Similar to the mechanism tracking consumed IO/M32/M64 segments,
this introduces an array for each PHB to track the consumed DMA32
segments, which are going to be released on PCI unplugging time.
The index of the array is the DMA32 segment number while the value
stored in the element is the assigned PE number.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 30 +++++++++++++++++++++---------
arch/powerpc/platforms/powernv/pci.h | 7 ++++---
2 files changed, 25 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 20ebe6e..fdbc012 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1885,6 +1885,10 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
}
}
+ /* Setup TCE32 segment mapping */
+ for (i = base; i < base + segs; i++)
+ phb->ioda.dma32_segmap[i] = pe->pe_number;
+
/* Setup linux iommu table */
pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
base * PNV_IODA1_DMA32_SEGSIZE,
@@ -2378,13 +2382,13 @@ static void pnv_pci_ioda1_setup_dma(struct pnv_phb *phb)
* then we assign at least one segment per PE, plus more based
* on the amount of devices under that PE
*/
- if (dma_pe_count > phb->ioda.tce32_count)
+ if (dma_pe_count > phb->ioda.dma32_count)
residual = 0;
else
- residual = phb->ioda.tce32_count - dma_pe_count;
+ residual = phb->ioda.dma32_count - dma_pe_count;
pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
- hose->global_number, phb->ioda.tce32_count);
+ hose->global_number, phb->ioda.dma32_count);
pr_info("PCI: %d PE# for a total weight of %d\n",
dma_pe_count, total_weight);
@@ -2394,7 +2398,7 @@ static void pnv_pci_ioda1_setup_dma(struct pnv_phb *phb)
* out one base segment plus any residual segments based on
* weight
*/
- remaining = phb->ioda.tce32_count;
+ remaining = phb->ioda.dma32_count;
base = 0;
list_for_each_entry(pe, &phb->ioda.pe_list, list) {
weight = pnv_pci_ioda_pe_dma_weight(pe);
@@ -3094,7 +3098,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
{
struct pci_controller *hose;
struct pnv_phb *phb;
- unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0;
+ unsigned long size, m64map_off, m32map_off, pemap_off;
+ unsigned long iomap_off = 0, dma32map_off = 0;
const __be64 *prop64;
const __be32 *prop32;
int i, len;
@@ -3177,6 +3182,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num;
phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
+ /* Calculate how many 32-bit TCE segments we have */
+ phb->ioda.dma32_count = phb->ioda.m32_pci_base /
+ PNV_IODA1_DMA32_SEGSIZE;
+
/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long));
m64map_off = size;
@@ -3186,6 +3195,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
if (phb->type == PNV_PHB_IODA1) {
iomap_off = size;
size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]);
+ dma32map_off = size;
+ size += phb->ioda.dma32_count *
+ sizeof(phb->ioda.dma32_segmap[0]);
}
pemap_off = size;
size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe);
@@ -3201,6 +3213,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
phb->ioda.io_segmap = aux + iomap_off;
for (i = 0; i < phb->ioda.total_pe_num; i++)
phb->ioda.io_segmap[i] = IODA_INVALID_PE;
+
+ phb->ioda.dma32_segmap = aux + dma32map_off;
+ for (i = 0; i < phb->ioda.dma32_count; i++)
+ phb->ioda.dma32_segmap[i] = IODA_INVALID_PE;
}
phb->ioda.pe_array = aux + pemap_off;
set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc);
@@ -3208,10 +3224,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
INIT_LIST_HEAD(&phb->ioda.pe_list);
mutex_init(&phb->ioda.pe_list_mutex);
- /* Calculate how many 32-bit TCE segments we have */
- phb->ioda.tce32_count = phb->ioda.m32_pci_base /
- PNV_IODA1_DMA32_SEGSIZE;
-
#if 0 /* We should really do that ... */
rc = opal_pci_set_phb_mem_window(opal->phb_id,
window_type,
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 2038ef2..0802fcd 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -148,6 +148,10 @@ struct pnv_phb {
int *m32_segmap;
int *io_segmap;
+ /* DMA32 segment maps - IODA1 only */
+ unsigned long dma32_count;
+ int *dma32_segmap;
+
/* IRQ chip */
int irq_chip_init;
struct irq_chip irq_chip;
@@ -164,9 +168,6 @@ struct pnv_phb {
*/
unsigned char pe_rmap[0x10000];
- /* 32-bit TCE tables allocation */
- unsigned long tce32_count;
-
/* TCE cache invalidate registers (physical and
* remapped)
*/
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
