No functional change. Having two different files for keystone PCI driver doesn't serve any purpose. Merge pci-keystone-dw.c and pci-keystone.c into a single pci-keystone.c file and remove pci-keystone.h Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- MAINTAINERS | 2 +- drivers/pci/controller/dwc/Makefile | 2 +- drivers/pci/controller/dwc/pci-keystone-dw.c | 483 ------------------ drivers/pci/controller/dwc/pci-keystone.c | 489 ++++++++++++++++++- drivers/pci/controller/dwc/pci-keystone.h | 56 --- 5 files changed, 490 insertions(+), 542 deletions(-) delete mode 100644 drivers/pci/controller/dwc/pci-keystone-dw.c delete mode 100644 drivers/pci/controller/dwc/pci-keystone.h diff --git a/MAINTAINERS b/MAINTAINERS index 6ac000cc006d..707f3a5133d3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11189,7 +11189,7 @@ M: Murali Karicheri <m-karicheri2@xxxxxx> L: linux-pci@xxxxxxxxxxxxxxx L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers) S: Maintained -F: drivers/pci/controller/dwc/*keystone* +F: drivers/pci/controller/dwc/pci-keystone.c PCI ENDPOINT SUBSYSTEM M: Kishon Vijay Abraham I <kishon@xxxxxx> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile index 5d2ce72c7a52..fcf91eacfc63 100644 --- a/drivers/pci/controller/dwc/Makefile +++ b/drivers/pci/controller/dwc/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o -obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o +obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o diff --git a/drivers/pci/controller/dwc/pci-keystone-dw.c b/drivers/pci/controller/dwc/pci-keystone-dw.c deleted file mode 100644 index 4bd6c6e2b177..000000000000 --- a/drivers/pci/controller/dwc/pci-keystone-dw.c +++ /dev/null @@ -1,483 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DesignWare application register space functions for Keystone PCI controller - * - * Copyright (C) 2013-2014 Texas Instruments., Ltd. - * http://www.ti.com - * - * Author: Murali Karicheri <m-karicheri2@xxxxxx> - */ - -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/irqreturn.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_pci.h> -#include <linux/pci.h> -#include <linux/platform_device.h> - -#include "pcie-designware.h" -#include "pci-keystone.h" - -/* Application register defines */ -#define LTSSM_EN_VAL 1 -#define LTSSM_STATE_MASK 0x1f -#define LTSSM_STATE_L0 0x11 -#define DBI_CS2_EN_VAL 0x20 -#define OB_XLAT_EN_VAL 2 - -/* Application registers */ -#define CMD_STATUS 0x004 -#define CFG_SETUP 0x008 -#define OB_SIZE 0x030 -#define CFG_PCIM_WIN_SZ_IDX 3 -#define CFG_PCIM_WIN_CNT 32 -#define SPACE0_REMOTE_CFG_OFFSET 0x1000 -#define OB_OFFSET_INDEX(n) (0x200 + (8 * n)) -#define OB_OFFSET_HI(n) (0x204 + (8 * n)) - -/* IRQ register defines */ -#define IRQ_EOI 0x050 -#define IRQ_STATUS 0x184 -#define IRQ_ENABLE_SET 0x188 -#define IRQ_ENABLE_CLR 0x18c - -#define MSI_IRQ 0x054 -#define MSI0_IRQ_STATUS 0x104 -#define MSI0_IRQ_ENABLE_SET 0x108 -#define MSI0_IRQ_ENABLE_CLR 0x10c -#define IRQ_STATUS 0x184 -#define MSI_IRQ_OFFSET 4 - -/* Error IRQ bits */ -#define ERR_AER BIT(5) /* ECRC error */ -#define ERR_AXI BIT(4) /* AXI tag lookup fatal error */ -#define ERR_CORR BIT(3) /* Correctable error */ -#define ERR_NONFATAL BIT(2) /* Non-fatal error */ -#define ERR_FATAL BIT(1) /* Fatal error */ -#define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */ -#define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \ - ERR_NONFATAL | ERR_FATAL | ERR_SYS) -#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI) -#define ERR_IRQ_STATUS_RAW 0x1c0 -#define ERR_IRQ_STATUS 0x1c4 -#define ERR_IRQ_ENABLE_SET 0x1c8 -#define ERR_IRQ_ENABLE_CLR 0x1cc - -/* Config space registers */ -#define DEBUG0 0x728 - -#define to_keystone_pcie(x) dev_get_drvdata((x)->dev) - -static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset, - u32 *bit_pos) -{ - *reg_offset = offset % 8; - *bit_pos = offset >> 3; -} - -phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp) -{ - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - return ks_pcie->app.start + MSI_IRQ; -} - -static u32 ks_dw_app_readl(struct keystone_pcie *ks_pcie, u32 offset) -{ - return readl(ks_pcie->va_app_base + offset); -} - -static void ks_dw_app_writel(struct keystone_pcie *ks_pcie, u32 offset, u32 val) -{ - writel(val, ks_pcie->va_app_base + offset); -} - -void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset) -{ - struct dw_pcie *pci = ks_pcie->pci; - struct pcie_port *pp = &pci->pp; - struct device *dev = pci->dev; - u32 pending, vector; - int src, virq; - - pending = ks_dw_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4)); - - /* - * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit - * shows 1, 9, 17, 25 and so forth - */ - for (src = 0; src < 4; src++) { - if (BIT(src) & pending) { - vector = offset + (src << 3); - virq = irq_linear_revmap(pp->irq_domain, vector); - dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n", - src, vector, virq); - generic_handle_irq(virq); - } - } -} - -void ks_dw_pcie_msi_irq_ack(int irq, struct pcie_port *pp) -{ - u32 reg_offset, bit_pos; - struct keystone_pcie *ks_pcie; - struct dw_pcie *pci; - - pci = to_dw_pcie_from_pp(pp); - ks_pcie = to_keystone_pcie(pci); - update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); - - ks_dw_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4), - BIT(bit_pos)); - ks_dw_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET); -} - -void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq) -{ - u32 reg_offset, bit_pos; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); - ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4), - BIT(bit_pos)); -} - -void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq) -{ - u32 reg_offset, bit_pos; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); - ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4), - BIT(bit_pos)); -} - -int ks_dw_pcie_msi_host_init(struct pcie_port *pp) -{ - return dw_pcie_allocate_domains(pp); -} - -void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie) -{ - int i; - - for (i = 0; i < PCI_NUM_INTX; i++) - ks_dw_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1); -} - -void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset) -{ - struct dw_pcie *pci = ks_pcie->pci; - struct device *dev = pci->dev; - u32 pending; - int virq; - - pending = ks_dw_app_readl(ks_pcie, IRQ_STATUS + (offset << 4)); - - if (BIT(0) & pending) { - virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset); - dev_dbg(dev, ": irq: irq_offset %d, virq %d\n", offset, virq); - generic_handle_irq(virq); - } - - /* EOI the INTx interrupt */ - ks_dw_app_writel(ks_pcie, IRQ_EOI, offset); -} - -void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie) -{ - ks_dw_app_writel(ks_pcie, ERR_IRQ_ENABLE_SET, ERR_IRQ_ALL); -} - -irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie) -{ - u32 status; - - status = ks_dw_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL; - if (!status) - return IRQ_NONE; - - if (status & ERR_FATAL_IRQ) - dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n", - status); - - /* Ack the IRQ; status bits are RW1C */ - ks_dw_app_writel(ks_pcie, ERR_IRQ_STATUS, status); - return IRQ_HANDLED; -} - -static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d) -{ -} - -static void ks_dw_pcie_mask_legacy_irq(struct irq_data *d) -{ -} - -static void ks_dw_pcie_unmask_legacy_irq(struct irq_data *d) -{ -} - -static struct irq_chip ks_dw_pcie_legacy_irq_chip = { - .name = "Keystone-PCI-Legacy-IRQ", - .irq_ack = ks_dw_pcie_ack_legacy_irq, - .irq_mask = ks_dw_pcie_mask_legacy_irq, - .irq_unmask = ks_dw_pcie_unmask_legacy_irq, -}; - -static int ks_dw_pcie_init_legacy_irq_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hw_irq) -{ - irq_set_chip_and_handler(irq, &ks_dw_pcie_legacy_irq_chip, - handle_level_irq); - irq_set_chip_data(irq, d->host_data); - - return 0; -} - -static const struct irq_domain_ops ks_dw_pcie_legacy_irq_domain_ops = { - .map = ks_dw_pcie_init_legacy_irq_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -/** - * ks_dw_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask - * registers - * - * Since modification of dbi_cs2 involves different clock domain, read the - * status back to ensure the transition is complete. - */ -static void ks_dw_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie) -{ - u32 val; - - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - ks_dw_app_writel(ks_pcie, CMD_STATUS, DBI_CS2_EN_VAL | val); - - do { - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - } while (!(val & DBI_CS2_EN_VAL)); -} - -/** - * ks_dw_pcie_clear_dbi_mode() - Disable DBI mode - * - * Since modification of dbi_cs2 involves different clock domain, read the - * status back to ensure the transition is complete. - */ -static void ks_dw_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) -{ - u32 val; - - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - ks_dw_app_writel(ks_pcie, CMD_STATUS, ~DBI_CS2_EN_VAL & val); - - do { - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - } while (val & DBI_CS2_EN_VAL); -} - -void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) -{ - struct dw_pcie *pci = ks_pcie->pci; - struct pcie_port *pp = &pci->pp; - u32 start = pp->mem->start, end = pp->mem->end; - int i, tr_size; - u32 val; - - /* Disable BARs for inbound access */ - ks_dw_pcie_set_dbi_mode(ks_pcie); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0); - ks_dw_pcie_clear_dbi_mode(ks_pcie); - - /* Set outbound translation size per window division */ - ks_dw_app_writel(ks_pcie, OB_SIZE, CFG_PCIM_WIN_SZ_IDX & 0x7); - - tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M; - - /* Using Direct 1:1 mapping of RC <-> PCI memory space */ - for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) { - ks_dw_app_writel(ks_pcie, OB_OFFSET_INDEX(i), start | 1); - ks_dw_app_writel(ks_pcie, OB_OFFSET_HI(i), 0); - start += tr_size; - } - - /* Enable OB translation */ - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - ks_dw_app_writel(ks_pcie, CMD_STATUS, OB_XLAT_EN_VAL | val); -} - -/** - * ks_pcie_cfg_setup() - Set up configuration space address for a device - * - * @ks_pcie: ptr to keystone_pcie structure - * @bus: Bus number the device is residing on - * @devfn: device, function number info - * - * Forms and returns the address of configuration space mapped in PCIESS - * address space 0. Also configures CFG_SETUP for remote configuration space - * access. - * - * The address space has two regions to access configuration - local and remote. - * We access local region for bus 0 (as RC is attached on bus 0) and remote - * region for others with TYPE 1 access when bus > 1. As for device on bus = 1, - * we will do TYPE 0 access as it will be on our secondary bus (logical). - * CFG_SETUP is needed only for remote configuration access. - */ -static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus, - unsigned int devfn) -{ - u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn); - struct dw_pcie *pci = ks_pcie->pci; - struct pcie_port *pp = &pci->pp; - u32 regval; - - if (bus == 0) - return pci->dbi_base; - - regval = (bus << 16) | (device << 8) | function; - - /* - * Since Bus#1 will be a virtual bus, we need to have TYPE0 - * access only. - * TYPE 1 - */ - if (bus != 1) - regval |= BIT(24); - - ks_dw_app_writel(ks_pcie, CFG_SETUP, regval); - return pp->va_cfg0_base; -} - -int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 *val) -{ - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - u8 bus_num = bus->number; - void __iomem *addr; - - addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn); - - return dw_pcie_read(addr + where, size, val); -} - -int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 val) -{ - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - u8 bus_num = bus->number; - void __iomem *addr; - - addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn); - - return dw_pcie_write(addr + where, size, val); -} - -/** - * ks_dw_pcie_v3_65_scan_bus() - keystone scan_bus post initialization - * - * This sets BAR0 to enable inbound access for MSI_IRQ register - */ -void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp) -{ - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - /* Configure and set up BAR0 */ - ks_dw_pcie_set_dbi_mode(ks_pcie); - - /* Enable BAR0 */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); - - ks_dw_pcie_clear_dbi_mode(ks_pcie); - - /* - * For BAR0, just setting bus address for inbound writes (MSI) should - * be sufficient. Use physical address to avoid any conflicts. - */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); -} - -/** - * ks_dw_pcie_link_up() - Check if link up - */ -int ks_dw_pcie_link_up(struct dw_pcie *pci) -{ - u32 val; - - val = dw_pcie_readl_dbi(pci, DEBUG0); - return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0; -} - -void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie) -{ - u32 val; - - /* Disable Link training */ - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - val &= ~LTSSM_EN_VAL; - ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val); - - /* Initiate Link Training */ - val = ks_dw_app_readl(ks_pcie, CMD_STATUS); - ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val); -} - -/** - * ks_dw_pcie_host_init() - initialize host for v3_65 dw hardware - * - * Ioremap the register resources, initialize legacy irq domain - * and call dw_pcie_v3_65_host_init() API to initialize the Keystone - * PCI host controller. - */ -int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie) -{ - struct dw_pcie *pci = ks_pcie->pci; - struct pcie_port *pp = &pci->pp; - struct device *dev = pci->dev; - struct platform_device *pdev = to_platform_device(dev); - struct resource *res; - - /* Index 0 is the config reg. space address */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - pci->dbi_base = devm_pci_remap_cfg_resource(dev, res); - if (IS_ERR(pci->dbi_base)) - return PTR_ERR(pci->dbi_base); - - /* - * We set these same and is used in pcie rd/wr_other_conf - * functions - */ - pp->va_cfg0_base = pci->dbi_base + SPACE0_REMOTE_CFG_OFFSET; - pp->va_cfg1_base = pp->va_cfg0_base; - - /* Index 1 is the application reg. space address */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - ks_pcie->va_app_base = devm_ioremap_resource(dev, res); - if (IS_ERR(ks_pcie->va_app_base)) - return PTR_ERR(ks_pcie->va_app_base); - - ks_pcie->app = *res; - - /* Create legacy IRQ domain */ - ks_pcie->legacy_irq_domain = - irq_domain_add_linear(ks_pcie->legacy_intc_np, - PCI_NUM_INTX, - &ks_dw_pcie_legacy_irq_domain_ops, - NULL); - if (!ks_pcie->legacy_irq_domain) { - dev_err(dev, "Failed to add irq domain for legacy irqs\n"); - return -EINVAL; - } - - return dw_pcie_host_init(pp); -} diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index f87ade2de711..337464d15775 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -25,13 +25,62 @@ #include <linux/signal.h> #include "pcie-designware.h" -#include "pci-keystone.h" #define DRIVER_NAME "keystone-pcie" /* DEV_STAT_CTRL */ #define PCIE_CAP_BASE 0x70 +/* Application register defines */ +#define LTSSM_EN_VAL BIT(0) +#define LTSSM_STATE_MASK 0x1f +#define LTSSM_STATE_L0 0x11 +#define DBI_CS2_EN_VAL 0x20 +#define OB_XLAT_EN_VAL 2 + +/* Application registers */ +#define CMD_STATUS 0x004 +#define CFG_SETUP 0x008 +#define OB_SIZE 0x030 +#define CFG_PCIM_WIN_SZ_IDX 3 +#define CFG_PCIM_WIN_CNT 32 +#define SPACE0_REMOTE_CFG_OFFSET 0x1000 +#define OB_OFFSET_INDEX(n) (0x200 + (8 * (n))) +#define OB_OFFSET_HI(n) (0x204 + (8 * (n))) + +/* IRQ register defines */ +#define IRQ_EOI 0x050 +#define IRQ_STATUS 0x184 +#define IRQ_ENABLE_SET 0x188 +#define IRQ_ENABLE_CLR 0x18c + +#define MSI_IRQ 0x054 +#define MSI0_IRQ_STATUS 0x104 +#define MSI0_IRQ_ENABLE_SET 0x108 +#define MSI0_IRQ_ENABLE_CLR 0x10c +#define IRQ_STATUS 0x184 +#define MSI_IRQ_OFFSET 4 + +/* Error IRQ bits */ +#define ERR_AER BIT(5) /* ECRC error */ +#define ERR_AXI BIT(4) /* AXI tag lookup fatal error */ +#define ERR_CORR BIT(3) /* Correctable error */ +#define ERR_NONFATAL BIT(2) /* Non-fatal error */ +#define ERR_FATAL BIT(1) /* Fatal error */ +#define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */ +#define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \ + ERR_NONFATAL | ERR_FATAL | ERR_SYS) +#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI) +#define ERR_IRQ_STATUS_RAW 0x1c0 +#define ERR_IRQ_STATUS 0x1c4 +#define ERR_IRQ_ENABLE_SET 0x1c8 +#define ERR_IRQ_ENABLE_CLR 0x1cc + +/* Config space registers */ +#define DEBUG0 0x728 + +#define MAX_MSI_HOST_IRQS 8 + /* PCIE controller device IDs */ #define PCIE_RC_K2HK 0xb008 #define PCIE_RC_K2E 0xb009 @@ -40,6 +89,444 @@ #define to_keystone_pcie(x) dev_get_drvdata((x)->dev) +struct keystone_pcie { + struct dw_pcie *pci; + struct clk *clk; + /* PCI Device ID */ + u32 device_id; + int num_legacy_host_irqs; + int legacy_host_irqs[PCI_NUM_INTX]; + struct device_node *legacy_intc_np; + + int num_msi_host_irqs; + int msi_host_irqs[MAX_MSI_HOST_IRQS]; + struct device_node *msi_intc_np; + struct irq_domain *legacy_irq_domain; + struct device_node *np; + + int error_irq; + + /* Application register space */ + void __iomem *va_app_base; /* DT 1st resource */ + struct resource app; +}; + +static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset, + u32 *bit_pos) +{ + *reg_offset = offset % 8; + *bit_pos = offset >> 3; +} + +static phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + return ks_pcie->app.start + MSI_IRQ; +} + +static u32 ks_dw_app_readl(struct keystone_pcie *ks_pcie, u32 offset) +{ + return readl(ks_pcie->va_app_base + offset); +} + +static void ks_dw_app_writel(struct keystone_pcie *ks_pcie, u32 offset, u32 val) +{ + writel(val, ks_pcie->va_app_base + offset); +} + +static void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset) +{ + struct dw_pcie *pci = ks_pcie->pci; + struct pcie_port *pp = &pci->pp; + struct device *dev = pci->dev; + u32 pending, vector; + int src, virq; + + pending = ks_dw_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4)); + + /* + * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit + * shows 1, 9, 17, 25 and so forth + */ + for (src = 0; src < 4; src++) { + if (BIT(src) & pending) { + vector = offset + (src << 3); + virq = irq_linear_revmap(pp->irq_domain, vector); + dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n", + src, vector, virq); + generic_handle_irq(virq); + } + } +} + +static void ks_dw_pcie_msi_irq_ack(int irq, struct pcie_port *pp) +{ + u32 reg_offset, bit_pos; + struct keystone_pcie *ks_pcie; + struct dw_pcie *pci; + + pci = to_dw_pcie_from_pp(pp); + ks_pcie = to_keystone_pcie(pci); + update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); + + ks_dw_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4), + BIT(bit_pos)); + ks_dw_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET); +} + +static void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq) +{ + u32 reg_offset, bit_pos; + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); + ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4), + BIT(bit_pos)); +} + +static void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq) +{ + u32 reg_offset, bit_pos; + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); + ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4), + BIT(bit_pos)); +} + +static int ks_dw_pcie_msi_host_init(struct pcie_port *pp) +{ + return dw_pcie_allocate_domains(pp); +} + +static void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie) +{ + int i; + + for (i = 0; i < PCI_NUM_INTX; i++) + ks_dw_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1); +} + +static void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, + int offset) +{ + struct dw_pcie *pci = ks_pcie->pci; + struct device *dev = pci->dev; + u32 pending; + int virq; + + pending = ks_dw_app_readl(ks_pcie, IRQ_STATUS + (offset << 4)); + + if (BIT(0) & pending) { + virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset); + dev_dbg(dev, ": irq: irq_offset %d, virq %d\n", offset, virq); + generic_handle_irq(virq); + } + + /* EOI the INTx interrupt */ + ks_dw_app_writel(ks_pcie, IRQ_EOI, offset); +} + +static void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie) +{ + ks_dw_app_writel(ks_pcie, ERR_IRQ_ENABLE_SET, ERR_IRQ_ALL); +} + +static irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie) +{ + u32 status; + + status = ks_dw_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL; + if (!status) + return IRQ_NONE; + + if (status & ERR_FATAL_IRQ) + dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n", + status); + + /* Ack the IRQ; status bits are RW1C */ + ks_dw_app_writel(ks_pcie, ERR_IRQ_STATUS, status); + return IRQ_HANDLED; +} + +static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d) +{ +} + +static void ks_dw_pcie_mask_legacy_irq(struct irq_data *d) +{ +} + +static void ks_dw_pcie_unmask_legacy_irq(struct irq_data *d) +{ +} + +static struct irq_chip ks_dw_pcie_legacy_irq_chip = { + .name = "Keystone-PCI-Legacy-IRQ", + .irq_ack = ks_dw_pcie_ack_legacy_irq, + .irq_mask = ks_dw_pcie_mask_legacy_irq, + .irq_unmask = ks_dw_pcie_unmask_legacy_irq, +}; + +static int ks_dw_pcie_init_legacy_irq_map(struct irq_domain *d, + unsigned int irq, + irq_hw_number_t hw_irq) +{ + irq_set_chip_and_handler(irq, &ks_dw_pcie_legacy_irq_chip, + handle_level_irq); + irq_set_chip_data(irq, d->host_data); + + return 0; +} + +static const struct irq_domain_ops ks_dw_pcie_legacy_irq_domain_ops = { + .map = ks_dw_pcie_init_legacy_irq_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +/** + * ks_dw_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask + * registers + * + * Since modification of dbi_cs2 involves different clock domain, read the + * status back to ensure the transition is complete. + */ +static void ks_dw_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie) +{ + u32 val; + + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + ks_dw_app_writel(ks_pcie, CMD_STATUS, DBI_CS2_EN_VAL | val); + + do { + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + } while (!(val & DBI_CS2_EN_VAL)); +} + +/** + * ks_dw_pcie_clear_dbi_mode() - Disable DBI mode + * + * Since modification of dbi_cs2 involves different clock domain, read the + * status back to ensure the transition is complete. + */ +static void ks_dw_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) +{ + u32 val; + + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + ks_dw_app_writel(ks_pcie, CMD_STATUS, ~DBI_CS2_EN_VAL & val); + + do { + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + } while (val & DBI_CS2_EN_VAL); +} + +static void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) +{ + struct dw_pcie *pci = ks_pcie->pci; + struct pcie_port *pp = &pci->pp; + u32 start = pp->mem->start, end = pp->mem->end; + int i, tr_size; + u32 val; + + /* Disable BARs for inbound access */ + ks_dw_pcie_set_dbi_mode(ks_pcie); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0); + ks_dw_pcie_clear_dbi_mode(ks_pcie); + + /* Set outbound translation size per window division */ + ks_dw_app_writel(ks_pcie, OB_SIZE, CFG_PCIM_WIN_SZ_IDX & 0x7); + + tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M; + + /* Using Direct 1:1 mapping of RC <-> PCI memory space */ + for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) { + ks_dw_app_writel(ks_pcie, OB_OFFSET_INDEX(i), start | 1); + ks_dw_app_writel(ks_pcie, OB_OFFSET_HI(i), 0); + start += tr_size; + } + + /* Enable OB translation */ + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + ks_dw_app_writel(ks_pcie, CMD_STATUS, OB_XLAT_EN_VAL | val); +} + +/** + * ks_pcie_cfg_setup() - Set up configuration space address for a device + * + * @ks_pcie: ptr to keystone_pcie structure + * @bus: Bus number the device is residing on + * @devfn: device, function number info + * + * Forms and returns the address of configuration space mapped in PCIESS + * address space 0. Also configures CFG_SETUP for remote configuration space + * access. + * + * The address space has two regions to access configuration - local and remote. + * We access local region for bus 0 (as RC is attached on bus 0) and remote + * region for others with TYPE 1 access when bus > 1. As for device on bus = 1, + * we will do TYPE 0 access as it will be on our secondary bus (logical). + * CFG_SETUP is needed only for remote configuration access. + */ +static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus, + unsigned int devfn) +{ + u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn); + struct dw_pcie *pci = ks_pcie->pci; + struct pcie_port *pp = &pci->pp; + u32 regval; + + if (bus == 0) + return pci->dbi_base; + + regval = (bus << 16) | (device << 8) | function; + + /* + * Since Bus#1 will be a virtual bus, we need to have TYPE0 + * access only. + * TYPE 1 + */ + if (bus != 1) + regval |= BIT(24); + + ks_dw_app_writel(ks_pcie, CFG_SETUP, regval); + return pp->va_cfg0_base; +} + +static int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, + unsigned int devfn, int where, int size, + u32 *val) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + u8 bus_num = bus->number; + void __iomem *addr; + + addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn); + + return dw_pcie_read(addr + where, size, val); +} + +static int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, + unsigned int devfn, int where, int size, + u32 val) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + u8 bus_num = bus->number; + void __iomem *addr; + + addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn); + + return dw_pcie_write(addr + where, size, val); +} + +/** + * ks_dw_pcie_v3_65_scan_bus() - keystone scan_bus post initialization + * + * This sets BAR0 to enable inbound access for MSI_IRQ register + */ +static void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + /* Configure and set up BAR0 */ + ks_dw_pcie_set_dbi_mode(ks_pcie); + + /* Enable BAR0 */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); + + ks_dw_pcie_clear_dbi_mode(ks_pcie); + + /* + * For BAR0, just setting bus address for inbound writes (MSI) should + * be sufficient. Use physical address to avoid any conflicts. + */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); +} + +/** + * ks_dw_pcie_link_up() - Check