From: Fabio Estevam <fabio.estevam@xxxxxxx>
When a PCI card is not connected, the following messages are seen on mx6:
imx6q-pcie 1ffc000.pcie: phy link never came up
imx6q-pcie 1ffc000.pcie: Link never came up
The first one comes from the pcie-designware.c core file, so remove
the redundant one from the imx6 driver.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
drivers/pci/host/pci-imx6.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index c8cefb0..66c3b84 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -502,10 +502,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
ret = imx6_pcie_wait_for_link(imx6_pcie);
- if (ret) {
- dev_info(dev, "Link never came up\n");
+ if (ret)
goto err_reset_phy;
- }
if (imx6_pcie->link_gen == 2) {
/* Allow Gen2 mode after the link is up. */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
