Às 9:23 AM de 8/3/2017, Zhiqiang Hou escreveu:
> From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
>
> The read-only DBI registers can be written over the DBI when set
> the "Write to RO Registers Using DBI" (DBI_RO_WR_EN) field of the
> MISC_CONTROL_1_OFF register.
>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> ---
> V2:
> - None
>
> drivers/pci/dwc/pcie-designware.h | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index b4d2a89..bbdf35b 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -76,6 +76,9 @@
> #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
> #define PCIE_ATU_UPPER_TARGET 0x91C
>
> +#define PCIE_MISC_CONTROL_1_OFF 0x8BC
> +#define PCIE_DBI_RO_WR_EN (0x1 << 0)
> +
> /*
> * iATU Unroll-specific register definitions
> * From 4.80 core version the address translation will be made by unroll
> @@ -279,6 +282,28 @@ static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
> return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
> }
>
> +static inline void dw_pcie_dbi_ro_wr_en(struct dw_pcie *pci)
> +{
> + u32 reg;
> + u32 val;
> +
> + reg = PCIE_MISC_CONTROL_1_OFF;
> + val = dw_pcie_readl_dbi(pci, reg);
> + val |= PCIE_DBI_RO_WR_EN;
> + dw_pcie_writel_dbi(pci, reg, val);
> +}
> +
> +static inline void dw_pcie_dbi_ro_wr_dis(struct dw_pcie *pci)
> +{
> + u32 reg;
> + u32 val;
> +
> + reg = PCIE_MISC_CONTROL_1_OFF;
> + val = dw_pcie_readl_dbi(pci, reg);
> + val &= ~PCIE_DBI_RO_WR_EN;
> + dw_pcie_writel_dbi(pci, reg, val);
> +}
> +
> #ifdef CONFIG_PCIE_DW_HOST
> irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
> void dw_pcie_msi_init(struct pcie_port *pp);
>
Acked-By: Joao Pinto <jpinto@xxxxxxxxxxxx>
