Hi Keith,
On Tue, Dec 19, 2017 at 02:06:43PM -0700, Keith Busch wrote:
> A DPC enabled device will suppress sending ERR_FATAL and ERR_NONFATAL,
> which prevents the AER handler from reporting the details of the
> error. This patch will have the DPC driver get the AER status registers
> from the downstream port that detected the uncorrectable error, and
> print out additional information.
>
> Signed-off-by: Keith Busch <keith.busch@xxxxxxxxx>
> ---
> drivers/pci/pcie/pcie-dpc.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
> index ef71a472592c..aefc4fbdcef0 100644
> --- a/drivers/pci/pcie/pcie-dpc.c
> +++ b/drivers/pci/pcie/pcie-dpc.c
> @@ -44,6 +44,7 @@ struct dpc_dev {
> int cap_pos;
> bool rp;
> u32 rp_pio_status;
> + struct aer_err_info info;
> };
>
> static const char * const rp_pio_error_string[] = {
> @@ -111,6 +112,9 @@ static void interrupt_event_handler(struct work_struct *work)
> struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
> struct pci_bus *parent = pdev->subordinate;
>
> + if (aer_get_device_error_info(pdev, &dpc->info))
> + aer_print_error(pdev, &dpc->info);
I'm confused about this. "pdev" is the DPC-enabled Port, i.e., the
Port that received an ERR_FATAL or ERR_NONFATAL Message. The Message
was generated by something below "pdev", and that's where the
interesting AER logging would have been done.
This patch suggests that the DPC port itself would have something
interesting logged in its AER capability. Is that really true? I see
in sec 6.2.10 (PCIe r4.0) that the DPC port should log the Trigger
Reason and the Error Source ID from the Message, but I don't see
anything about logging anything in its AER registers.
> pci_lock_rescan_remove();
> list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
> bus_list) {
> @@ -275,6 +279,10 @@ static irqreturn_t dpc_irq(int irq, void *context)
> /* show RP PIO error detail information */
> if (reason == 3 && ext_reason == 0)
> dpc_process_rp_pio_error(dpc);
> + if (reason == 2)
> + dpc->info.severity = AER_FATAL;
> + else
> + dpc->info.severity = AER_NONFATAL;
>
> schedule_work(&dpc->work);
> }
> --
> 2.13.6
>
