On Wed, Nov 06, 2019 at 04:24:21PM -0600, Bjorn Helgaas wrote: > From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > > Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the > PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not > selected. Remove the PCIEPORTBUS guard from building pcie/. > > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > --- > drivers/pci/Makefile | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > index 28cdd8c0213a..522d2b974e91 100644 > --- a/drivers/pci/Makefile > +++ b/drivers/pci/Makefile > @@ -7,6 +7,8 @@ obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \ > pci-sysfs.o rom.o setup-res.o irq.o vpd.o \ > setup-bus.o vc.o mmap.o setup-irq.o > > +obj-$(CONFIG_PCI) += pcie/ > + > ifdef CONFIG_PCI > obj-$(CONFIG_PROC_FS) += proc.o > obj-$(CONFIG_SYSFS) += slot.o > @@ -15,7 +17,6 @@ endif > > obj-$(CONFIG_OF) += of.o > obj-$(CONFIG_PCI_QUIRKS) += quirks.o > -obj-$(CONFIG_PCIEPORTBUS) += pcie/ > obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ > obj-$(CONFIG_PCI_MSI) += msi.o > obj-$(CONFIG_PCI_ATS) += ats.o Reviewed-by: Andrew Murray <andrew.murray@xxxxxxx> > -- > 2.24.0.rc1.363.gb1bccd3e3d-goog >
