On Fri, Oct 18, 2019 at 07:37:29AM -0500, Bjorn Helgaas wrote: > On Fri, Oct 18, 2019 at 11:47:21AM +0300, andriy.shevchenko@xxxxxxxxxxxxxxx wrote: > > On Thu, Oct 17, 2019 at 06:09:08PM -0500, Bjorn Helgaas wrote: > > > On Tue, Oct 08, 2019 at 05:22:34PM +0000, Patel, Mayurkumar wrote: > > > > This patch provides AER config save and restore capabilities. After system > > > > resume AER config registers settings are lost. Not restoring AER root error > > > > command register bits on root port if they were set, disables generation > > > > of an AER interrupt reported by function as described in PCIe spec r4.0, > > > > sec 7.8.4.9. Moreover, AER config mask, severity and ECRC registers are > > > > also required to maintain same state prior to system suspend to maintain > > > > AER interrupts behavior. > > > > > Can you send this as plain text? The patch seems to be a > > > quoted-printable attachment, and I can't figure out how to decode it > > > in a way "patch" will understand. > > > > I understand that it changes your workflow and probably you won't like, > > though you can use patchwork (either thru web, or directly thru client(s) > > like git pw): https://patchwork.ozlabs.org/patch/1173439/ > > I had already tried that and "patch" still thought it was corrupted. > Same thing happens when downloading from lore.kernel.org. Did you try > it and it worked for you? Hmm... indeed. patch work recognizes the patch, but fails to validate it... Original mbox is broken :( https://marc.info/?l=linux-pci&m=157055537210812&w=2&q=mbox So, here is for sure the problem on the sender's side. Sorry for the noise from me. -- With Best Regards, Andy Shevchenko
