From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Use pcie_print_link_status() to report PCIe link speed and possible
limitations instead of implementing this in the driver itself.
Note that pcie_get_minimum_link() can return misleading information because
it finds the slowest link and the narrowest link without considering the
total bandwidth of the link. If the path contains a 16 GT/s x1 link and a
2.5 GT/s x16 link, pcie_get_minimum_link() returns 2.5 GT/s x1, which
corresponds to 250 MB/s of bandwidth, not the actual available bandwidth of
about 2000 MB/s for a 16 GT/s x1 link.
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 23 ++++++----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 74fc9af4aadb..c92601f1b0f3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13922,8 +13922,6 @@ static int bnx2x_init_one(struct pci_dev *pdev,
{
struct net_device *dev = NULL;
struct bnx2x *bp;
- enum pcie_link_width pcie_width;
- enum pci_bus_speed pcie_speed;
int rc, max_non_def_sbs;
int rx_count, tx_count, rss_count, doorbell_size;
int max_cos_est;
@@ -14091,21 +14089,12 @@ static int bnx2x_init_one(struct pci_dev *pdev,
dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
rtnl_unlock();
}
- if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) ||
- pcie_speed == PCI_SPEED_UNKNOWN ||
- pcie_width == PCIE_LNK_WIDTH_UNKNOWN)
- BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n");
- else
- BNX2X_DEV_INFO(
- "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
- board_info[ent->driver_data].name,
- (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
- pcie_width,
- pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" :
- pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" :
- pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" :
- "Unknown",
- dev->base_addr, bp->pdev->irq, dev->dev_addr);
+ BNX2X_DEV_INFO(
+ "%s (%c%d) PCI-E found at mem %lx, IRQ %d, node addr %pM\n",
+ board_info[ent->driver_data].name,
+ (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+ dev->base_addr, bp->pdev->irq, dev->dev_addr);
+ pcie_print_link_status(bp->pdev);
bnx2x_register_phc(bp);