if link up + */ +static int ks_dw_pcie_link_up(struct dw_pcie *pci) +{ + u32 val; + + val = dw_pcie_readl_dbi(pci, DEBUG0); + return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0; +} + +static void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie) +{ + u32 val; + + /* Disable Link training */ + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + val &= ~LTSSM_EN_VAL; + ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val); + + /* Initiate Link Training */ + val = ks_dw_app_readl(ks_pcie, CMD_STATUS); + ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val); +} + +/** + * ks_dw_pcie_host_init() - initialize host for v3_65 dw hardware + * + * Ioremap the register resources, initialize legacy irq domain + * and call dw_pcie_v3_65_host_init() API to initialize the Keystone + * PCI host controller. + */ +static int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie) +{ + struct dw_pcie *pci = ks_pcie->pci; + struct pcie_port *pp = &pci->pp; + struct device *dev = pci->dev; + struct platform_device *pdev = to_platform_device(dev); + struct resource *res; + + /* Index 0 is the config reg. space address */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pci->dbi_base = devm_pci_remap_cfg_resource(dev, res); + if (IS_ERR(pci->dbi_base)) + return PTR_ERR(pci->dbi_base); + + /* + * We set these same and is used in pcie rd/wr_other_conf + * functions + */ + pp->va_cfg0_base = pci->dbi_base + SPACE0_REMOTE_CFG_OFFSET; + pp->va_cfg1_base = pp->va_cfg0_base; + + /* Index 1 is the application reg. space address */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + ks_pcie->va_app_base = devm_ioremap_resource(dev, res); + if (IS_ERR(ks_pcie->va_app_base)) + return PTR_ERR(ks_pcie->va_app_base); + + ks_pcie->app = *res; + + /* Create legacy IRQ domain */ + ks_pcie->legacy_irq_domain = + irq_domain_add_linear(ks_pcie->legacy_intc_np, + PCI_NUM_INTX, + &ks_dw_pcie_legacy_irq_domain_ops, + NULL); + if (!ks_pcie->legacy_irq_domain) { + dev_err(dev, "Failed to add irq domain for legacy irqs\n"); + return -EINVAL; + } + + return dw_pcie_host_init(pp); +} + static void quirk_limit_mrrs(struct pci_dev *dev) { struct pci_bus *bus = dev->bus; diff --git a/drivers/pci/controller/dwc/pci-keystone.h b/drivers/pci/controller/dwc/pci-keystone.h deleted file mode 100644 index 4eacc263f157..000000000000 --- a/drivers/pci/controller/dwc/pci-keystone.h +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Keystone PCI Controller's common includes - * - * Copyright (C) 2013-2014 Texas Instruments., Ltd. - * http://www.ti.com - * - * Author: Murali Karicheri <m-karicheri2@xxxxxx> - */ - -#define MAX_MSI_HOST_IRQS 8 - -struct keystone_pcie { - struct dw_pcie *pci; - struct clk *clk; - /* PCI Device ID */ - u32 device_id; - int num_legacy_host_irqs; - int legacy_host_irqs[PCI_NUM_INTX]; - struct device_node *legacy_intc_np; - - int num_msi_host_irqs; - int msi_host_irqs[MAX_MSI_HOST_IRQS]; - struct device_node *msi_intc_np; - struct irq_domain *legacy_irq_domain; - struct device_node *np; - - int error_irq; - - /* Application register space */ - void __iomem *va_app_base; /* DT 1st resource */ - struct resource app; -}; - -/* Keystone DW specific MSI controller APIs/definitions */ -void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset); -phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp); - -/* Keystone specific PCI controller APIs */ -void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie); -void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset); -void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie); -irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie); -int ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie); -int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 val); -int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 *val); -void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie); -void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie); -void ks_dw_pcie_msi_irq_ack(int i, struct pcie_port *pp); -void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq); -void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq); -void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp); -int ks_dw_pcie_msi_host_init(struct pcie_port *pp); -int ks_dw_pcie_link_up(struct dw_pcie *pci); -- 2.17.1
