On Wed, Apr 13, 2016 at 06:29:42PM +1000, Alexey Kardashevskiy wrote:
>On 02/17/2016 02:43 PM, Gavin Shan wrote:
>>Currently, there is one macro (TCE32_TABLE_SIZE) representing the
>>TCE table size for one DMA32 segment. The constant representing
>>the DMA32 segment size (1 << 28) is still used in the code.
>>
>>This defines PNV_IODA1_DMA32_SEGSIZE representing one DMA32
>>segment size. the TCE table size can be calcualted when the page
>
>s/calcualted/calculated/
>
>
>>has fixed 4KB size. So all the related calculation depends on one
>>macro (PNV_IODA1_DMA32_SEGSIZE). No logical changes introduced.
>
>Please move PNV_IODA1_DMA32_SEGSIZE where TCE32_TABLE_SIZE was.
>
>
>>
>>Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
>>---
>> arch/powerpc/platforms/powernv/pci-ioda.c | 30 +++++++++++++++++-------------
>> arch/powerpc/platforms/powernv/pci.h | 1 +
>> 2 files changed, 18 insertions(+), 13 deletions(-)
>>
>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>>index d18b95e..e60cff6 100644
>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>@@ -48,9 +48,6 @@
>> #include "powernv.h"
>> #include "pci.h"
>>
>>-/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
>>-#define TCE32_TABLE_SIZE ((0x10000000 / 0x1000) * 8)
>>-
>> #define POWERNV_IOMMU_DEFAULT_LEVELS 1
>> #define POWERNV_IOMMU_MAX_LEVELS 5
>>
>>@@ -2034,7 +2031,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>>
>> struct page *tce_mem = NULL;
>> struct iommu_table *tbl;
>>- unsigned int i;
>>+ unsigned int tce32_segsz, i;
>
>
>PNV_IODA1_DMA32_SEGSIZE is a segment size in bytes. The name @tce32_segsz
>also suggests that it is a segment size in bytes (otherwise it would be
>tce32_seg_entries or something like this) but it is not, it is a number of
>TCE entries (arch/powerpc/kernel/iommu.c uses "entry" for these). And
>tce32_segsz never changes. So:
>
>const unsigned int entries = PNV_IODA1_DMA32_SEGSIZE >> (IOMMU_PAGE_SHIFT_4K
>- 3);
>
Are you sure @tce32_segsz and equation you gave are for number of TCE entries,
not the size of meory required for the DMA32 segment TCE table?
>> int64_t rc;
>> void *addr;
>>
>>@@ -2054,29 +2051,34 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>> /* Grab a 32-bit TCE table */
>> pe->tce32_seg = base;
>> pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
>>- (base << 28), ((base + segs) << 28) - 1);
>>+ base * PNV_IODA1_DMA32_SEGSIZE,
>>+ (base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
>>
>> /* XXX Currently, we allocate one big contiguous table for the
>> * TCEs. We only really need one chunk per 256M of TCE space
>> * (ie per segment) but that's an optimization for later, it
>> * requires some added smarts with our get/put_tce implementation
>>+ *
>>+ * Each TCE page is 4KB in size and each TCE entry occupies 8
>>+ * bytes
>> */
>>+ tce32_segsz = PNV_IODA1_DMA32_SEGSIZE >> (IOMMU_PAGE_SHIFT_4K - 3);
>
>> tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
>>- get_order(TCE32_TABLE_SIZE * segs));
>>+ get_order(tce32_segsz * segs));
>> if (!tce_mem) {
>> pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
>> goto fail;
>> }
>> addr = page_address(tce_mem);
>>- memset(addr, 0, TCE32_TABLE_SIZE * segs);
>>+ memset(addr, 0, tce32_segsz * segs);
>>
>> /* Configure HW */
>> for (i = 0; i < segs; i++) {
>> rc = opal_pci_map_pe_dma_window(phb->opal_id,
>> pe->pe_number,
>> base + i, 1,
>>- __pa(addr) + TCE32_TABLE_SIZE * i,
>>- TCE32_TABLE_SIZE, 0x1000);
>>+ __pa(addr) + tce32_segsz * i,
>>+ tce32_segsz, 0x1000);
>
>
>As you started using IOMMU_PAGE_SHIFT_4K and you are also touching this piece
>of code -
>
>s/0x1000/IOMMU_PAGE_SHIFT_4K/
>
Does 0x1000 is equal to IOMMU_PAGE_SHIFT_4K? I guess you probably suggested
to use IOMMU_PAGE_SIZE_4K instead?
>> if (rc) {
>> pe_err(pe, " Failed to configure 32-bit TCE table,"
>> " err %ld\n", rc);
>>@@ -2085,8 +2087,9 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>> }
>>
>> /* Setup linux iommu table */
>>- pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
>>- base << 28, IOMMU_PAGE_SHIFT_4K);
>>+ pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
>>+ base * PNV_IODA1_DMA32_SEGSIZE,
>>+ IOMMU_PAGE_SHIFT_4K);
>>
>> /* OPAL variant of P7IOC SW invalidated TCEs */
>> if (phb->ioda.tce_inval_reg)
>>@@ -2116,7 +2119,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>> if (pe->tce32_seg >= 0)
>> pe->tce32_seg = -1;
>> if (tce_mem)
>>- __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
>>+ __free_pages(tce_mem, get_order(tce32_segsz * segs));
>> if (tbl) {
>> pnv_pci_unlink_table_and_group(tbl, &pe->table_group);
>> iommu_free_table(tbl, "pnv");
>>@@ -3445,7 +3448,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>> mutex_init(&phb->ioda.pe_list_mutex);
>>
>> /* Calculate how many 32-bit TCE segments we have */
>>- phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
>>+ phb->ioda.tce32_count = phb->ioda.m32_pci_base /
>>+ PNV_IODA1_DMA32_SEGSIZE;
>>
>> #if 0 /* We should really do that ... */
>> rc = opal_pci_set_phb_mem_window(opal->phb_id,
>>diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
>>index 00539ff..1d8e775 100644
>>--- a/arch/powerpc/platforms/powernv/pci.h
>>+++ b/arch/powerpc/platforms/powernv/pci.h
>>@@ -84,6 +84,7 @@ struct pnv_ioda_pe {
>>
>> #define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */
>> #define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */
>>+#define PNV_IODA1_DMA32_SEGSIZE 0x10000000
>>
>> #define PNV_PHB_FLAG_EEH (1 << 0)
>>
>>
>
>
>--
>Alexey
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
