Re: [PATCH v7 19/50] powerpc/powernv: Track DMA32 segment consumption

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 17, 2015 at 11:28:20AM +1100, Daniel Axtens wrote:
>Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx> writes:
>
>> Similar to the mechanism tracking consumed IO/M32/M64 segments,
>> this introduces an array for each PHB to track the consumed DMA32
>> segments, which are going to be released on PCI unplugging time.
>> The index of the array is the DMA32 segment number while the value
>> stored in the element is the assigned PE number.
>>
>
>
>> +	/* Setup TCE32 segment mapping */
>Do you mean DMA32 rather than TCE32?

Right, will change it to "DMA32" in next revision.

>> +	for (i = base; i < base + segs; i++)
>> +		phb->ioda.dma32_segmap[i] = pe->pe_number;
>> +
>I'm pretty sure this is right, but can you just confirm that you
>intended to index into the array starting at base and going to base + segs,
>and not going from 0 to segs? (i.e. not dma32_segmap[i - base]).
>

I think you're saying "I'm not pretty sure this is right". The code doesn't
have problem here: it starts from @base.

>Otherwise looks good.
>
>
>>  	/* Setup linux iommu table */
>>  	pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
>>  				  base * PNV_IODA1_DMA32_SEGSIZE,
>> @@ -2378,13 +2382,13 @@ static void pnv_pci_ioda1_setup_dma(struct pnv_phb *phb)
>>  	 * then we assign at least one segment per PE, plus more based
>>  	 * on the amount of devices under that PE
>>  	 */
>> -	if (dma_pe_count > phb->ioda.tce32_count)
>> +	if (dma_pe_count > phb->ioda.dma32_count)
>>  		residual = 0;
>>  	else
>> -		residual = phb->ioda.tce32_count - dma_pe_count;
>> +		residual = phb->ioda.dma32_count - dma_pe_count;
>>  
>>  	pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
>> -		hose->global_number, phb->ioda.tce32_count);
>> +		hose->global_number, phb->ioda.dma32_count);
>>  	pr_info("PCI: %d PE# for a total weight of %d\n",
>>  		dma_pe_count, total_weight);
>>  
>> @@ -2394,7 +2398,7 @@ static void pnv_pci_ioda1_setup_dma(struct pnv_phb *phb)
>>  	 * out one base segment plus any residual segments based on
>>  	 * weight
>>  	 */
>> -	remaining = phb->ioda.tce32_count;
>> +	remaining = phb->ioda.dma32_count;
>>  	base = 0;
>>  	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
>>  		weight = pnv_pci_ioda_pe_dma_weight(pe);
>> @@ -3094,7 +3098,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>>  {
>>  	struct pci_controller *hose;
>>  	struct pnv_phb *phb;
>> -	unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0;
>> +	unsigned long size, m64map_off, m32map_off, pemap_off;
>> +	unsigned long iomap_off = 0, dma32map_off = 0;
>>  	const __be64 *prop64;
>>  	const __be32 *prop32;
>>  	int i, len;
>> @@ -3177,6 +3182,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>>  	phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num;
>>  	phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
>>  
>> +	/* Calculate how many 32-bit TCE segments we have */
>> +	phb->ioda.dma32_count = phb->ioda.m32_pci_base /
>> +				PNV_IODA1_DMA32_SEGSIZE;
>> +
>>  	/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
>>  	size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long));
>>  	m64map_off = size;
>> @@ -3186,6 +3195,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>>  	if (phb->type == PNV_PHB_IODA1) {
>>  		iomap_off = size;
>>  		size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]);
>> +		dma32map_off = size;
>> +		size += phb->ioda.dma32_count *
>> +			sizeof(phb->ioda.dma32_segmap[0]);
>>  	}
>>  	pemap_off = size;
>>  	size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe);
>> @@ -3201,6 +3213,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>>  		phb->ioda.io_segmap = aux + iomap_off;
>>  		for (i = 0; i < phb->ioda.total_pe_num; i++)
>>  			phb->ioda.io_segmap[i] = IODA_INVALID_PE;
>> +
>> +		phb->ioda.dma32_segmap = aux + dma32map_off;
>> +		for (i = 0; i < phb->ioda.dma32_count; i++)
>> +			phb->ioda.dma32_segmap[i] = IODA_INVALID_PE;
>>  	}
>>  	phb->ioda.pe_array = aux + pemap_off;
>>  	set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc);
>> @@ -3208,10 +3224,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>>  	INIT_LIST_HEAD(&phb->ioda.pe_list);
>>  	mutex_init(&phb->ioda.pe_list_mutex);
>>  
>> -	/* Calculate how many 32-bit TCE segments we have */
>> -	phb->ioda.tce32_count = phb->ioda.m32_pci_base /
>> -				PNV_IODA1_DMA32_SEGSIZE;
>> -
>>  #if 0 /* We should really do that ... */
>>  	rc = opal_pci_set_phb_mem_window(opal->phb_id,
>>  					 window_type,
>> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
>> index 2038ef2..0802fcd 100644
>> --- a/arch/powerpc/platforms/powernv/pci.h
>> +++ b/arch/powerpc/platforms/powernv/pci.h
>> @@ -148,6 +148,10 @@ struct pnv_phb {
>>  			int			*m32_segmap;
>>  			int			*io_segmap;
>>  
>> +			/* DMA32 segment maps - IODA1 only */
>> +			unsigned long		dma32_count;
>> +			int			*dma32_segmap;
>> +
>>  			/* IRQ chip */
>>  			int			irq_chip_init;
>>  			struct irq_chip		irq_chip;
>> @@ -164,9 +168,6 @@ struct pnv_phb {
>>  			 */
>>  			unsigned char		pe_rmap[0x10000];
>>  
>> -			/* 32-bit TCE tables allocation */
>> -			unsigned long		tce32_count;
>> -
>>  			/* TCE cache invalidate registers (physical and
>>  			 * remapped)
>>  			 */

Thanks,
Gavin

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux