On 10/18/19 11:53 AM, Lorenzo Pieralisi wrote: > On Thu, Oct 17, 2019 at 05:01:26PM +0200, Marek Vasut wrote: > > [...] > >>> Again, just handling the first N dma-ranges entries and ignoring the >>> rest is not 'configure the controller correctly'. >> >> It's the best effort thing to do. It's well possible the next generation >> of the controller will have more windows, so could accommodate the whole >> list of ranges. >> >> Thinking about this further, this patch should be OK either way, if >> there is a DT which defines more DMA ranges than the controller can >> handle, handling some is better than failing outright -- a PCI which >> works with a subset of memory is better than PCI that does not work at all. > > OK to sum it up, this patch is there to deal with u-boot adding multiple > dma-ranges to DT. Yes, this patch was posted over two months ago, about the same time this functionality was posted for inclusion in U-Boot. It made it into recent U-Boot release, but there was no feedback on the Linux patch until recently. U-Boot can be changed for the next release, assuming we agree on how it should behave. > I still do not understand the benefit given that for > DMA masks they are useless as Rob pointed out and ditto for inbound > windows programming (given that AFAICS the PCI controller filters out > any transaction that does not fall within its inbound windows by default > so adding dma-ranges has the net effect of widening the DMA'able address > space rather than limiting it). > > In short, what's the benefit of adding more dma-ranges regions to the > DT (and consequently handling them in the kernel) ? The benefit is programming the controller inbound windows correctly. But if there is a better way to do that, I am open to implement that. Are there any suggestions / examples of that ? However, I think the discussion strayed quite far away from the real goal of this patch. This patch only handles the case where there are too many dma-ranges in the DT which cannot all be programmed into the controller. Instead of failing, the patch allows the controller to work with smaller range and reports that in the log, which I think is better than outright failing. [...] -- Best regards, Marek Vasut
