The bindings for the V3 Semiconductor PCI bridge are a tad bit outdated and predates the more formal format we have adopted for the bindings. Update them a bit so it is easier to read, and add the Integrator AP- specific compatible so we can detect that we are running on that specific platform. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- .../devicetree/bindings/pci/v3-v360epc-pci.txt | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt index 30b364e504ba..bcc5fe2a74cb 100644 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -2,14 +2,15 @@ V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) -Integrator-specific notes: - -- syscon: should contain a link to the syscon device node (since - on the Integrator, some registers in the syscon are required to - operate the V3). - -V360 EPC specific notes: - -- reg: should contain the base address of the V3 adapter. +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain the base address of the V3 host bridge. - interrupts: should contain a reference to the V3 error interrupt as routed on the system. + +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since + on the Integrator, some registers in the syscon are required to + operate the V3 host bridge. -- 2.9.4
