On Thu, May 10, 2018 at 12:34:53AM -0400, Subrahmanya Lingappa wrote:
> This patch adds the DT bindings for Mobiveil PCIe Host Bridge
> IP driver and updates the vendor prefixes file.
>
> Signed-off-by: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> .../devicetree/bindings/pci/mobiveil-pcie.txt | 73 ++++++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> MAINTAINERS | 7 +++
> 3 files changed, 81 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
I have applied the series to pci/mobiveil for v4.18.
Thanks,
Lorenzo
> diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
> new file mode 100644
> index 0000000..65038aa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
> @@ -0,0 +1,73 @@
> +* Mobiveil AXI PCIe Root Port Bridge DT description
> +
> +Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
> +has up to 8 outbound and inbound windows for the address translation.
> +
> +Required properties:
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> + interrupt source. The value must be 1.
> +- compatible: Should contain "mbvl,gpex40-pcie"
> +- reg: Should contain PCIe registers location and length
> + "config_axi_slave": PCIe controller registers
> + "csr_axi_slave" : Bridge config registers
> + "gpio_slave" : GPIO registers to control slot power
> + "apb_csr" : MSI registers
> +
> +- device_type: must be "pci"
> +- apio-wins : number of requested apio outbound windows
> + default 2 outbound windows are configured -
> + 1. Config window
> + 2. Memory window
> +- ppio-wins : number of requested ppio inbound windows
> + default 1 inbound memory window is configured.
> +- bus-range: PCI bus numbers covered
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: specifies the number of cells needed to encode an
> + interrupt source. The value must be 1.
> +- interrupt-parent : phandle to the interrupt controller that
> + it is attached to, it should be set to gic to point to
> + ARM's Generic Interrupt Controller node in system DT.
> +- interrupts: The interrupt line of the PCIe controller
> + last cell of this field is set to 4 to
> + denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
> +- interrupt-map-mask,
> + interrupt-map: standard PCI properties to define the mapping of the
> + PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is not
> + supported by hardware)
> + Please refer to the standard PCI bus binding document for a more
> + detailed explanation
> +
> +
> +Example:
> +++++++++
> + pcie0: pcie@a0000000 {
> + #address-cells = <3>;
> + #size-cells = <2>;
> + compatible = "mbvl,gpex40-pcie";
> + reg = <0xa0000000 0x00001000>,
> + <0xb0000000 0x00010000>,
> + <0xff000000 0x00200000>,
> + <0xb0010000 0x00001000>;
> + reg-names = "config_axi_slave",
> + "csr_axi_slave",
> + "gpio_slave",
> + "apb_csr";
> + device_type = "pci";
> + apio-wins = <2>;
> + ppio-wins = <1>;
> + bus-range = <0x00000000 0x000000ff>;
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + #interrupt-cells = <1>;
> + interrupts = < 0 89 4 >;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 0 &pci_express 0>,
> + <0 0 0 1 &pci_express 1>,
> + <0 0 0 2 &pci_express 2>,
> + <0 0 0 3 &pci_express 3>;
> + ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
> +
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 0994bdd..8263cc7 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -197,6 +197,7 @@ lwn Liebherr-Werk Nenzing GmbH
> macnica Macnica Americas
> marvell Marvell Technology Group Ltd.
> maxim Maxim Integrated Products
> +mbvl Mobiveil Inc.
> mcube mCube
> meas Measurement Specialties
> mediatek MediaTek Inc.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 44512c3..b295080 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9162,6 +9162,13 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/
> S: Maintained
> F: drivers/media/dvb-frontends/mn88473*
>
> +PCI DRIVER FOR MOBIVEIL PCIE IP
> +M: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>
> +L: linux-pci@xxxxxxxxxxxxxxx
> +S: Supported
> +F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
> +F: drivers/pci/host/pcie-mobiveil.c
> +
> MODULE SUPPORT
> M: Jessica Yu <jeyu@xxxxxxxxxx>
> M: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
> --
> 1.8.3.1
>
