On Fri, 2018-04-27 at 12:58 -0500, Bjorn Helgaas wrote:
> On Mon, Apr 16, 2018 at 07:28:23PM -0500, Frederick Lawler wrote:
> > The IB/hfi1 driver uses custom macros to configure the target link speed. Some
> > macros were previously replaced, but not fully. This patch series addresses the
> > configuration inconsistencies by adding PCI_EXP_LNKCTL2_TLS* macros to PCI,
> > and then use them in the following IB/hfi1 patch.
> >
> > V3:
> > * PCI: Add PCI_EXP_LNKCTL2_TLS_* macros
> > * Drop patch to use extract_speed() in do_pcie_gen3_transition()
> > V2:
> > * s/LINK/LNK
> >
> > Frederick Lawler (2):
> > PCI: Add PCI_EXP_LNKCTL2_TLS* macros
> > IB/hfi1: Replace custom hfi1 macros with PCIe macros
> >
> > drivers/infiniband/hw/hfi1/pcie.c | 24 ++++++++----------------
> > include/uapi/linux/pci_regs.h | 5 +++++
> > 2 files changed, 13 insertions(+), 16 deletions(-)
>
> I applied these, with Michael's reviewed-by on the second, to
> pci/misc for v4.18, thanks!
>
> Ideally we could pull some of this link speed management code into the
> PCI core someday, but I think these patches are useful as-is.
>
> Oh, I did s/PCI_EXP_LNKCTL2_TLS_2_5GB/PCI_EXP_LNKCTL2_TLS_2_5GT/
> because the link speeds are actually defined in terms of GT/s, not
> GB/s.
Thanks :-)
--
Doug Ledford <dledford@xxxxxxxxxx>
GPG KeyID: B826A3330E572FDD
Key fingerprint = AE6B 1BDA 122B 23B4 265B 1274 B826 A333 0E57 2FDDAttachment:
signature.asc
Description: This is a digitally signed message part
