On Mon, Jun 04, 2018 at 07:32:25PM +0300, Michael S. Tsirkin wrote: > On Fri, Jun 01, 2018 at 12:02:39PM +0800, Tiwei Bie wrote: > > There is a new feature bit allocated in virtio spec to > > support SR-IOV (Single Root I/O Virtualization): > > > > https://github.com/oasis-tcs/virtio-spec/issues/11 > > > > This patch enables the support for this feature bit in > > virtio driver. > > > > Signed-off-by: Tiwei Bie <tiwei.bie@xxxxxxxxx> > > --- > > OK but what about freeze/restore functions? > > I also wonder about kexec - virtio.c currently does: > > /* We always start by resetting the device, in case a previous > * driver messed it up. This also tests that code path a little. */ > dev->config->reset(dev); > > Do we need to do something like this for sriov? I think VFs are managed by PCI core. Once they are allocated, virtio driver doesn't have to care too much about how to manage them. The proposal for the spec is just to provide a feature bit based virtio way for virtio drivers to know whether a virtio device is SR-IOV capable (and virtio drivers can support configuring SR-IOV based on the feature bit negotiation result). > > I also wonder whether PCI core should disable sriov for us. > > > I wish there was a patch emulating this without vDPA for QEMU, > would make it easy to test your patches. Do you happen > to have something like this? Sorry, currently I don't have anything like this.. Best regards, Tiwei Bie > > Thanks, > > > > v3: > > - Drop the acks; > > > > v2: > > - Disable VFs when unbinding the driver (Alex, MST); > > - Don't use pci_sriov_configure_simple (Alex); > > > > drivers/virtio/virtio_pci_common.c | 30 ++++++++++++++++++++++++++++++ > > drivers/virtio/virtio_pci_modern.c | 14 ++++++++++++++ > > include/uapi/linux/virtio_config.h | 7 ++++++- > > 3 files changed, 50 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c > > index 48d4d1cf1cb6..1d4467b2dc31 100644 > > --- a/drivers/virtio/virtio_pci_common.c > > +++ b/drivers/virtio/virtio_pci_common.c > > @@ -577,6 +577,8 @@ static void virtio_pci_remove(struct pci_dev *pci_dev) > > struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); > > struct device *dev = get_device(&vp_dev->vdev.dev); > > > > + pci_disable_sriov(pci_dev); > > + > > unregister_virtio_device(&vp_dev->vdev); > > > > if (vp_dev->ioaddr) > > @@ -588,6 +590,33 @@ static void virtio_pci_remove(struct pci_dev *pci_dev) > > put_device(dev); > > } > > > > +static int virtio_pci_sriov_configure(struct pci_dev *pci_dev, int num_vfs) > > +{ > > + struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); > > + struct virtio_device *vdev = &vp_dev->vdev; > > + int ret; > > + > > + if (!(vdev->config->get_status(vdev) & VIRTIO_CONFIG_S_DRIVER_OK)) > > + return -EBUSY; > > + > > + if (!__virtio_test_bit(vdev, VIRTIO_F_SR_IOV)) > > + return -EINVAL; > > + > > + if (pci_vfs_assigned(pci_dev)) > > + return -EPERM; > > + > > + if (num_vfs == 0) { > > + pci_disable_sriov(pci_dev); > > + return 0; > > + } > > + > > + ret = pci_enable_sriov(pci_dev, num_vfs); > > + if (ret < 0) > > + return ret; > > + > > + return num_vfs; > > +} > > + > > static struct pci_driver virtio_pci_driver = { > > .name = "virtio-pci", > > .id_table = virtio_pci_id_table, > > @@ -596,6 +625,7 @@ static struct pci_driver virtio_pci_driver = { > > #ifdef CONFIG_PM_SLEEP > > .driver.pm = &virtio_pci_pm_ops, > > #endif > > + .sriov_configure = virtio_pci_sriov_configure, > > }; > > > > module_pci_driver(virtio_pci_driver); > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c > > index 2555d80f6eec..07571daccfec 100644 > > --- a/drivers/virtio/virtio_pci_modern.c > > +++ b/drivers/virtio/virtio_pci_modern.c > > @@ -153,14 +153,28 @@ static u64 vp_get_features(struct virtio_device *vdev) > > return features; > > } > > > > +static void vp_transport_features(struct virtio_device *vdev, u64 features) > > +{ > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev); > > + struct pci_dev *pci_dev = vp_dev->pci_dev; > > + > > + if ((features & BIT_ULL(VIRTIO_F_SR_IOV)) && > > + pci_find_ext_capability(pci_dev, PCI_EXT_CAP_ID_SRIOV)) > > + __virtio_set_bit(vdev, VIRTIO_F_SR_IOV); > > +} > > + > > /* virtio config->finalize_features() implementation */ > > static int vp_finalize_features(struct virtio_device *vdev) > > { > > struct virtio_pci_device *vp_dev = to_vp_device(vdev); > > + u64 features = vdev->features; > > > > /* Give virtio_ring a chance to accept features. */ > > vring_transport_features(vdev); > > > > + /* Give virtio_pci a chance to accept features. */ > > + vp_transport_features(vdev, features); > > + > > if (!__virtio_test_bit(vdev, VIRTIO_F_VERSION_1)) { > > dev_err(&vdev->dev, "virtio: device uses modern interface " > > "but does not have VIRTIO_F_VERSION_1\n"); > > diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h > > index 308e2096291f..b7c1f4e7d59e 100644 > > --- a/include/uapi/linux/virtio_config.h > > +++ b/include/uapi/linux/virtio_config.h > > @@ -49,7 +49,7 @@ > > * transport being used (eg. virtio_ring), the rest are per-device feature > > * bits. */ > > #define VIRTIO_TRANSPORT_F_START 28 > > -#define VIRTIO_TRANSPORT_F_END 34 > > +#define VIRTIO_TRANSPORT_F_END 38 > > > > #ifndef VIRTIO_CONFIG_NO_LEGACY > > /* Do we get callbacks when the ring is completely used, even if we've > > @@ -71,4 +71,9 @@ > > * this is for compatibility with legacy systems. > > */ > > #define VIRTIO_F_IOMMU_PLATFORM 33 > > + > > +/* > > + * Does the device support Single Root I/O Virtualization? > > + */ > > +#define VIRTIO_F_SR_IOV 37 > > #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */ > > -- > > 2.17.0 > > --------------------------------------------------------------------- > To unsubscribe, e-mail: virtio-dev-unsubscribe@xxxxxxxxxxxxxxxxxxxx > For additional commands, e-mail: virtio-dev-help@xxxxxxxxxxxxxxxxxxxx >
