From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not selected. Remove the PCIEPORTBUS guard from building pcie/. Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- drivers/pci/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 28cdd8c0213a..522d2b974e91 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -7,6 +7,8 @@ obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \ pci-sysfs.o rom.o setup-res.o irq.o vpd.o \ setup-bus.o vc.o mmap.o setup-irq.o +obj-$(CONFIG_PCI) += pcie/ + ifdef CONFIG_PCI obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_SYSFS) += slot.o @@ -15,7 +17,6 @@ endif obj-$(CONFIG_OF) += of.o obj-$(CONFIG_PCI_QUIRKS) += quirks.o -obj-$(CONFIG_PCIEPORTBUS) += pcie/ obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ obj-$(CONFIG_PCI_MSI) += msi.o obj-$(CONFIG_PCI_ATS) += ats.o -- 2.24.0.rc1.363.gb1bccd3e3d-goog
