Re: [PATCH] PCI: endpoint: functions: use memcpy_fromio()/memcpy_toio()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/02/19 2:34 PM, Wen Yang wrote:
> Use the IO memcpy() functions when copying from/to IO memory.
> These locations were found via sparse.
> 
> Signed-off-by: Wen Yang <wen.yang99@xxxxxxxxxx>
> Suggested-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> CC: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> CC: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
> CC: Niklas Cassel <niklas.cassel@xxxxxxxx>
> CC: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> CC: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx>
> CC: linux-pci@xxxxxxxxxxxxxxx
> CC: linux-kernel@xxxxxxxxxxxxxxx

Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
>  drivers/pci/endpoint/functions/pci-epf-test.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index 3e86fa3..4bbd26e 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -175,7 +175,7 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
>  		goto err_map_addr;
>  	}
>  
> -	memcpy(buf, src_addr, reg->size);
> +	memcpy_fromio(buf, src_addr, reg->size);
>  
>  	crc32 = crc32_le(~0, buf, reg->size);
>  	if (crc32 != reg->checksum)
> @@ -230,7 +230,7 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
>  	get_random_bytes(buf, reg->size);
>  	reg->checksum = crc32_le(~0, buf, reg->size);
>  
> -	memcpy(dst_addr, buf, reg->size);
> +	memcpy_toio(dst_addr, buf, reg->size);
>  
>  	/*
>  	 * wait 1ms inorder for the write to complete. Without this delay L3
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux