Re: [PATCH v8 13/45] powerpc/powernv/ioda1: M64 support on P7IOC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/20/2016 10:22 AM, Gavin Shan wrote:
On Wed, Apr 13, 2016 at 05:47:59PM +1000, Alexey Kardashevskiy wrote:
On 02/17/2016 02:43 PM, Gavin Shan wrote:
This enables M64 window on P7IOC, which has been enabled on PHB3.
Different from PHB3 where 16 M64 BARs are supported and each of
them can be owned by one particular PE# exclusively or divided
evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
of them are divided to 8 segments. So every P7IOC PHB supports
128 M64 segments in total. P7IOC has M64DT, which helps mapping
one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
M64DT, indicating that one M64 segment can only be pinned to the
fixed PE#. In order to have same code to support M64 on P7IOC and
PHB3, we just provide 128 M64 segments on every P7IOC PHB and each
of them is pinned to the fixed PE# by bypassing the function of
M64DT. In turn, we just need different phb->init_m64() for P7IOC
and PHB3 to support M64.

The comment is not quite correct - in addition to pnv_ioda1_init_m64(), you
also need to hack pnv_ioda_pick_m64_pe().


Right, will talk about the changes to pnv_ioda_pick_m64_pe() in the
commit log of next revision.



Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
  arch/powerpc/platforms/powernv/pci-ioda.c | 86 +++++++++++++++++++++++++++++--
  arch/powerpc/platforms/powernv/pci.h      |  3 ++
  2 files changed, 86 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 1dc663a..8488238 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -246,6 +246,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
  	}
  }

+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
+{
+	struct resource *r;
+	int index;
+
+	/*
+	 * There are 16 M64 BARs, each of which has 8 segments. So
+	 * there are as many M64 segments as the maximum number of
+	 * PEs, which is 128.
+	 */
+	for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
+		unsigned long base, segsz = phb->ioda.m64_segsize;
+		int64_t rc;
+
+		base = phb->ioda.m64_base +
+		       index * PNV_IODA1_M64_SEGS * segsz;
+		rc = opal_pci_set_phb_mem_window(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index, base, 0,
+				PNV_IODA1_M64_SEGS * segsz);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld setting M64 PHB#%d-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+
+		rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index,
+				OPAL_ENABLE_M64_SPLIT);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld enabling M64 PHB#%d-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+	}
+
+	/*
+	 * Exclude the segment used by the reserved PE, which
+	 * is expected to be 0 or last supported PE#.
+	 */
+	r = &phb->hose->mem_resources[1];
+	if (phb->ioda.reserved_pe_idx == 0)
+		r->start += phb->ioda.m64_segsize;
+	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
+		r->end -= phb->ioda.m64_segsize;
+	else
+		pr_warn("  Cannot cut M64 segment for reserved PE#%d\n",
+			phb->ioda.reserved_pe_idx);
+
+	return 0;
+
+fail:
+	for ( ; index >= 0; index--)
+		opal_pci_phb_mmio_enable(phb->opal_id,
+			OPAL_M64_WINDOW_TYPE, index, OPAL_DISABLE_M64);
+
+	return -EIO;
+}
+
  static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus,
  				    unsigned long *pe_bitmap,
  				    bool all)
@@ -315,6 +373,26 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
  			pe->master = master_pe;
  			list_add_tail(&pe->list, &master_pe->slaves);
  		}
+
+		/*
+		 * P7IOC supports M64DT, which helps mapping M64 segment
+		 * to one particular PE#. However, PHB3 has fixed mapping
+		 * between M64 segment and PE#. In order to have same logic
+		 * for P7IOC and PHB3, we enforce fixed mapping between M64
+		 * segment and PE# on P7IOC.
+		 */
+		if (phb->type == PNV_PHB_IODA1) {
+			int64_t rc;
+
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+					pe->pe_number, OPAL_M64_WINDOW_TYPE,
+					pe->pe_number / PNV_IODA1_M64_SEGS,
+					pe->pe_number % PNV_IODA1_M64_SEGS);
+			if (rc != OPAL_SUCCESS)
+				pr_warn("%s: Error %lld mapping M64 for PHB#%d-PE#%d\n",
+					__func__, rc, phb->hose->global_number,
+					pe->pe_number);
+		}


Cannot this go to pnv_ioda1_init_m64()? From the commit log I understood that
this setup is supposed to be static so it can be done once. Or it is sort of
enable/disable PE? Then make is a helper and call it ioda1_pe_enable() or
something.


No, we cannot. This associates the M64 segments with the PE# and it can be
done in pnv_ioda1_init_m64() where PE# is unknown.

Ok.


I don't understand what
you meant by "sort of enable/disable PE". PE starts the jurney when PELTM
has the corresponding mapping and it doesn't depend on M64 mapping necessarily.

Ok.



  	}

  	kfree(pe_alloc);
@@ -329,8 +407,7 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
  	const u32 *r;
  	u64 pci_addr;

-	/* FIXME: Support M64 for P7IOC */
-	if (phb->type != PNV_PHB_IODA2) {
+	if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) {
  		pr_info("  Not support M64 window\n");
  		return;
  	}
@@ -364,7 +441,10 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)

  	/* Use last M64 BAR to cover M64 window */
  	phb->ioda.m64_bar_idx = 15;
-	phb->init_m64 = pnv_ioda2_init_m64;
+	if (phb->type == PNV_PHB_IODA1)
+		phb->init_m64 = pnv_ioda1_init_m64;
+	else
+		phb->init_m64 = pnv_ioda2_init_m64;
  	phb->reserve_m64_pe = pnv_ioda_reserve_m64_pe;
  	phb->pick_m64_pe = pnv_ioda_pick_m64_pe;
  }
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 866a5ea..00539ff 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -82,6 +82,9 @@ struct pnv_ioda_pe {
  	struct list_head	list;
  };

+#define PNV_IODA1_M64_NUM	16	/* Number of M64 BARs   */
+#define PNV_IODA1_M64_SEGS	8	/* Segments per M64 BAR */
+

Why here, not in the beginning of arch/powerpc/platforms/powernv/pci-ioda.c ?
It exposes symbols but nothing is using them (except pci-ioda.c) and code
browsing gets bit more inconvenient.


It would be personal taste: those macros is tied with the definition
of "struct pnv_ioda_pe" or "struct pnv_ioda_phb".


Neither of these structs uses these macros though.

On the other hand,
those macros have to be in the header file once we split pci-ioda.c
to multiple source files some day.

Why? When/if we do such a split, these macros will simply go to pci-ioda1.c and won't pollute global powernv/ioda namespace.


However, I can move them to
pci-ioda.c if you really want see them there. Let me know anyway.


Please move. Thanks.




  #define PNV_PHB_FLAG_EEH	(1 << 0)

  struct pnv_phb {



--
Alexey


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux