commit 025dd3daeda77f61a280da87ae701 ("PCI: keystone: Add error IRQ
handler") added dev_err() message only for ERR_AXI and ERR_FATAL. Add
debug error message for ERR_SYS, ERR_NONFATAL, ERR_CORR and ERR_AER here.
While at that avoid using ERR_IRQ_STATUS_RAW and use ERR_IRQ_STATUS
instead.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/pci/controller/dwc/pci-keystone.c | 33 +++++++++++++++--------
1 file changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 67646a64c895..35ad3686d4a1 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -78,8 +78,6 @@
#define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */
#define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \
ERR_NONFATAL | ERR_FATAL | ERR_SYS)
-#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI)
-#define ERR_IRQ_STATUS_RAW 0x1c0
#define ERR_IRQ_STATUS 0x1c4
#define ERR_IRQ_ENABLE_SET 0x1c8
#define ERR_IRQ_ENABLE_CLR 0x1cc
@@ -251,18 +249,31 @@ static void ks_pcie_enable_error_irq(struct keystone_pcie *ks_pcie)
static irqreturn_t ks_pcie_handle_error_irq(struct keystone_pcie *ks_pcie)
{
- u32 status;
+ u32 reg;
+ struct device *dev = ks_pcie->pci->dev;
+
+ reg = ks_pcie_app_readl(ks_pcie, ERR_IRQ_STATUS);
+
+ if (reg & ERR_SYS)
+ dev_err(dev, "System Error\n");
+
+ if (reg & ERR_FATAL)
+ dev_err(dev, "Fatal Error\n");
+
+ if (reg & ERR_NONFATAL)
+ dev_dbg(dev, "Non Fatal Error\n");
+
+ if (reg & ERR_CORR)
+ dev_dbg(dev, "Correctable Error\n");
+
+ if (reg & ERR_AXI)
+ dev_err(dev, "AXI tag lookup fatal Error\n");
- status = ks_pcie_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL;
- if (!status)
- return IRQ_NONE;
+ if (reg & ERR_AER)
+ dev_err(dev, "ECRC Error\n");
- if (status & ERR_FATAL_IRQ)
- dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n",
- status);
+ ks_pcie_app_writel(ks_pcie, ERR_IRQ_STATUS, reg);
- /* Ack the IRQ; status bits are RW1C */
- ks_pcie_app_writel(ks_pcie, ERR_IRQ_STATUS, status);
return IRQ_HANDLED;
}
--
2.17.1
