On Wednesday, March 7, 2018 7:14:02 AM CET Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>
> Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the
> platform firmware or the OS, so the host bridge driver may have to request
> permission from the platform before using them. On ACPI systems, this is
> done by negotiate_os_control() in acpi_pci_root_add().
>
> The PCIe port driver later uses pcie_port_platform_notify() and
> pcie_port_acpi_setup() to figure out whether it can use these features.
> But all we need is a single bit for each service, so these interfaces are
> needlessly complicated.
>
> Simplify this by adding bits in the struct pci_host_bridge to show when the
> OS has permission to use each feature:
>
> + unsigned int use_aer:1; /* OS may use PCIe AER */
> + unsigned int use_hotplug:1; /* OS may use PCIe hotplug */
> + unsigned int use_pme:1; /* OS may use PCIe PME */
>
> These are set when we create a host bridge, and the host bridge driver can
> clear the bits corresponding to any feature the platform doesn't want us to
> use.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> ---
> drivers/acpi/pci_root.c | 13 ++++++++++--
> drivers/pci/pcie/Makefile | 1 -
> drivers/pci/pcie/portdrv.h | 11 ----------
> drivers/pci/pcie/portdrv_core.c | 42 ++++++++++++++++++++++++---------------
> drivers/pci/probe.c | 10 +++++++++
> include/linux/pci.h | 3 +++
> 6 files changed, 50 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index 6fc204a52493..dce53527cdc1 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -871,6 +871,7 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
> struct acpi_device *device = root->device;
> int node = acpi_get_node(device->handle);
> struct pci_bus *bus;
> + struct pci_host_bridge *host_bridge;
>
> info->root = root;
> info->bridge = device;
> @@ -895,9 +896,17 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
> if (!bus)
> goto out_release_info;
>
> + host_bridge = to_pci_host_bridge(bus->bridge);
> + if (!(root->osc_control_set & PCIE_PORT_SERVICE_HP))
> + host_bridge->use_hotplug = 0;
> + if (!(root->osc_control_set & OSC_PCI_EXPRESS_AER_CONTROL))
> + host_bridge->use_aer = 0;
> + if (!(root->osc_control_set & OSC_PCI_EXPRESS_PME_CONTROL))
> + host_bridge->use_pme = 0;
> +
> pci_scan_child_bus(bus);
> - pci_set_host_bridge_release(to_pci_host_bridge(bus->bridge),
> - acpi_pci_root_release_info, info);
> + pci_set_host_bridge_release(host_bridge, acpi_pci_root_release_info,
> + info);
> if (node != NUMA_NO_NODE)
> dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
> return bus;
> diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
> index e01c10c97b95..11fb633b866c 100644
> --- a/drivers/pci/pcie/Makefile
> +++ b/drivers/pci/pcie/Makefile
> @@ -7,7 +7,6 @@
> obj-$(CONFIG_PCIEASPM) += aspm.o
>
> pcieportdrv-y := portdrv_core.o portdrv_pci.o
> -pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o
>
> obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
>
> diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
> index 749d200936d9..2c19cf9ffea2 100644
> --- a/drivers/pci/pcie/portdrv.h
> +++ b/drivers/pci/pcie/portdrv.h
> @@ -66,15 +66,4 @@ static inline bool pcie_pme_no_msi(void) { return false; }
> static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
> #endif /* !CONFIG_PCIE_PME */
>
> -#ifdef CONFIG_ACPI
> -void pcie_port_acpi_setup(struct pci_dev *port, int *mask);
> -
> -static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask)
> -{
> - pcie_port_acpi_setup(port, mask);
> -}
> -#else /* !CONFIG_ACPI */
> -static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask){}
> -#endif /* !CONFIG_ACPI */
> -
> #endif /* _PORTDRV_H_ */
> diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
> index 94ce4dc50d1a..29210e9bfbd3 100644
> --- a/drivers/pci/pcie/portdrv_core.c
> +++ b/drivers/pci/pcie/portdrv_core.c
> @@ -207,19 +207,20 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
> */
> static int get_port_device_capability(struct pci_dev *dev)
> {
> + struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> + bool native;
> int services = 0;
> - int cap_mask = 0;
>
> - cap_mask = PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP;
> - if (pci_aer_available())
> - cap_mask |= PCIE_PORT_SERVICE_AER | PCIE_PORT_SERVICE_DPC;
> -
> - if (pcie_ports_auto)
> - pcie_port_platform_notify(dev, &cap_mask);
> + /*
> + * If the user specified "pcie_ports=native", use the PCIe services
> + * regardless of whether the platform has given us permission. On
> + * ACPI systems, this means we ignore _OSC.
> + */
> + native = !pcie_ports_auto;
>
> - /* Hot-Plug Capable */
> - if ((cap_mask & PCIE_PORT_SERVICE_HP) && dev->is_hotplug_bridge) {
> + if (dev->is_hotplug_bridge && (native || host->use_hotplug)) {
> services |= PCIE_PORT_SERVICE_HP;
> +
> /*
> * Disable hot-plug interrupts in case they have been enabled
> * by the BIOS and the hot-plug service driver is not loaded.
> @@ -227,20 +228,27 @@ static int get_port_device_capability(struct pci_dev *dev)
> pcie_capability_clear_word(dev, PCI_EXP_SLTCTL,
> PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
> }
> - /* AER capable */
> - if ((cap_mask & PCIE_PORT_SERVICE_AER)
> - && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) {
> +
> + if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR) &&
> + pci_aer_available() && (native || host->use_aer)) {
> services |= PCIE_PORT_SERVICE_AER;
> +
> /*
> * Disable AER on this port in case it's been enabled by the
> * BIOS (the AER service driver will enable it when necessary).
> */
> pci_disable_pcie_error_reporting(dev);
> }
> - /* Root ports are capable of generating PME too */
> - if ((cap_mask & PCIE_PORT_SERVICE_PME)
> - && pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
> +
> + /*
> + * Root ports are capable of generating PME too. Root Complex
> + * Event Collectors can also generate PMEs, but we don't handle
> + * those yet.
> + */
> + if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
> + (native || host->use_pme)) {
> services |= PCIE_PORT_SERVICE_PME;
> +
> /*
> * Disable PME interrupt on this port in case it's been enabled
> * by the BIOS (the PME service driver will enable it when
> @@ -248,7 +256,9 @@ static int get_port_device_capability(struct pci_dev *dev)
> */
> pcie_pme_interrupt_enable(dev, false);
> }
> - if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC))
> +
> + if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
> + pci_aer_available())
> services |= PCIE_PORT_SERVICE_DPC;
>
> return services;
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index ef5377438a1e..839fb0059900 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -540,6 +540,16 @@ struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
> INIT_LIST_HEAD(&bridge->windows);
> bridge->dev.release = pci_release_host_bridge_dev;
>
> + /*
> + * We assume we can manage these PCIe features. Some systems may
> + * reserve these for use by the platform itself, e.g., an ACPI BIOS
> + * may implement its own AER handling and use _OSC to prevent the
> + * OS from interfering.
> + */
> + bridge->use_aer = 1;
> + bridge->use_hotplug = 1;
> + bridge->use_pme = 1;
> +
> return bridge;
> }
> EXPORT_SYMBOL(pci_alloc_host_bridge);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 024a1beda008..40aec7a6fdd9 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -469,6 +469,9 @@ struct pci_host_bridge {
> struct msi_controller *msi;
> unsigned int ignore_reset_delay:1; /* For entire hierarchy */
> unsigned int no_ext_tags:1; /* No Extended Tags */
> + unsigned int use_aer:1; /* OS may use PCIe AER */
> + unsigned int use_hotplug:1; /* OS may use PCIe hotplug */
> + unsigned int use_pme:1; /* OS may use PCIe PME */
> /* Resource alignment requirements */
> resource_size_t (*align_resource)(struct pci_dev *dev,
> const struct resource *res,
>
>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
