On 02/17/2016 02:44 PM, Gavin Shan wrote:
This drops unnecessary nested if statements in pnv_eeh_reset() to
improve the code readability. After the changes, the unused local
variable "ret" is dropped as well. No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
---
arch/powerpc/platforms/powernv/eeh-powernv.c | 67 +++++++++++++---------------
1 file changed, 31 insertions(+), 36 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 69e41ce..9226df1 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -1009,8 +1009,9 @@ static int pnv_eeh_reset_vf_pe(struct eeh_pe *pe, int option)
static int pnv_eeh_reset(struct eeh_pe *pe, int option)
{
struct pci_controller *hose = pe->phb;
+ struct pnv_phb *phb;
struct pci_bus *bus;
- int ret;
+ int64_t rc;
/*
* For PHB reset, we always have complete reset. For those PEs whose
@@ -1026,45 +1027,39 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
* reset. The side effect is that EEH core has to clear the frozen
* state explicitly after BAR restore.
*/
- if (pe->type & EEH_PE_PHB) {
- ret = pnv_eeh_phb_reset(hose, option);
- } else {
- struct pnv_phb *phb;
- s64 rc;
+ if (pe->type & EEH_PE_PHB)
+ return pnv_eeh_phb_reset(hose, option);
- /*
- * The frozen PE might be caused by PAPR error injection
- * registers, which are expected to be cleared after hitting
- * frozen PE as stated in the hardware spec. Unfortunately,
- * that's not true on P7IOC. So we have to clear it manually
- * to avoid recursive EEH errors during recovery.
- */
- phb = hose->private_data;
- if (phb->model == PNV_PHB_MODEL_P7IOC &&
- (option == EEH_RESET_HOT ||
- option == EEH_RESET_FUNDAMENTAL)) {
- rc = opal_pci_reset(phb->opal_id,
- OPAL_RESET_PHB_ERROR,
- OPAL_ASSERT_RESET);
- if (rc != OPAL_SUCCESS) {
- pr_warn("%s: Failure %lld clearing "
- "error injection registers\n",
- __func__, rc);
- return -EIO;
- }
+ /*
+ * The frozen PE might be caused by PAPR error injection
+ * registers, which are expected to be cleared after hitting
+ * frozen PE as stated in the hardware spec. Unfortunately,
+ * that's not true on P7IOC. So we have to clear it manually
+ * to avoid recursive EEH errors during recovery.
+ */
+ phb = hose->private_data;
+ if (phb->model == PNV_PHB_MODEL_P7IOC &&
+ (option == EEH_RESET_HOT ||
+ option == EEH_RESET_FUNDAMENTAL)) {
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_ERROR,
+ OPAL_ASSERT_RESET);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("%s: Failure %lld clearing error injection registers\n",
+ __func__, rc);
+ return -EIO;
}
-
- bus = eeh_pe_bus_get(pe);
- if (pe->type & EEH_PE_VF)
- ret = pnv_eeh_reset_vf_pe(pe, option);
- else if (pci_is_root_bus(bus) ||
- pci_is_root_bus(bus->parent))
- ret = pnv_eeh_root_reset(hose, option);
- else
- ret = pnv_eeh_bridge_reset(bus->self, option);
}
- return ret;
+ bus = eeh_pe_bus_get(pe);
+ if (pe->type & EEH_PE_VF)
+ return pnv_eeh_reset_vf_pe(pe, option);
+
+ if (pci_is_root_bus(bus) ||
+ pci_is_root_bus(bus->parent))
+ return pnv_eeh_root_reset(hose, option);
+
+ return pnv_eeh_bridge_reset(bus->self, option);
}
/**
--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
