On 11/05/2015 12:12 AM, Gavin Shan wrote:
This enables M64 window on P7IOC, which has been enabled on PHB3.
Different from PHB3 where 16 M64 BARs are supported and each of
them can be owned by one particular PE# exclusively or divided
evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
of them are divided to 8 segments. So every P7IOC PHB supports
128 M64 segments in total. P7IOC has M64DT, which helps mapping
one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
M64DT, indicating that one M64 segment can only be pinned to the
fixed PE#. In order to have same code to support M64 on P7IOC and
PHB3, we just provide 128 M64 segments on every P7IOC PHB and each
of them is pinned to the fixed PE# by bypassing the function of
M64DT. In turn, we just need different phb->init_m64() for P7IOC
and PHB3 to support M64.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 86 +++++++++++++++++++++++++++++--
arch/powerpc/platforms/powernv/pci.h | 3 ++
2 files changed, 86 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 1f7d985..bfe69f1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -256,6 +256,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
}
}
+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
+{
+ struct resource *r;
+ int index;
+
+ /*
+ * There are 16 M64 BARs, each of which has 8 segments. So
+ * there are as many M64 segments as the maximum number of
+ * PEs, which is 128.
+ */
+ for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
+ unsigned long base, segsz = phb->ioda.m64_segsize;
+ int64_t rc;
+
+ base = phb->ioda.m64_base +
+ index * PNV_IODA1_M64_SEGS * segsz;
+ rc = opal_pci_set_phb_mem_window(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE, index, base, 0,
+ PNV_IODA1_M64_SEGS * segsz);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn(" Error %lld setting M64 PHB#%d-BAR#%d\n",
+ rc, phb->hose->global_number, index);
+ goto fail;
+ }
+
+ rc = opal_pci_phb_mmio_enable(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE, index,
+ OPAL_ENABLE_M64_SPLIT);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn(" Error %lld enabling M64 PHB#%d-BAR#%d\n",
+ rc, phb->hose->global_number, index);
+ goto fail;
+ }
+ }
+
+ /*
+ * Exclude the segment used by the reserved PE, which
+ * is expected to be 0 or last supported PE#.
+ */
+ r = &phb->hose->mem_resources[1];
What does "1" mean here? A bridge's 64bit prefetchable window?
+ if (phb->ioda.reserved_pe_idx == 0)
+ r->start += phb->ioda.m64_segsize;
+ else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
+ r->end -= phb->ioda.m64_segsize;
+ else
+ pr_warn(" Cannot cut M64 segment for reserved PE#%d\n",
+ phb->ioda.reserved_pe_idx);
+
--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
