On Wed, Aug 31, 2016 at 9:50 AM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote: > The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) > where BAR 0 is supposed to be. This is erratum HSE43 in the spec update > referenced below: > > The PCIe* Base Specification indicates that Configuration Space Headers > have a base address register at offset 0x10. Due to this erratum, the > Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function > 3; Offset 0x10) is located where a base register is expected. > > Mark the PCU as having non-compliant BARs so we don't try to probe any of > them. There are no other BARs on this device. > > Rename the quirk so it's not Broadwell-specific. While it's not a big enough battle to fight it sure is irritating to see vendors make the same mistakes over and over again. Wondering if this an error on the respective vendor's BIOS team's part or is this is just being inherited over and over again from Intel's Premier BIOS team reference code? > > Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 > Reported-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx> > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > --- > arch/x86/pci/fixup.c | 20 +++++++++++++------- > 1 file changed, 13 insertions(+), 7 deletions(-) > > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index 837ea36..6d52b94 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); > > /* > - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. > + * Device [8086:2fc0] > + * Erratum HSE43 > + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > * > - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html > - * entry BDF2. > + * Devices [8086:6f60,6fa0,6fc0] > + * Erratum BDF2 > + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html > */ > -static void pci_bdwep_bar(struct pci_dev *dev) > +static void pci_invalid_bar(struct pci_dev *dev) > { > dev->non_compliant_bars = 1; > } > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); > Acked-by: Myron Stowe <myron.stowe@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
