Re: [PATCH] sparc: Use generic pci_mmap_resource_range()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 19, 2018 at 10:30:25AM -0500, David Miller wrote:
> From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
> Date: Mon, 19 Feb 2018 15:24:18 +0000
> 
> >> For one, the sparc specific code allows mmap'ing any address range
> >> within a PCI bus device.  The generic code does not allow that.
> > 
> > 
> > You mean any address range in a given PCI bus even if there is no
> > actual device with a BAR at the corresponding address?
> > 
> > Would I be right to assume this was only available through the legacy
> > procfs API? I think it should be possible to accommodate it, and it
> > does look like I'd missed this requirement the first time round; thanks
> > for pointing it out.
> 
> It was probably the case that only procfs could do it.
> 
> It is the mechanism by which we were able to let the X server poke
> around in VGA ISA space.  It does a bus I/O space map for the bus
> device above the VGA card.

What's the bottom line?  Do we want this for sparc?  If so, do you
want to take it, Dave M, or would you like me to?



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux