than a platform quirk to get ACPI PCI enumeration going.

From a maintenance point of view things aren't going to change much just
because we add these additional quirks. These are for the same IP that's
already supported by other quirks for other platforms and the code lives
entirely in the DesignWare driver, so I don't see how this negatively
impacts maintainability of the kernel.

> > And if you look at the patch, the bulk (95/109 lines) is actually in the
> > Tegra194 PCIe driver and only 14/109 lines are added to the MCFG quirks.
> > That's hardly the kind of change that's going to wreck the kernel.
> 
> See above, show us the rest of the story.

Like I said, not much we can do about MSI support without more driver-
specific code. But since we can fallback to legacy interrupts, things
end up working fine.

Again, I fully realize that this isn't ideal and I'd rather prefer we
didn't have to add this. But I'm also realistic and understand that
hardware designs aren't always perfect, no matter how much we want them
to be. The best we can do is take the lessons learned and try to make
the next chip better.

> > > My stance is clear above and the ACPI PCI programming model - inclusive
> > > of firmware - has been there since ACPI was deployed, if ACPI support
> > > is required HW must comply, either that or it is out of tree patches
> > > and I can't be blamed for that.
> > 
> > Looking at the existing quirks table, there's evidently a number of
> > people that didn't get the memo. The issue seems to be fairly common,
> > yet for some reason you're singling out Tegra194.
> 
> The issue is not very common at all. I said it before and I repeat it
> again: those MCFG quirks were merged more than three years ago to help
> bootstrap ACPI ARM64 ecosystem on early HW and ACPI for ARM64 is meant
> for server (SBSA/SBBR compliant) systems, for other platforms DT is the
> firmware of choice, ACPI on those does not work well (and *I* will have
> to work around it).

Like I said, Tegra194 is not a server chip. But it turns out that people
want to use ACPI on non-server systems as well. The website that you
linked to above:

	https://developer.arm.com/architectures/platform-design/server-systems

even says that SBSA is being extended to other segments. So, again, this
means that we either have to say, collectively, that we don't want to
support ACPI on ARM64 except on systems that are fully SBSA compliant or
we have to find a way to make things work. I'm not sure we really want
the first option and the quirk is a good compromise to get us the second
option.

> I am not singling out anybody, read the mailing lists and you will
> realize. You asked for this patch to be reviewed, I told you what
> my thoughts are and this patch implications - you want to go ahead,
> ask Bjorn to merge it but at least we do it with the broader
> consequences in mind.

You seemed to be categorically rejecting this patch only because the
system wasn't fully SBSA compliant. Given that other, non-SBSA compliant
devices are currently supported, it certainly seemed like you were
singling out.

Anyway, like you said, it's ultimately up to Bjorn to take this or not,
so it's not productive to go back and forth on this between the two of
us.

Perhaps a more productive way to go forward would be to look at what you
had in mind in terms of a deprecation plan for the MCFG quirks. One idea
that came up as we were discussing this internally was to move the quirk
code into the DesignWare driver. That is, instead of having this code
live in the ACPI code and referencing the DesignWare code, it'd be the
DesignWare driver itself that would initialize PCI. This would have the
added benefit that MSIs could be used, since the DesignWare driver does
have the means of decoding which MSI occurred. The same code that is
used to do this when booting from DT could be reused when booting from
ACPI.

The benefits here would be that we'd move the code out of the quirks, so
we'd be effectively relying less on those quirks, which in turn would
help to deprecate them.

Now, I'm not exactly sure I understand your concerns regarding
maintainability of these quirks, so maybe that proposal isn't really
what you're looking for. Perhaps you have a better idea?

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux