Am Dienstag, den 27.12.2016, 12:40 -0200 schrieb Fabio Estevam:
> From: Fabio Estevam <fabio.estevam@xxxxxxx>
>
> When a PCI card is not connected, the following messages are seen on mx6:
>
> imx6q-pcie 1ffc000.pcie: phy link never came up
> imx6q-pcie 1ffc000.pcie: Link never came up
>
> The first one comes from the pcie-designware.c core file, so remove
> the redundant one from the imx6 driver.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> ---
> drivers/pci/host/pci-imx6.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index c8cefb0..66c3b84 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -502,10 +502,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
> IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
>
> ret = imx6_pcie_wait_for_link(imx6_pcie);
> - if (ret) {
> - dev_info(dev, "Link never came up\n");
> + if (ret)
> goto err_reset_phy;
> - }
>
> if (imx6_pcie->link_gen == 2) {
> /* Allow Gen2 mode after the link is up. */
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
