On Fri, Jun 14, 2019 at 12:10:59PM +0200, Remi Pommarel wrote: > PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it > should not modify other interrupts' mask. The ISR mask polarity was also > inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit > should actually be cleared. > > Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") > Signed-off-by: Remi Pommarel <repk@xxxxxxxxxxxx> > --- > Changes since v1: > * Improve code readability > * Fix mask polarity > * PME_MASK shift was off by one > Changes since v2: > * Modify patch title > * Change Fixes tag to commit that actually introduces the bug > --- > drivers/pci/controller/pci-aardvark.c | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) Thomas, are you OK with this patch ? Thanks, Lorenzo > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c > index 134e0306ff00..f6e55c4597b1 100644 > --- a/drivers/pci/controller/pci-aardvark.c > +++ b/drivers/pci/controller/pci-aardvark.c > @@ -415,7 +415,7 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, > > case PCI_EXP_RTCTL: { > u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG); > - *value = (val & PCIE_MSG_PM_PME_MASK) ? PCI_EXP_RTCTL_PMEIE : 0; > + *value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE; > return PCI_BRIDGE_EMUL_HANDLED; > } > > @@ -451,10 +451,15 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, > advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg); > break; > > - case PCI_EXP_RTCTL: > - new = (new & PCI_EXP_RTCTL_PMEIE) << 3; > - advk_writel(pcie, new, PCIE_ISR0_MASK_REG); > + case PCI_EXP_RTCTL: { > + /* Only mask/unmask PME interrupt */ > + u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) & > + ~PCIE_MSG_PM_PME_MASK; > + if ((new & PCI_EXP_RTCTL_PMEIE) == 0) > + val |= PCIE_MSG_PM_PME_MASK; > + advk_writel(pcie, val, PCIE_ISR0_MASK_REG); > break; > + } > > case PCI_EXP_RTSTA: > new = (new & PCI_EXP_RTSTA_PME) >> 9; > -- > 2.20.1 >