Hi Stephen,
On 04/01/19 1:32 PM, Kishon Vijay Abraham I wrote:
> Hi Stephen,
>
> On 02/01/19 10:04 PM, Stephen Warren wrote:
>> On 12/19/18 7:37 AM, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>> On 14/12/18 10:31 PM, Stephen Warren wrote:
>>>> On 12/11/18 10:23 AM, Stephen Warren wrote:
>>>>> On 12/10/18 9:36 PM, Kishon Vijay Abraham I wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 27/11/18 4:39 AM, Stephen Warren wrote:
>>>>>>> From: Stephen Warren <swarren@xxxxxxxxxx>
>>>>>>>
>>>>>>> Some implementations of the DWC PCIe endpoint controller do not allow
>>>>>>> access to DBI registers until the attached host has started REFCLK,
>>>>>>> released PERST, and the endpoint driver has initialized clocking of the
>>>>>>> DBI registers based on that. One such system is NVIDIA's T194 SoC. The
>>>>>>> PCIe endpoint subsystem and DWC driver currently don't work on such
>>>>>>> hardware, since they assume that all endpoint configuration can happen
>>>>>>> at any arbitrary time.
>>>>>>>
>>>>>>> Enhance the DWC endpoint driver to support such systems by caching all
>>>>>>> endpoint configuration in software, and only writing the configuration
>>>>>>> to hardware once it's been initialized. This is implemented by splitting
>>>>>>> all endpoint controller ops into two functions; the first which simply
>>>>>>> records/caches the desired configuration whenever called by the
>>>>>>> associated function driver and optionally calls the second, and the
>>>>>>> second which actually programs the configuration into hardware, which
>>>>>>> may be called either by the first function, or later when it's known
>>>>>>> that the DBI registers are available.
>>>>>
>>>>>>> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
>>>>>>> b/drivers/pci/controller/dwc/pcie-designware-ep.c
>>>>>
>>>>>>> +void dw_pcie_set_regs_available(struct dw_pcie *pci)
>>>>>>> +{
>>>>>>
>>>>>> When will this function be invoked? Does the wrapper get an interrupt when
>>>>>> refclk is enabled where this function will be invoked?
>>>>>
>>>>> Yes, there's an IRQ from the HW that indicates when PEXRST is released. I
>>>>> don't recall right now if this IRQ is something that exists for all DWC
>>>>> instantiations, or is Tegra-specific.
>>>>>
>>>>>>> + struct dw_pcie_ep *ep = &(pci->ep);
>>>>>>> + int i;
>>>>>>> +
>>>>>>> + ep->hw_regs_not_available = false;
>>>>>>
>>>>>> This can race with epc_ops.
>>>>>>
>>>>>>> +
>>>>>>> + dw_pcie_ep_write_header_regs(ep);
>>>>>>> + for_each_set_bit(i, ep->ib_window_map, ep->num_ib_windows) {
>>>>>>> + dw_pcie_prog_inbound_atu(pci, i,
>>>>>>> + ep->cached_inbound_atus[i].bar,
>>>>>>> + ep->cached_inbound_atus[i].cpu_addr,
>>>>>>> + ep->cached_inbound_atus[i].as_type);
>>>>>>
>>>>>> Depending on the context in which this function is invoked, programming
>>>>>> inbound/outbound ATU can also race with EPC ops.
>>>>> >
>>>>>>> + dw_pcie_ep_set_bar_regs(ep, 0, ep->cached_inbound_atus[i].bar);
>>>>>>> + }
>>>>>>> + for_each_set_bit(i, ep->ob_window_map, ep->num_ob_windows)
>>>>>>> + dw_pcie_prog_outbound_atu(pci, i, PCIE_ATU_TYPE_MEM,
>>>>>>> + ep->cached_outbound_atus[i].addr,
>>>>>>> + ep->cached_outbound_atus[i].pci_addr,
>>>>>>> + ep->cached_outbound_atus[i].size);
>>>>>>> + dw_pcie_dbi_ro_wr_en(pci);
>>>>>>> + dw_pcie_writew_dbi(pci, PCI_MSI_FLAGS, ep->cached_msi_flags);
>>>>>>> + dw_pcie_writew_dbi(pci, PCI_MSIX_FLAGS, ep->cached_msix_flags);
>>>>>>> + dw_pcie_dbi_ro_wr_dis(pci);
>>>>>>
>>>>>> IMHO we should add a new epc ops ->epc_init() which indicates if the EPC is
>>>>>> ready to be initialized or not. Only if the epc_init indicates it's ready
>>>>>> to be
>>>>>> initialized, the endpoint function driver should go ahead with further
>>>>>> initialization. Or else it should wait for a notification from EPC to
>>>>>> indicate
>>>>>> when it's ready to be initialized.
