Re: [virtio-dev] Re: [PATCH v3] virtio_pci: support enabling VFs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 05, 2018 at 09:36:53AM +0800, Tiwei Bie wrote:
> On Mon, Jun 04, 2018 at 07:32:25PM +0300, Michael S. Tsirkin wrote:
> > On Fri, Jun 01, 2018 at 12:02:39PM +0800, Tiwei Bie wrote:
> > > There is a new feature bit allocated in virtio spec to
> > > support SR-IOV (Single Root I/O Virtualization):
> > > 
> > > https://github.com/oasis-tcs/virtio-spec/issues/11
> > > 
> > > This patch enables the support for this feature bit in
> > > virtio driver.
> > > 
> > > Signed-off-by: Tiwei Bie <tiwei.bie@xxxxxxxxx>
> > > ---
> > 
> > OK but what about freeze/restore functions?

So for restore, don't you need to restore the
sriov capability?


> > I also wonder about kexec - virtio.c currently does:
> > 
> >         /* We always start by resetting the device, in case a previous
> >          * driver messed it up.  This also tests that code path a little. */
> >         dev->config->reset(dev);
> > 
> > Do we need to do something like this for sriov?
> 
> I think VFs are managed by PCI core. Once they are
> allocated, virtio driver doesn't have to care too
> much about how to manage them. The proposal for the
> spec is just to provide a feature bit based virtio
> way for virtio drivers to know whether a virtio
> device is SR-IOV capable (and virtio drivers can
> support configuring SR-IOV based on the feature
> bit negotiation result).
> 
> > 
> > I also wonder whether PCI core should disable sriov for us.
> > 
> > 
> > I wish there was a patch emulating this without vDPA for QEMU,
> > would make it easy to test your patches. Do you happen
> > to have something like this?
> 
> Sorry, currently I don't have anything like this..
> 
> Best regards,
> Tiwei Bie
> 
> > 
> > Thanks,
> > 
> > 
> > > v3:
> > > - Drop the acks;
> > > 
> > > v2:
> > > - Disable VFs when unbinding the driver (Alex, MST);
> > > - Don't use pci_sriov_configure_simple (Alex);
> > > 
> > >  drivers/virtio/virtio_pci_common.c | 30 ++++++++++++++++++++++++++++++
> > >  drivers/virtio/virtio_pci_modern.c | 14 ++++++++++++++
> > >  include/uapi/linux/virtio_config.h |  7 ++++++-
> > >  3 files changed, 50 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > > index 48d4d1cf1cb6..1d4467b2dc31 100644
> > > --- a/drivers/virtio/virtio_pci_common.c
> > > +++ b/drivers/virtio/virtio_pci_common.c
> > > @@ -577,6 +577,8 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
> > >  	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
> > >  	struct device *dev = get_device(&vp_dev->vdev.dev);
> > >  
> > > +	pci_disable_sriov(pci_dev);
> > > +
> > >  	unregister_virtio_device(&vp_dev->vdev);
> > >  
> > >  	if (vp_dev->ioaddr)
> > > @@ -588,6 +590,33 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
> > >  	put_device(dev);
> > >  }
> > >  
> > > +static int virtio_pci_sriov_configure(struct pci_dev *pci_dev, int num_vfs)
> > > +{
> > > +	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
> > > +	struct virtio_device *vdev = &vp_dev->vdev;
> > > +	int ret;
> > > +
> > > +	if (!(vdev->config->get_status(vdev) & VIRTIO_CONFIG_S_DRIVER_OK))
> > > +		return -EBUSY;
> > > +
> > > +	if (!__virtio_test_bit(vdev, VIRTIO_F_SR_IOV))
> > > +		return -EINVAL;
> > > +
> > > +	if (pci_vfs_assigned(pci_dev))
> > > +		return -EPERM;
> > > +
> > > +	if (num_vfs == 0) {
> > > +		pci_disable_sriov(pci_dev);
> > > +		return 0;
> > > +	}
> > > +
> > > +	ret = pci_enable_sriov(pci_dev, num_vfs);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	return num_vfs;
> > > +}
> > > +
> > >  static struct pci_driver virtio_pci_driver = {
> > >  	.name		= "virtio-pci",
> > >  	.id_table	= virtio_pci_id_table,
> > > @@ -596,6 +625,7 @@ static struct pci_driver virtio_pci_driver = {
> > >  #ifdef CONFIG_PM_SLEEP
> > >  	.driver.pm	= &virtio_pci_pm_ops,
> > >  #endif
> > > +	.sriov_configure = virtio_pci_sriov_configure,
> > >  };
> > >  
> > >  module_pci_driver(virtio_pci_driver);
> > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > index 2555d80f6eec..07571daccfec 100644
> > > --- a/drivers/virtio/virtio_pci_modern.c
> > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > @@ -153,14 +153,28 @@ static u64 vp_get_features(struct virtio_device *vdev)
> > >  	return features;
> > >  }
> > >  
> > > +static void vp_transport_features(struct virtio_device *vdev, u64 features)
> > > +{
> > > +	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > +	struct pci_dev *pci_dev = vp_dev->pci_dev;
> > > +
> > > +	if ((features & BIT_ULL(VIRTIO_F_SR_IOV)) &&
> > > +			pci_find_ext_capability(pci_dev, PCI_EXT_CAP_ID_SRIOV))
> > > +		__virtio_set_bit(vdev, VIRTIO_F_SR_IOV);
> > > +}
> > > +
> > >  /* virtio config->finalize_features() implementation */
> > >  static int vp_finalize_features(struct virtio_device *vdev)
> > >  {
> > >  	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > +	u64 features = vdev->features;
> > >  
> > >  	/* Give virtio_ring a chance to accept features. */
> > >  	vring_transport_features(vdev);
> > >  
> > > +	/* Give virtio_pci a chance to accept features. */
> > > +	vp_transport_features(vdev, features);
> > > +
> > >  	if (!__virtio_test_bit(vdev, VIRTIO_F_VERSION_1)) {
> > >  		dev_err(&vdev->dev, "virtio: device uses modern interface "
> > >  			"but does not have VIRTIO_F_VERSION_1\n");
> > > diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
> > > index 308e2096291f..b7c1f4e7d59e 100644
> > > --- a/include/uapi/linux/virtio_config.h
> > > +++ b/include/uapi/linux/virtio_config.h
> > > @@ -49,7 +49,7 @@
> > >   * transport being used (eg. virtio_ring), the rest are per-device feature
> > >   * bits. */
> > >  #define VIRTIO_TRANSPORT_F_START	28
> > > -#define VIRTIO_TRANSPORT_F_END		34
> > > +#define VIRTIO_TRANSPORT_F_END		38
> > >  
> > >  #ifndef VIRTIO_CONFIG_NO_LEGACY
> > >  /* Do we get callbacks when the ring is completely used, even if we've
> > > @@ -71,4 +71,9 @@
> > >   * this is for compatibility with legacy systems.
> > >   */
> > >  #define VIRTIO_F_IOMMU_PLATFORM		33
> > > +
> > > +/*
> > > + * Does the device support Single Root I/O Virtualization?
> > > + */
> > > +#define VIRTIO_F_SR_IOV			37
> > >  #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
> > > -- 
> > > 2.17.0
> > 
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: virtio-dev-unsubscribe@xxxxxxxxxxxxxxxxxxxx
> > For additional commands, e-mail: virtio-dev-help@xxxxxxxxxxxxxxxxxxxx
> > 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux