On Mon, Aug 5, 2019 at 10:52 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>
> The Power Management Status Register is in config space, and reads while
> the device is in D3cold typically return ~0 data (PCI_ERROR_RESPONSE). If
> we just look at the PCI_PM_CTRL_STATE_MASK bits, that is 0x3, which looks
> like D3hot, not D3cold.
>
> Check the entire register for PCI_ERROR_RESPONSE so we can distinguish
> D3cold from D3hot.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> ---
> drivers/pci/pci.c | 6 +++---
> include/linux/pci.h | 13 +++++++++++++
> 2 files changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index af6a97d7012b..d8686e3cd5eb 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -894,7 +894,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
> udelay(PCI_PM_D2_DELAY);
>
> pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
> + dev->current_state = pci_power_state(pmcsr);
But pci_raw_set_power_state() should not even be called for devices in
D3_cold, so this at best is redundant.
> if (dev->current_state != state && printk_ratelimit())
> pci_info(dev, "Refused to change power state, currently in D%d\n",
> dev->current_state);
> @@ -942,7 +942,7 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
> u16 pmcsr;
>
> pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
> + dev->current_state = pci_power_state(pmcsr);
The if () branch above should cover the D3cold case, shouldn't it?
> } else {
> dev->current_state = state;
> }
> @@ -1677,7 +1677,7 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
> if (dev->pm_cap) {
> u16 pmcsr;
> pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
> + dev->current_state = pci_power_state(pmcsr);
So this appears to be only case in which pci_power_state(pmcsr) is
useful at all.
It might be better to use the code from it directly here IMO.
> }
>
> if (atomic_inc_return(&dev->enable_cnt) > 1)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index d64fd3788061..fdfe990e9661 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -152,6 +152,19 @@ static inline const char *pci_power_name(pci_power_t state)
> return pci_power_names[1 + (__force int) state];
> }
>
> +/*
> + * Convert a Power Management Status Register value to a pci_power_t.
> + * Note that if we read the register while the device is in D3cold, we
> + * typically get PCI_ERROR_RESPONSE, which looks like D3hot (0x3) if we
> + * only look at the PCI_PM_CTRL_STATE_MASK bits.
> + */
> +static inline pci_power_t pci_power_state(u16 pmcsr)
> +{
> + if (pmcsr == (u16) PCI_ERROR_RESPONSE)
> + return PCI_D3cold;
> + return pmcsr & PCI_PM_CTRL_STATE_MASK;
> +}
> +
> #define PCI_PM_D2_DELAY 200
> #define PCI_PM_D3_WAIT 10
> #define PCI_PM_D3COLD_WAIT 100
> --
> 2.22.0.770.g0f2c4a37fd-goog
>
