Hi Gabriele, On Mon, Feb 08, 2016 at 01:03:16PM +0000, Gabriele Paoloni wrote: > > -----Original Message----- > > From: linux-pci-owner@xxxxxxxxxxxxxxx [mailto:linux-pci- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Joao Pinto > > Sent: 08 February 2016 12:44 > > To: helgaas@xxxxxxxxxx > > Cc: arnd@xxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux- > > kernel@xxxxxxxxxxxxxxx; CARLOS.PALMINHA@xxxxxxxxxxxx; Joao Pinto > > Subject: [PATCH] link up validation moved to pcie-designware > > > > This patch goal is to centralize in pcie-designware the link up > > validation. A new function was added to pci-designware that is > > responsible for doing such a task. This was implemented in a form that > > permits flexibility for all SoCs. > > Looking at the patch I don't think this is really needed, > it seems to me like it makes more confusion in reading the > drivers code. > > It is clear that each HW IP has got his own transient time > in setting the link up, this is clear looking at the code > of the single drivers now. > > With the modification you are proposing we are seeing > drivers calls with magic numbers and the need for the > reader to go and look into the designware framework to > understand a function that is not even designware > specific (in fact all these drivers need to wait different > times according to their HW IP and some other drivers do > not need to wait at all...) Thanks for taking a look at this, Gabriele. If it's feasible, my preference is to have a single shared timeout loop rather than several copies that are implemented slightly differently. I don't know the hardware variants, so it's quite likely that they may actually have different timeout requirements as you suggest. For example, one board might be able to give up after 0.1 second, while another might want to continue waiting for up to 1.0 second. But I'm not sure there's real value in tightening this up per-board. It seems like using the maximum timeout, e.g., 1.0 second, for everybody would be sufficient, even if it makes the first board wait longer than it needs to. After all, something is already wrong if the link didn't come up, so waiting an extra 0.9 second in a failure case doesn't seem like a problem. > > Signed-off-by: Joao Pinto <jpinto@xxxxxxxxxxxx> > > --- > > drivers/pci/host/pci-dra7xx.c | 11 +++-------- > > drivers/pci/host/pci-exynos.c | 11 ++--------- > > drivers/pci/host/pci-imx6.c | 11 +++-------- > > drivers/pci/host/pcie-designware.c | 20 ++++++++++++++++++++ > > drivers/pci/host/pcie-designware.h | 2 ++ > > drivers/pci/host/pcie-spear13xx.c | 12 ++---------- > > 6 files changed, 32 insertions(+), 35 deletions(-) > > > > diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci- > > dra7xx.c > > index 8c36880..e425944 100644 > > --- a/drivers/pci/host/pci-dra7xx.c > > +++ b/drivers/pci/host/pci-dra7xx.c > > @@ -10,7 +10,6 @@ > > * published by the Free Software Foundation. > > */ > > > > -#include <linux/delay.h> > > #include <linux/err.h> > > #include <linux/interrupt.h> > > #include <linux/irq.h> > > @@ -108,7 +107,6 @@ static int dra7xx_pcie_establish_link(struct > > pcie_port *pp) > > { > > struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp); > > u32 reg; > > - unsigned int retries; > > > > if (dw_pcie_link_up(pp)) { > > dev_err(pp->dev, "link is already up\n"); > > @@ -119,13 +117,10 @@ static int dra7xx_pcie_establish_link(struct > > pcie_port *pp) > > reg |= LTSSM_EN; > > dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg); > > > > - for (retries = 0; retries < 1000; retries++) { > > - if (dw_pcie_link_up(pp)) > > - return 0; > > - usleep_range(10, 20); > > - } > > + /* check if the link is up or not */ > > + if (!dw_pcie_check_link_is_up(pp, 1000, 10, 20)) > > + return 0; > > > > - dev_err(pp->dev, "link is not up\n"); > > return -EINVAL; > > } > > > > diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/host/pci- > > exynos.c > > index 01095e1..770c45a 100644 > > --- a/drivers/pci/host/pci-exynos.c > > +++ b/drivers/pci/host/pci-exynos.c > > @@ -318,7 +318,6 @@ static int exynos_pcie_establish_link(struct > > pcie_port *pp) > > { > > struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp); > > u32 val; > > - unsigned int retries; > > > > if (dw_pcie_link_up(pp)) { > > dev_err(pp->dev, "Link already up\n"); > > @@ -357,13 +356,8 @@ static int exynos_pcie_establish_link(struct > > pcie_port *pp) > > PCIE_APP_LTSSM_ENABLE); > > > > /* check if the link is up or not */ > > - for (retries = 0; retries < 10; retries++) { > > - if (dw_pcie_link_up(pp)) { > > - dev_info(pp->dev, "Link up\n"); > > - return 0; > > - } > > - mdelay(100); > > - } > > + if (!dw_pcie_check_link_is_up(pp, 10, 100000, 110000)) > > + return 0; > > > > while (exynos_phy_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED) == 0) { > > val = exynos_blk_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED); > > @@ -372,7 +366,6 @@ static int exynos_pcie_establish_link(struct > > pcie_port *pp) > > /* power off phy */ > > exynos_pcie_power_off_phy(pp); > > > > - dev_err(pp->dev, "PCIe Link Fail\n"); > > return -EINVAL; > > } > > > > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > > index 22e8224..9e323be 100644 > > --- a/drivers/pci/host/pci-imx6.c > > +++ b/drivers/pci/host/pci-imx6.c > > @@ -330,15 +330,10 @@ static void imx6_pcie_init_phy(struct pcie_port > > *pp) > > > > static int imx6_pcie_wait_for_link(struct pcie_port *pp) > > { > > - unsigned int retries; > > - > > - for (retries = 0; retries < 200; retries++) { > > - if (dw_pcie_link_up(pp)) > > - return 0; > > - usleep_range(100, 1000); > > - } > > + /* check if the link is up or not */ > > + if (!dw_pcie_check_link_is_up(pp, 200, 100, 1000)) > > + return 0; > > > > - dev_err(pp->dev, "phy link never came up\n"); > > dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", > > readl(pp->dbi_base + PCIE_PHY_DEBUG_R0), > > readl(pp->dbi_base + PCIE_PHY_DEBUG_R1)); > > diff --git a/drivers/pci/host/pcie-designware.c > > b/drivers/pci/host/pcie-designware.c > > index 540f077..6725231 100644 > > --- a/drivers/pci/host/pcie-designware.c > > +++ b/drivers/pci/host/pcie-designware.c > > @@ -22,6 +22,7 @@ > > #include <linux/pci_regs.h> > > #include <linux/platform_device.h> > > #include <linux/types.h> > > +#include <linux/delay.h> > > > > #include "pcie-designware.h" > > > > @@ -380,6 +381,25 @@ static struct msi_controller dw_pcie_msi_chip = { > > .teardown_irq = dw_msi_teardown_irq, > > }; > > > > +int dw_pcie_check_link_is_up(struct pcie_port *pp, int max_ret, int > > sleep_min, > > + int sleep_max) > > +{ > > + int retries; > > + > > + /* check if the link is up or not */ > > + for (retries = 0; retries < max_ret; retries++) { > > + if (dw_pcie_link_up(pp)) { > > + dev_info(pp->dev, "link up\n"); > > + return 0; > > + } > > + usleep_range(sleep_min, sleep_max); > > + } > > + > > + dev_err(pp->dev, "phy link never came up\n"); > > + > > + return 1; > > +} > > + > > int dw_pcie_link_up(struct pcie_port *pp) > > { > > if (pp->ops->link_up) > > diff --git a/drivers/pci/host/pcie-designware.h > > b/drivers/pci/host/pcie-designware.h > > index 2356d29..b077fe0 100644 > > --- a/drivers/pci/host/pcie-designware.h > > +++ b/drivers/pci/host/pcie-designware.h > > @@ -76,6 +76,8 @@ int dw_pcie_cfg_read(void __iomem *addr, int size, > > u32 *val); > > int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val); > > irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); > > void dw_pcie_msi_init(struct pcie_port *pp); > > +int dw_pcie_check_link_is_up(struct pcie_port *pp, int max_ret, int > > sleep_min, > > + int sleep_max); > > int dw_pcie_link_up(struct pcie_port *pp); > > void dw_pcie_setup_rc(struct pcie_port *pp); > > int dw_pcie_host_init(struct pcie_port *pp); > > diff --git a/drivers/pci/host/pcie-spear13xx.c b/drivers/pci/host/pcie- > > spear13xx.c > > index b95b756..5c24595 100644 > > --- a/drivers/pci/host/pcie-spear13xx.c > > +++ b/drivers/pci/host/pcie-spear13xx.c > > @@ -13,7 +13,6 @@ > > */ > > > > #include <linux/clk.h> > > -#include <linux/delay.h> > > #include <linux/interrupt.h> > > #include <linux/kernel.h> > > #include <linux/module.h> > > @@ -149,7 +148,6 @@ static int spear13xx_pcie_establish_link(struct > > pcie_port *pp) > > struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); > > struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; > > u32 exp_cap_off = EXP_CAP_ID_OFFSET; > > - unsigned int retries; > > > > if (dw_pcie_link_up(pp)) { > > dev_err(pp->dev, "link already up\n"); > > @@ -201,15 +199,9 @@ static int spear13xx_pcie_establish_link(struct > > pcie_port *pp) > > &app_reg->app_ctrl_0); > > > > /* check if the link is up or not */ > > - for (retries = 0; retries < 10; retries++) { > > - if (dw_pcie_link_up(pp)) { > > - dev_info(pp->dev, "link up\n"); > > - return 0; > > - } > > - mdelay(100); > > - } > > + if (!dw_pcie_check_link_is_up(pp, 10, 100000, 110000)) > > + return 0; > > > > - dev_err(pp->dev, "link Fail\n"); > > return -EINVAL; > > } > > > > -- > > 1.8.1.5 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
