26.05.2019 7:37, Vidya Sagar пишет: > Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface > with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. > For each PCIe lane of a controller, there is a P2U unit instantiated at > hardware level. This driver provides support for the programming required > for each P2U that is going to be used for a PCIe controller. > > Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx> > --- > Changes since [v7]: > * Changed P2U driver file name from pcie-p2u-tegra194.c to phy-tegra194-p2u.c > > Changes since [v6]: > * None > > Changes since [v5]: > * Addressed review comments from Thierry > > Changes since [v4]: > * None > > Changes since [v3]: > * Rebased on top of linux-next top of the tree > > Changes since [v2]: > * Replaced spaces with tabs in Kconfig file > * Sorted header file inclusion alphabetically > > Changes since [v1]: > * Added COMPILE_TEST in Kconfig > * Removed empty phy_ops implementations > * Modified code according to DT documentation file modifications > > drivers/phy/tegra/Kconfig | 7 ++ > drivers/phy/tegra/Makefile | 1 + > drivers/phy/tegra/phy-tegra194-p2u.c | 109 +++++++++++++++++++++++++++ > 3 files changed, 117 insertions(+) > create mode 100644 drivers/phy/tegra/phy-tegra194-p2u.c > > diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig > index a3b1de953fb7..c56fc8452e03 100644 > --- a/drivers/phy/tegra/Kconfig > +++ b/drivers/phy/tegra/Kconfig > @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB > > To compile this driver as a module, choose M here: the module will > be called phy-tegra-xusb. > + > +config PHY_TEGRA194_P2U > + tristate "NVIDIA Tegra194 PIPE2UPHY PHY driver" > + depends on ARCH_TEGRA || COMPILE_TEST ARCH_TEGRA is a bit too much, ARCH_TEGRA_194_SOC should fit better here. -- Dmitry
