Add support for r8a7743. The Renesas RZ/G1M(R8A7743)PCIe controller is identical to the R-Car Gen2 family. No driver change is needed due to the fallback compatible value "renesas,pcie-rcar-gen2". Adding the SoC-specific compatible values here has three purposes: 1. Document which SoCs have this hardware module, 2. Allow checkpatch to validate compatible values. 3. Allow the driver to support SoC specific implementations in future as necessary. Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx> Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/pci/rcar-pci.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 76ba3a6..2c43e38 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -1,13 +1,15 @@ * Renesas R-Car PCIe interface Required properties: -compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; +compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; + "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; "renesas,pcie-r8a7793" for the R8A7793 SoC; "renesas,pcie-r8a7795" for the R8A7795 SoC; "renesas,pcie-r8a7796" for the R8A7796 SoC; - "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device. + "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or + RZ-G1 compatible device. "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the -- 1.9.1
