On Fri, Oct 18, 2019 at 11:47:21AM +0300, andriy.shevchenko@xxxxxxxxxxxxxxx wrote: > On Thu, Oct 17, 2019 at 06:09:08PM -0500, Bjorn Helgaas wrote: > > On Tue, Oct 08, 2019 at 05:22:34PM +0000, Patel, Mayurkumar wrote: > > > This patch provides AER config save and restore capabilities. After system > > > resume AER config registers settings are lost. Not restoring AER root error > > > command register bits on root port if they were set, disables generation > > > of an AER interrupt reported by function as described in PCIe spec r4.0, > > > sec 7.8.4.9. Moreover, AER config mask, severity and ECRC registers are > > > also required to maintain same state prior to system suspend to maintain > > > AER interrupts behavior. > > > Can you send this as plain text? The patch seems to be a > > quoted-printable attachment, and I can't figure out how to decode it > > in a way "patch" will understand. > > I understand that it changes your workflow and probably you won't like, > though you can use patchwork (either thru web, or directly thru client(s) > like git pw): https://patchwork.ozlabs.org/patch/1173439/ I had already tried that and "patch" still thought it was corrupted. Same thing happens when downloading from lore.kernel.org. Did you try it and it worked for you? 07:30:22 ~/linux (master)$ git checkout -b test master Switched to a new branch 'test' 07:30:31 ~/linux (test)$ wget -O patch https://patchwork.ozlabs.org/patch/1173439/mbox/ --2019-10-18 07:30:47-- https://patchwork.ozlabs.org/patch/1173439/mbox/ Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 203.11.71.1, 2401:3900:2:1::2 Connecting to patchwork.ozlabs.org (patchwork.ozlabs.org)|203.11.71.1|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 8919 (8.7K) [text/plain] Saving to: ‘patch’ patch 100%[===================>] 8.71K --.-KB/s in 0.001s 2019-10-18 07:30:48 (9.41 MB/s) - ‘patch’ saved [8919/8919] 07:30:48 ~/linux (test)$ git am patch Applying: PCI/AER: Save and restore AER config state error: corrupt patch at line 14 Patch failed at 0001 PCI/AER: Save and restore AER config state hint: Use 'git am --show-current-patch' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". 07:36:11 ~/linux (test)$ wget -O patch.lore https://lore.kernel.org/linux-pci/92EBB4272BF81E4089A7126EC1E7B28479AE1486@xxxxxxxxxxxxxxxxxxxxxxxxxxxx/raw --2019-10-18 07:36:16-- https://lore.kernel.org/linux-pci/92EBB4272BF81E4089A7126EC1E7B28479AE1486@xxxxxxxxxxxxxxxxxxxxxxxxxxxx/raw Resolving lore.kernel.org (lore.kernel.org)... 54.203.26.224, 52.38.63.62 Connecting to lore.kernel.org (lore.kernel.org)|54.203.26.224|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 9744 (9.5K) [text/plain] Saving to: ‘patch.lore’ patch.lore 100%[===================>] 9.52K --.-KB/s in 0s 2019-10-18 07:36:16 (46.7 MB/s) - ‘patch.lore’ saved [9744/9744] 07:36:16 ~/linux (test)$ git am patch.lore Applying: PCI/AER: Save and restore AER config state error: corrupt patch at line 14 Patch failed at 0001 PCI/AER: Save and restore AER config state hint: Use 'git am --show-current-patch' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
