Re: [PATCH v5 2/3] iommu/dma: Reserve IOVA for PCIe inaccessible DMA address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/05/2019 06:23, Srinath Mannam wrote:
Hi Robin, Lorenzo,

Thanks for review and guidance.
AFAIU, conclusion of discussion is, to return error if dma-ranges list
is not sorted.

So that, Can I send a new patch with below change to return error if
dma-ranges list is not sorted?

-static void iova_reserve_pci_windows(struct pci_dev *dev,
+static int iova_reserve_pci_windows(struct pci_dev *dev,
                 struct iova_domain *iovad)
  {
         struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);
@@ -227,11 +227,15 @@ static void iova_reserve_pci_windows(struct pci_dev *dev,
         resource_list_for_each_entry(window, &bridge->dma_ranges) {
                 end = window->res->start - window->offset;
  resv_iova:
-               if (end - start) {
+               if (end > start) {
                         lo = iova_pfn(iovad, start);
                         hi = iova_pfn(iovad, end);
                         reserve_iova(iovad, lo, hi);
+               } else {
+                       dev_err(&dev->dev, "Unsorted dma_ranges list\n");
+                       return -EINVAL;
                 }
+

Please provide your inputs if any more changes required. Thank you,

You also need to handle and return this error where iova_reserve_pci_windows() is called from iova_reserve_iommu_regions().

Robin.

Regards,
Srinath.

On Thu, May 2, 2019 at 7:45 PM Robin Murphy <robin.murphy@xxxxxxx> wrote:

On 02/05/2019 14:06, Lorenzo Pieralisi wrote:
On Thu, May 02, 2019 at 12:27:02PM +0100, Robin Murphy wrote:
Hi Lorenzo,

On 02/05/2019 12:01, Lorenzo Pieralisi wrote:
On Wed, May 01, 2019 at 11:06:25PM +0530, Srinath Mannam wrote:
dma_ranges field of PCI host bridge structure has resource entries in
sorted order of address range given through dma-ranges DT property. This
list is the accessible DMA address range. So that this resource list will
be processed and reserve IOVA address to the inaccessible address holes in
the list.

This method is similar to PCI IO resources address ranges reserving in
IOMMU for each EP connected to host bridge.

Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
Based-on-patch-by: Oza Pawandeep <oza.oza@xxxxxxxxxxxx>
Reviewed-by: Oza Pawandeep <poza@xxxxxxxxxxxxxx>
Acked-by: Robin Murphy <robin.murphy@xxxxxxx>
---
    drivers/iommu/dma-iommu.c | 19 +++++++++++++++++++
    1 file changed, 19 insertions(+)

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 77aabe6..da94844 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -212,6 +212,7 @@ static void iova_reserve_pci_windows(struct pci_dev *dev,
            struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);
            struct resource_entry *window;
            unsigned long lo, hi;
+  phys_addr_t start = 0, end;
            resource_list_for_each_entry(window, &bridge->windows) {
                    if (resource_type(window->res) != IORESOURCE_MEM)
@@ -221,6 +222,24 @@ static void iova_reserve_pci_windows(struct pci_dev *dev,
                    hi = iova_pfn(iovad, window->res->end - window->offset);
                    reserve_iova(iovad, lo, hi);
            }
+
+  /* Get reserved DMA windows from host bridge */
+  resource_list_for_each_entry(window, &bridge->dma_ranges) {

If this list is not sorted it seems to me the logic in this loop is
broken and you can't rely on callers to sort it because it is not a
written requirement and it is not enforced (you know because you
wrote the code but any other developer is not supposed to guess
it).

Can't we rewrite this loop so that it does not rely on list
entries order ?

The original idea was that callers should be required to provide a sorted
list, since it keeps things nice and simple...

I understand, if it was self-contained in driver code that would be fine
but in core code with possible multiple consumers this must be
documented/enforced, somehow.

I won't merge this series unless you sort it, no pun intended.

Lorenzo

+          end = window->res->start - window->offset;

...so would you consider it sufficient to add

              if (end < start)
                      dev_err(...);

We should also revert any IOVA reservation we did prior to this
error, right ?

I think it would be enough to propagate an error code back out through
iommu_dma_init_domain(), which should then end up aborting the whole
IOMMU setup - reserve_iova() isn't really designed to be undoable, but
since this is the kind of error that should only ever be hit during
driver or DT development, as long as we continue booting such that the
developer can clearly see what's gone wrong, I don't think we need
bother spending too much effort tidying up inside the unused domain.

Anyway, I think it is best to ensure it *is* sorted.

here, plus commenting the definition of pci_host_bridge::dma_ranges
that it must be sorted in ascending order?

I don't think that commenting dma_ranges would help much, I am more
keen on making it work by construction.

[ I guess it might even make sense to factor out the parsing and list
construction from patch #3 into an of_pci core helper from the beginning, so
that there's even less chance of another driver reimplementing it
incorrectly in future. ]

This makes sense IMO and I would like to take this approach if you
don't mind.

Sure - at some point it would be nice to wire this up to
pci-host-generic for Juno as well (with a parallel version for ACPI
_DMA), so from that viewpoint, the more groundwork in place the better :)

Thanks,
Robin.


Either this or we move the whole IOVA reservation and dma-ranges
parsing into PCI IProc.

Failing that, although I do prefer the "simple by construction"
approach, I'd have no objection to just sticking a list_sort() call in
here instead, if you'd rather it be entirely bulletproof.

I think what you outline above is a sensible way forward - if we
miss the merge window so be it.

Thanks,
Lorenzo

Robin.

+resv_iova:
+          if (end - start) {
+                  lo = iova_pfn(iovad, start);
+                  hi = iova_pfn(iovad, end);
+                  reserve_iova(iovad, lo, hi);
+          }
+          start = window->res->end - window->offset + 1;
+          /* If window is last entry */
+          if (window->node.next == &bridge->dma_ranges &&
+              end != ~(dma_addr_t)0) {
+                  end = ~(dma_addr_t)0;
+                  goto resv_iova;
+          }
+  }
    }
    static int iova_reserve_iommu_regions(struct device *dev,
--
2.7.4




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux