Re: [PATCH v2] PCI / PM: Always check PME wakeup capability for runtime wakeup support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:

On Monday, March 26, 2018 7:54:35 AM CEST Kai Heng Feng wrote:
Hi Bjorn, Rafael,

On Mar 19, 2018, at 10:09 PM, Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
wrote:

USB controller ASM1042 stops working after commit de3ef1eb1cd0 ("PM /
core: Drop run_wake flag from struct dev_pm_info").

The device in question is not power managed by platform firmware,
furthermore, it only supports PME# from D3cold:
Capabilities: [78] Power Management version 3
       Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
       Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Before commit de3ef1eb1cd0, the device never gets runtime suspended.
After that commit, the device gets runtime suspended, so it does not
respond to any PME#.

usb_hcd_pci_probe() mandatorily calls device_wakeup_enable(), hence
device_can_wakeup() in pci_dev_run_wake() always returns true.

So pci_dev_run_wake() needs to check PME wakeup capability as its first
condition.

Fixes: de3ef1eb1cd0 ("PM / core: Drop run_wake flag from struct
dev_pm_info")
Cc: stable@xxxxxxxxxxxxxxx # 4.13+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>


Is there any improvement I can address?
Or do you have any concern about this patch?

Kai-Heng

---
v2: Explicitly check dev->pme_support.

 drivers/pci/pci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f6a4dd10d9b0..52821a21fc07 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2125,16 +2125,16 @@ bool pci_dev_run_wake(struct pci_dev *dev)
 {
 	struct pci_bus *bus = dev->bus;

-	if (device_can_wakeup(&dev->dev))
-		return true;
-
 	if (!dev->pme_support)
 		return false;

 	/* PME-capable in principle, but not from the target power state */
-	if (!pci_pme_capable(dev, pci_target_state(dev, false)))
+	if (!pci_pme_capable(dev, pci_target_state(dev, true)))

So why do you change 'false' to 'true' here?

At least that change should be mentioned in the changelog too.

I'll update the reason in the change log.

Thanks.


return false;

+	if (device_can_wakeup(&dev->dev))
+		return true;
+
 	while (bus->parent) {
 		struct pci_dev *bridge = bus->self;





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux