Re: [PATCH v7 14/50] powerpc/powernv: M64 support on P7IOC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 16, 2015 at 07:02:03PM +1100, Alexey Kardashevskiy wrote:
>On 11/05/2015 12:12 AM, Gavin Shan wrote:
>>This enables M64 window on P7IOC, which has been enabled on PHB3.
>>Different from PHB3 where 16 M64 BARs are supported and each of
>>them can be owned by one particular PE# exclusively or divided
>>evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
>>of them are divided to 8 segments. So every P7IOC PHB supports
>>128 M64 segments in total. P7IOC has M64DT, which helps mapping
>>one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
>>M64DT, indicating that one M64 segment can only be pinned to the
>>fixed PE#. In order to have same code to support M64 on P7IOC and
>>PHB3, we just provide 128 M64 segments on every P7IOC PHB and each
>>of them is pinned to the fixed PE# by bypassing the function of
>>M64DT. In turn, we just need different phb->init_m64() for P7IOC
>>and PHB3 to support M64.
>>
>>Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
>>---
>>  arch/powerpc/platforms/powernv/pci-ioda.c | 86 +++++++++++++++++++++++++++++--
>>  arch/powerpc/platforms/powernv/pci.h      |  3 ++
>>  2 files changed, 86 insertions(+), 3 deletions(-)
>>
>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>>index 1f7d985..bfe69f1 100644
>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>@@ -256,6 +256,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
>>  	}
>>  }
>>
>>+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
>>+{
>>+	struct resource *r;
>>+	int index;
>>+
>>+	/*
>>+	 * There are 16 M64 BARs, each of which has 8 segments. So
>>+	 * there are as many M64 segments as the maximum number of
>>+	 * PEs, which is 128.
>>+	 */
>>+	for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
>>+		unsigned long base, segsz = phb->ioda.m64_segsize;
>>+		int64_t rc;
>>+
>>+		base = phb->ioda.m64_base +
>>+		       index * PNV_IODA1_M64_SEGS * segsz;
>>+		rc = opal_pci_set_phb_mem_window(phb->opal_id,
>>+				OPAL_M64_WINDOW_TYPE, index, base, 0,
>>+				PNV_IODA1_M64_SEGS * segsz);
>>+		if (rc != OPAL_SUCCESS) {
>>+			pr_warn("  Error %lld setting M64 PHB#%d-BAR#%d\n",
>>+				rc, phb->hose->global_number, index);
>>+			goto fail;
>>+		}
>>+
>>+		rc = opal_pci_phb_mmio_enable(phb->opal_id,
>>+				OPAL_M64_WINDOW_TYPE, index,
>>+				OPAL_ENABLE_M64_SPLIT);
>>+		if (rc != OPAL_SUCCESS) {
>>+			pr_warn("  Error %lld enabling M64 PHB#%d-BAR#%d\n",
>>+				rc, phb->hose->global_number, index);
>>+			goto fail;
>>+		}
>>+	}
>>+
>>+	/*
>>+	 * Exclude the segment used by the reserved PE, which
>>+	 * is expected to be 0 or last supported PE#.
>>+	 */
>>+	r = &phb->hose->mem_resources[1];
>
>
>What does "1" mean here? A bridge's 64bit prefetchable window?
>

It's PHB's M64 window.

>
>>+	if (phb->ioda.reserved_pe_idx == 0)
>>+		r->start += phb->ioda.m64_segsize;
>>+	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
>>+		r->end -= phb->ioda.m64_segsize;
>>+	else
>>+		pr_warn("  Cannot cut M64 segment for reserved PE#%d\n",
>>+			phb->ioda.reserved_pe_idx);
>>+

Thanks,
Gavin

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux