Arnd Bergmann <arnd@xxxxxxxx> writes: > Before that, we were always setting both mrrs and mps. As we don't know > who uses PCIE_BUS_PEER2PEER, maybe another option would be to add yet > another pcie_bus_config value for this particular quirk? It would be a safe approach. Or, maybe another non-pcie_bus_config thing, I don't know (so the pcie_bus_config is left for the user). > I started the DT conversion a long time ago (see the DT parsing in > arch/arm/mach-cns3xxx/core.c) but I never had any hardware to test > on, and it was at a time when we didn't even have DT support in all > the subsystems. > > I'd definitely help you get the rest of the DT support in place if > you can test it. This is now the only SMP platform and one of > the last users of GIC and l2x0 that does not use DT, so I'd love > to see that converted just so we can remove the legacy probing from > those drivers. Ok. Is there a DT skeleton file somewhere, so I can try to boot the board (without Laguna extras) in DT mode? At first, I only need CPU + RAM + console serial port. > Converting what we have in mainline should be fairly straightforward, > but there is more code in > target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c that requires > more work, in particular we need to come up with a way to handle > the laguna_net_data and laguna_info structures, which have some of > the same data that is normall in DT. I assume adding this to U-Boot should be acceptable (for Gateworks, too). They are already doing this to their i.MX6 line Ventana. > Also, the gpio driver doesn't > have a trivial conversion to DT and requires some work to define > a binding and implement that. GPIO is a bit less important ATM, since the boards can boot without it. -- Krzysztof Halasa Industrial Research Institute for Automation and Measurements PIAP Al. Jerozolimskie 202, 02-486 Warsaw, Poland -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