>>>>>
>>>>> (Did you mean epf op or epc op?)
>>>>>
>>>>> I'm not sure how exactly how that would work; do you want the DWC core driver
>>>>> or the endpoint subsystem to poll that epc op to find out when the HW is
>>>>> ready to be initialized? Or do you envisage the controller driver still
>>>>> calling dw_pcie_set_regs_available() (possibly renamed), which in turn calls
>>>>> ->epc_init() calls for some reason?
>>>>>
>>>>> If you don't want to cache the endpoint configuration, perhaps you want:
>>>>>
>>>>> a) Endpoint function doesn't pro-actively call the endpoint controller
>>>>> functions to configure the endpoint.
>>>>>
>>>>> b) When endpoint HW is ready, the relevant driver calls pci_epc_ready() (or
>>>>> whatever name), which lets the core know the HW can be configured. Perhaps
>>>>> this schedules a work queue item to implement locking to avoid the races you
>>>>> mentioned.
>>>>>
>>>>> c) Endpoint core calls pci_epf_init() which calls epf op ->init().
>>>>>
>>>>> One gotcha with this approach, which the caching approach helps avoid:
>>>>>
>>>>> Once PEXRST is released, the system must respond to PCIe enumeration requests
>>>>> within 50ms. Thus, SW must very quickly respond to the IRQ indicating PEXRST
>>>>> release and program the endpoint configuration into HW. By caching the
>>>>> configuration in the DWC driver and immediately/synchronously applying it in
>>>>> the PEXRST IRQ handler, we reduce the number of steps and amount of code
>>>>> taken to program the HW, so it should get done pretty quickly. If instead we
>>>>> call back into the endpoint function driver's ->init() op, we run the risk of
>>>>> that op doing other stuff besides just calling the endpoint HW configuration
>>>>> APIs (e.g. perhaps the function driver defers memory buffer allocation or
>>>>> IOVA programming to that ->init function) which in turns makes it much less
>>>>> likely the 50ms requirement will be hit. Perhaps we can solve this by naming
>>>>> the op well and providing lots of comments, but my guess is that endpoint
>>>>> function authors won't notice that...
>>>>
>>>> Kishon,
>>>>
>>>> Do you have any further details exactly how you'd prefer this to work? Does the
>>>> approach I describe in points a/b/c above sound like what you want? Thanks.
>>>
>>> Agree with your PERST comment.
>>>
>>> What I have in mind is we add a new epc_init() ops. I feel there are more uses
>>> for it (For e.g I have an internal patch which uses epc_init to initialize DMA.
>>> Hopefully I'll post it soon).
>>> If you look at pci_epf_test, pci_epf_test_bind() is where the function actually
>>> starts to write to HW (i.e using pci_epc_*).
>>> So before the endpoint function invokes pci_epc_write_header(), it should
>>> invoke epc_init(). Only if that succeeds, it should go ahead with other
>>> initialization.
>>> If epc_init_* fails, we can have a particular error value to indicate the
>>> controller is waiting for clock from host (so that we don't return error from
>>> ->bind()). Once the controller receives the clock, it can send an atomic
>>> notification to the endpoint function driver to indicate it is ready to be
>>> initialized. (Atomic notification makes it easy to handle for multi function
>>> endpoint devices.)
>>> The endpoint function can then initialize the controller.
>>> I think except for pci_epf_test_alloc_space() all other functions are
>>> configuring the HW (in pci_epf_test_bind). pci_epf_test_alloc_space() could be
>>> moved to pci_epf_test_probe() so there are no expensive operations to be done
>>> once the controller is ready to be initialized.
>>> I have epc_init() and the atomic notification part already implemented and I'm
>>> planning to post it before next week. Once that is merged, we might have to
>>> reorder function in pci_epf_test driver and you have to return the correct
>>> error value for epc_init() if the clock is not there.
>>
>> Kishon, did you manage to post the patches that implement epc_init()? If so, a
>> link would be appreciated. Thanks.
>
> I haven't posted the patches yet. Sorry for the delay. Give me some more time
> please (till next week).
I have posted one set of cleanup for EPC features [1] by introducing
epc_get_features(). Some of the things I initially thought should be in
epc_init actually fits in epc_get_features. However I still believe for your
usecase we should introduce ->epc_init().
Thanks
Kishon
[1] -> https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1891393.html
>
> Thanks
> Kishon
>
