[PATCH v5 0/4] PCIE support for i.MX8MQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Everyone:

This series contains changes I made in order to enable support of PCIE
IP block on i.MX8MQ SoCs.

Changes since [v4]:

 - Collected Reviewed-by from Lucas

 - Replaced ((ARM || ARM64) && COMPILE_TEST) with COMPILE_TEST as per
   suggestion from Rob

Changes since [v3]:

 - Based on feedback from NXP, DIRECT_SPEED_CHANGE quirk was expanded
   to cover both i.MX7 and i.MX8MQ

 - Code setting device type in GPR12 moved to a standalone function

 - Explicit "fsl,controller-id" binding was dropped, replaced by using
   controller physical address to determine logical ID

 - Dropped Reviewed-by from Lucas for patch 4/4 due to the change
   above (haven't heard explicit "yea" for it from him)

Changes since [v2], [fixes]:

 - Incorporated [patch] introducing drvdata

 - i.MX6 PHY operation gating converted to a single patch and to use a
   dedicated flag instead of doing explicit variant check

 - Kconfig entry changed to use ARM64 && ARCH_MXC

 - Dropped FALLTHROUGH annotations

Changes since [v1]:

 - Driver changed to use single "fsl,controller-id" property to
   distinguish between two intances of PCIE IP block

 - All code pertaining to L1SS was dropped to simplify the patch

 - Documented additions to DT bindings

Feedback is welcome!

Thanks,
Andrey Smirnov

[v4] https://lore.kernel.org/linux-arm-kernel/20190104165335.13205-1-andrew.smirnov@xxxxxxxxx
[v3] https://lore.kernel.org/linux-arm-kernel/20181218040702.29231-1-andrew.smirnov@xxxxxxxxx
[patch] https://patchwork.kernel.org/patch/10712261/
[fixes] https://lore.kernel.org/linux-arm-kernel/20181216230916.22982-1-andrew.smirnov@xxxxxxxxx
[v2] https://lore.kernel.org/linux-arm-kernel/20181206073545.10967-1-andrew.smirnov@xxxxxxxxx
[v1] https://lore.kernel.org/linux-arm-kernel/20181117181225.10737-1-andrew.smirnov@xxxxxxxxx/

Andrey Smirnov (4):
  PCI: imx6: introduce drvdata
  PCI: imx6: Mark PHY functions as i.MX6 specific
  PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
  PCI: imx6: Add support for i.MX8MQ

 .../bindings/pci/fsl,imx6q-pcie.txt           |   3 +-
 drivers/pci/controller/dwc/Kconfig            |   4 +-
 drivers/pci/controller/dwc/pci-imx6.c         | 150 +++++++++++++++---
 3 files changed, 133 insertions(+), 24 deletions(-)

-- 
2.20.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux