The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) where BAR 0 is supposed to be. This is erratum HSE43 in the spec update referenced below: The PCIe* Base Specification indicates that Configuration Space Headers have a base address register at offset 0x10. Due to this erratum, the Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function 3; Offset 0x10) is located where a base register is expected. Mark the PCU as having non-compliant BARs so we don't try to probe any of them. There are no other BARs on this device. Rename the quirk so it's not Broadwell-specific. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 Reported-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- arch/x86/pci/fixup.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 837ea36..6d52b94 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); /* - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. + * Device [8086:2fc0] + * Erratum HSE43 + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html * - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html - * entry BDF2. + * Devices [8086:6f60,6fa0,6fc0] + * Erratum BDF2 + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html */ -static void pci_bdwep_bar(struct pci_dev *dev) +static void pci_invalid_bar(struct pci_dev *dev) { dev->non_compliant_bars = 1; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html